nopi98

Пікірлер

@OvaHendrix-j4t Ай бұрын

Great trucks I've had MI e for six years now an its a 2009 p!at I um 4*4 an never had a problems a its @ 5.4L

@RyanRamos-n4l 2 ай бұрын

Love them

@cbearabc 4 ай бұрын

I have found, putting in the bottom bolt first is a little easier?

@satoshinakamotocross 8 ай бұрын

Thank you very much, this made it very easy for me. I got value out of this, and would like to return some. Post a Bitcoin address and I’ll send you some sats.

@amaruvargas5556 Жыл бұрын

Straight to the point, love it👍

@a2wheelsoul766 Жыл бұрын

Just seeing this video and am probably going to be getting the 2 into 1 setup very soon myself. I was wondering if you knew what kind of jet size and fuel/air mix changes y'all may have had to do for that setup?

@nopi98 Жыл бұрын

According to a couple of the Facebook pages im a member of you do not need to mess with the jetting All you were doing is changing the exhaust. You only need to change the jetting when you mess with the incoming air.

@a2wheelsoul766 Жыл бұрын

@@nopi98 gotcha gotcha 🤙

@johns.6570 Жыл бұрын

Not bad only 13 pulls to start it..

@bbf46 Жыл бұрын

IS those pipes Cobra 2173SC?

@nopi98 Жыл бұрын

I belueve so, yes

@eduardoocanas5610 Жыл бұрын

Is it stiffer with out load?

@nopi98 Жыл бұрын

If I’m honest I haven’t really noticed.

@quickprofitautoworks 2 жыл бұрын

May i ask why was the bilsten piston facing downward and the monroe the otherway

@nopi98 2 жыл бұрын

I hope this doesn’t sound like being a smart Alec but what you described in your question is the right side up for each of those shocks.

@quickprofitautoworks 2 жыл бұрын

@@nopi98 go to time 1:50. The bilsten shock piston is facing downward “how you had it installed” dust boot on bottom Then u installed monroe shock with piston facing upwards. And spring on top. I never seen that. This is why i am asking. Does the bilsten shock call for being in that direction

@nopi98 2 жыл бұрын

@@quickprofitautoworks im pretty sure i just put the bilstein shock in the same way the factory shock was mounted.

@kraxus1325 2 жыл бұрын

Is this sound without silincer?? Sounds great 👍🏻

@nopi98 2 жыл бұрын

These are cobra slash cut slip ons, and the baffles are in them

@StuntCult 2 жыл бұрын

hey I had a pair of the cobra slip ons I was thinking about getting the 2 in 1 exhaust. which one would you say is louder of the two?

@nopi98 2 жыл бұрын

I guess if you’re only going for loudness I would have to say that the slip on’s were louder. But there is definitely a different tone in the two.

@natenunez1793 2 жыл бұрын

Which do you recommend the cobra slashcut slip ons or the cobra drag slip ons?

@nopi98 2 жыл бұрын

I dont know anything about the cobra drag slip ons…sorry

@superior3384 2 жыл бұрын

Your the perfect person to ask from your Bilstein shocks to these how does it ride. Would you say it's stiffer and less body roll?

@nopi98 2 жыл бұрын

If I’m honest, I dont notice things like body roll etc. I basically got the load adjusting shocks to level out the lift I have on the front.

@vstar7196 3 жыл бұрын

Sounds like crap.

@nopi98 3 жыл бұрын

Sorry you feel that way🤷🏻‍♂️

@murrayjonasson 2 жыл бұрын

@@nopi98 sounds awesome bro

@djomarigamotea1735 3 жыл бұрын

Fam take off your ring its too tight

@nobullshiit5682 3 жыл бұрын

is there a left and right shock , driver side and passenger side ?

@nopi98 3 жыл бұрын

Yes

@RadhadaniteBabylonian 3 жыл бұрын

So, was that blue floor jack used to push up on the bottom of the shock to compress it and get it to set up for putting the bolt through?

