Thank you for watching 🙏😊You're right, let's go fishing again, I'll be the one to take responsibility for it with GOD later...because this is a gift from him 👌🙏😉Thank's

Thank for watching 🙏😊 In general and most people use dropper loop ties and the ties cannot move, with this tool the ties will be free to move left or right depending on which fish attracts the bait. And the aim is to make it like this to reduce resistance when the fish pulls the bait. (especially on dead bait). This tool is actually used to have 2 functions, namely live bait and dead bait. For dead bait like dough as I show in the video with a weight in the middle. And with live bait, the hooks are usually attached to the head and tail, even in the middle I can add 1 more hook so that the total is 3 hooks (head, back and tail). Usually I only use 2 hooks. That's my explanation, I hope it helps, and thank you.

Thank you for watching 🙏😊use hook removal tool, If you still can't cut the line and let the hook stick and it will come off by itself, release the fish as soon as possible and don't forget to say thank you....By the way, how long have you been fishing ? ...

@@TheFishingStyle_FishingChannel long time haha

@@calloftheoutdoors8941 great, keep doing it 👍🙏😂😂😂

Thank you for watching 🙏😊 You should first understand what is meant by a stinger and this is different from the meaning of a hook that is baited ok, thank you...Doing anything costs money, it's as simple as this...Can you imagine what would happen if the bait entered the mouth of a big fish ???...

Thank you for watching 🙏😊

Thank you for watching 🙏😊 The working principle of this indicator is the same as line biter indicator fishing. Hang This Slip slider bobber indicator on Line in Front of Your Fishing Rod and Loosen Your Fishing Line from Reel Until It Has a 45 Degree Angle. Pay Attention to the Movement of the Bobber Fishing !!!... The Bobber Fishing Indicators Will Go Up if a Fish Moves Away From You or Down if the Fish Comes Towards You. For a Complete Explanation Like This : Using This Clip On to Your Mainline Just Above the Rod Tip and Slide Them Down the Line About 12 Feet or So and They Sit There Suspended On Your Line and What That Does Is Accentuate Any Line Movements ThatYou Get Out in the Water So It Picks Up Line Bites and Makes Them Easily Visible It Certainly Adds to the Tension Here Because As Soon as The Fish Start Feeding You Swim These Start Bouncing up and Down Your Line and You Just Know It’s About To Happen but You Don’t Know When So Sit on Your Hands Time and Wait for That Rod to Hoop Over. Thank's

Thank you for watching 🙏😊 Making Pellets Generally Uses Flour, Some From Wheat, and in My Country Pellets Use Tapioca Flour. The Purpose of Adding Flour Is To Combine Other Ingredients Such As Fish Meal, etc. After It Is Mixed, It Is Molded Into Pellets. That’s the Only Process and There Are No Other Ingredients Besides That. Each Pellet Maker Has a Different Dosage Composition. And There Is a Possibility That the Composition of the Flour Mixture Was Too Much When It Was Made at the Factory. There Is a Method That I Generally Often Use if the Pellets Are Too Hard, As Follows: I Steam the Pellets (Not Boil Them in Water) First for Approximately 5 or 10 Minutes and Usually the Water Vapor Resulting From Steaming Can Make the Pellets Soft. And the Next Step Is To Dry It in the Sun in a Shady Place, After It Dries a Bit, I Soak It in Raw Eggs Which I Have Mixed With Sweetened Condensed Milk and Vanilla Aroma. Hope It Helps, and Thank you for your comment 👍🙏😊

Thank you very much

@@burimcanolli5421 If Soaked It Will Become Mush, your welcome, Pleasure To Help You thank's 🙏😊

​@@TheFishingStyle_FishingChannelThank you so much, you are the only person who has helped me you are only person from millions of other videos.

@@burimcanolli5421 Your Welcome, Please Try To Search on KZbin, That’s Many of People Share How To Make a Dough Bait? You Will Be Skilled at Mixing Homemade Bait and Studying the Behavior of the Type of Fish or Target Fish You Want To Catch. What I Have Provided Is Just My Experience, I’m Glad I Could Help and Thank You. 🙏😊

Thank you for watching 🙏, Dear To All My Channel Viewers, Please Be Willing Don’t Forget To Subscribe, Like, Comment, and Share on Our Channel, and We Really Appreciate It. Thank You 🙏😊

Thank you for watching, GOD Bless You 🙏

Thank you for watching 🙏 No, don't worry ...first because the dough bait is put together (one circle, not 3 circles) and there are three hooks in it 😊and second if you want to put dough bait on 1 hook each try make a line to hook short, I always make only 1,5 inch long line for each hook ( don't make it longer than that ). And thirdly, if you use a fishing feeder, hide the two hooks (left and right) on the bait in the feeder, leaving the middle one hanging. Hope this help you, thank's.