@nopi98 3 жыл бұрын

Yes,

@weekendhomeprojects Жыл бұрын

Was wondering the same.

@ronaldsinger99 3 жыл бұрын

Nice Video for Cobra Slip on verses Cobra Power Pro HP. Exactly What I wanted to see. Thanks

@nopi98 3 жыл бұрын

Thank you for watching hopefully it helped.

@kennethmiller1654 3 жыл бұрын

Good vid piss poor sound.

@mosoworks619 3 жыл бұрын

How are they holding up now?

@nopi98 3 жыл бұрын

A year later and they are great. No issues.

@justinturtle2558 3 жыл бұрын

Very nice did you have to rejet?

@nopi98 3 жыл бұрын

I am told rejetting is not necessary with just exhaust. But it’s currently not running right. Not sure what the issue is but I’m slowly getting it narrowed down.

@justinturtle2558 3 жыл бұрын

Should only need to adjust air fuel screw and dont turn idle way down there not meant to idle low like a harley

@justinturtle2558 3 жыл бұрын

Did your exhaust happen to smoke for a bit after you installed heat shields?

@nopi98 3 жыл бұрын

@@justinturtle2558 i dont remember them doing that.

@CrystalLiko 3 жыл бұрын

Not bad. I’ve gotta 48spl on a 16 aluminum v hull at 31 mph. 17 pitch stainless steel. I’m sure I could do 34+ with tilt trim

@jamiewhitney5136 3 жыл бұрын

If the Monroe shocks came with the installation straps on the shocks it would of been a ten minute job...

@nopi98 3 жыл бұрын

Agreed

@94sn95gt 3 жыл бұрын

Im guessing monroe doesnt want to have lawsuits when idiots cut the strap holding that spring compression.

@davestir5743 3 жыл бұрын

It really wasn't that hard to get them into place, took 30 minutes for me both sides, with the tires still on.

@TheAlaskaAdam 2 жыл бұрын

use a ratchet strap to compress the shock, works like a charm.

@noahcarter1936 3 жыл бұрын

Do you still have it for sale

@nopi98 3 жыл бұрын

Sold

@joe1071 3 жыл бұрын

I slapped some Bilsteins on the rear of my f150 without noticeable difference in ride quality under normal and towing circumstances. She squats a lot with a 28' travel trailer hooked up. Weight distribution hitch helps, but still quite a bit of squat. Still happy with these during loaded and unloaded use? Would you do it again or try something else if you had a chance to do it over?

@nopi98 3 жыл бұрын

I’m happy with my results. Especially for the price I paid. Thanks for watching!

@theraifs8120 4 жыл бұрын

Great vid guy!

@nopi98 4 жыл бұрын

Thanks!

@kiaranelmes2690 4 жыл бұрын

This is without a doubt my favorite video

@kiaranelmes2690 4 жыл бұрын

You finally turned comments on!! 😂❤️ Also I bet I could last longer than he did!! 😂

@nopi98 4 жыл бұрын

I’ll pay to find out. We can do a follow-up video

@kiaranelmes2690 4 жыл бұрын

Let’s do it!! 👍🏽

@freeaudiobooks7469 4 жыл бұрын

How do you know stuff

@nopi98 4 жыл бұрын

Elaborate please.

@joseHernandez-xc4ix 4 жыл бұрын

I used a small Ratchet Strap to pull it into place

@TheReefRobber 4 жыл бұрын

Very nice shot! You got yourself a new sub here.

@nopi98 4 жыл бұрын

Earl Mast thank you kindly. I have returned the favor.

@TheReefRobber 4 жыл бұрын

nopi98 I really appreciate that!

@TheDudleyFamily 4 жыл бұрын

He almost made it. He brave for doing it. We have a family page and do challenges and lots more. Anyway you should check us out too..We need all the support we can get and would respectfully return the favor. 🙏😊And keep up the good work❤

@nopi98 4 жыл бұрын

The Dudley Family thanks and now sub’ed

@TheDudleyFamily 4 жыл бұрын

@@nopi98 Thank You- I have subscriber back- I'm subscriber number 28.

@freeaudiobooks7469 4 жыл бұрын

Good job. Thanks for the vid

@nopi98 4 жыл бұрын

Free Audio Books thank you for watching. Please consider subscribing.

@thelonestarcrew7120 4 жыл бұрын

JUST RECEIVED YOUR SUB AND THANK YOU FOR THAT 💙,WE JUST SUBSCRIBED TO YOUR CHANNEL AS WELL 👍👍💙💙💚😊,#26 HERE!!!!!!! PLEASE STAY IN TOUCH AND WELCOME TO "THE LONESTAR CREW 🇨🇱💙"

@thelonestarcrew7120 4 жыл бұрын

HI NOPI98!!👋, good stuff👍👍😉..We do the same type of CHALLENGES on our channel..We should colab on something one day😉...Anyway you should check us out too..We need all the support we can get and would respectfully return the favor 🤜🇨🇱💚.. stay safe🙏😊And keep up the good work❤💚🇨🇱

@nopi98 4 жыл бұрын

THE LONESTAR CREW subscribed. Thanks!

@woog74 4 жыл бұрын

How does it drive, loaded and unloaded? What do you think of those shocks vs the 5100s that you took off?

@nopi98 4 жыл бұрын

As far as the drive… I haven’t noticed a difference in ride quality between the 5100s and the new Monroe shocks. What I have noticed is that the rear end Stays in a “locked” position when I hook up things like my boat when before it used to sag pretty bad

@maidendos9514 4 жыл бұрын

You changed only the tails? I mean the last part of exhaust? Sounds amazing

@nopi98 4 жыл бұрын

Thank you. Yes I only changed the last part of the exhaust... it is the cheapest and easiest to get better sound. Although it does not aid in gaining horsepower. I have another video where I put on another set of full exhaust. You should go check it out.

@TheDurivage 4 жыл бұрын

Wow thank you so much! I’ve been watching V-Star 1100’s exhaust videos for almost a year, wondering what kind of Cobra exhaust I should put on. Your video clearly show the difference between those two! The slashcuts seem more high pitched while the 2 in 1 sound more low pitch and more v8 like under acceleration. I like that!

@nopi98 4 жыл бұрын

TheDurivage I’m glad my video helped you. And yes, you are right...the 2 into 1’s sound like a small block v8

@TheDurivage 4 жыл бұрын

nopi98 how is it on long rides? Is it enjoyable or not?

@nopi98 4 жыл бұрын

TheDurivage tbh...they are off the bike already...im selling them currently. The v8 sound wasnt my thing. I drove with them to work once and that’s a 40 mile round trip. At 55-60 mph they hum but nothing that was unbearable.

@nopi98 4 жыл бұрын

TheDurivage I had a buyer for the exhaust but it fell through so they are available for purchase if you’re interested. $450 plus actual shipping to your door.

@TheDurivage 4 жыл бұрын

nopi98 where are you located?

@nopi9865 4 жыл бұрын

True country

@shannonnelmes6258 5 жыл бұрын

Informative...thanks.

@alonzopeavy1804 6 жыл бұрын

Is it still available?

@nopi98 6 жыл бұрын

Alonzo Peavy It sold

@lilfishysminecraft6497 10 жыл бұрын

Nice shot, I learned that the squirrel is dead when it hits the ground but the nerve endings make it move

@nopi98 11 жыл бұрын

My apologies, I never posted what the actual problem was. As it turns out, it was my strut. The nut backed off and the shaft fell through the tower. Got it all back together and no problems since. Thank you for your input though. God bless.

@MrRevone 11 жыл бұрын

control ARM!!..

@MrRevone 11 жыл бұрын

control ball joints??

@chemistrator 12 жыл бұрын

If it's below 40 my teg creaks, it's been doing this for the past 7 years that I've owned it, no problems.

Ең жақсы KZbin

Пікірлер