Thank you for watching, Hopefully it will be useful someday 🙏😊

Thank you for watching 🙏 😊

Thank you for watching 🙏😊

Thank you for watching 🙏😊 With All Humility, Hopefully This Is Useful, Thank You 🙏

Thank you for watching 🙏 You're welcome 😊

Thank you for watching 🙏😊 try searching on google search and type : how to use a monkey climber fishing ? Hope it's useful 🙏.

@@TheFishingStyle_FishingChannel So why did you not show in vid how it was to work been a lot better

@@willklinger2558 Thank you for your comments 🙏😊 the time will not be enough and the viewing duration of this video will be long In principle, this tool functions the same as other fishing bite alarms ( I mean especially the conventional ones ), only I prefer to use the old method, especially when I'm fishing where the wind is blowing very fast. And this tool is very helpful for detecting fish bites. Thank you 👍

Thank you for watching 🙏 😊, used iron plate, In the triangle, the base side is 5 cm long and both left and right sides are 4 cm long.

Thank you for watching 🙏😊 yes, I know, in this video I only use air conditioner pipe measuring 18 mm or 3/4 inch in diameter to make the circle.

사각파이프 100mm×4 두게3mm

🕳4mm🕳2mm 🔩

@@user-sj6wd8xf8q i use round pipe thickness 1 mm

@@user-sj6wd8xf8q I use round pipe diameter 3/4 inch and thickness 1 mm

Thank you for watching 🙏😊 Fish generally eat bait by sucking, understand this first. So if you put styrofoam on the hook, it will create a better thrust effect than not giving it styrofoam. Don't be confused about this, the essence of this method is the same as a trap for fish.

Thank you for watching 🙏😊 yes

Thank you for watching 🙏😊 agree 👍

Thank you for watching 🙏😊

Thank you for watching 🙏😊

Thank you for watching 🙏😊

Thank you for watching 🙏😊

Thank you for watching, God Bless you 🙏😊

Thank you for watching 🙏😊 1. Always make sure a running sinker is installed after the snap cap and adjust the weight to the bobber used If the settings are correct the sinker will be parallel when cast. 2. You need more weight when fishing in large currents or change your fishing technique to bottom fishing.

🙏😊

Thank you for watching 🙏😊

Thank you for watching 🙏😊 pause my video at 2:42 you can make it too because it is very easy, I made it from a piece of stainless steel wire diameter about 2 or 3 mm, the most important thing is the gap between the two wires. The gap on my tool is 5 mm and it can produce a loop of approximately 1 cm in diameter. 👌Good luck 🙏😊

@@TheFishingStyle_FishingChannel Thank you very much, this will come in very handy for my Sabiki rigs for Opelu and Akule here in Hawaii...

@@Lavadx Your welcome 🙏🤙😊

Thank you for watching 🙏😊 Yes, that's right, follow what I have demonstrated in the video, For how many wrap, the guidelines are as follows the heavier the line you are using, the less the number of wraps the lighter the line, the more wraps you use. Make sure all ties are tight and not loose. All Knots Must Be Wetted Before Tightening, in Order To Avoid Overheating of the Fishing Line! Good luck hope this helps. The key to all ties is that we create a loop which in the end is useful for locking the ties that have been made. The point is to keep practicing "Practice Makes Perfect" Right? 🙏👌😊

Thank you for watching 🙏😊 soon I will show you 👌

Thank you for watching 🙏😊

Thank you for watching 🙏😊

Thank you for watching 🙏😊

Thank you for watching, 🙏 No, I am not kidding 😊 At first it looked messy and you had to be patient to fix it because there were so many twists ( in this video I use 6 wrap, it should be below that number generally 3 wrap ). That is ok, when it's tight everything will return to normal.

Thank you for watching. Maybe later, when the situation and circumstances allow 🙏😊

Thank you for watching, your welcome 🙏 😊

Thank you for watching 🙏😊

Thank you for watching 🙏😊 in this video I use 1.5 mm steel wire . And for molding upper loop I use 3 mm diameter steel bar.

@@TheFishingStyle_FishingChannel Thank you. I wonder who the ultra Wokes are with the Thumbs down? Democrats?

Thank you for watching 🙏... Yes, this tool is for placing bait at the bottom of a fishing spot and hoping to invite target fish to come to that spot ( adjust the size of this container to your needs ). If you throw it some distance, use a smaller container, in this video is just an example.

@@TheFishingStyle_FishingChannel Ok great, I thought that is what it might be for, great idea!. Thank you!

@@paulmanzone8373 your welcome 🙏😊

Thank you for watching 🙏😄

Thank you for watching, noted ! 👍😊

Thank you for watching

Watch my videos likes

Thank you for watching 👍😊 Please notice 🙏 : Don't look for galvanized ones, use non-galvanized materials so they can be destroyed quickly when exposed to salt water (don't use stainless steel materials).

@@TheFishingStyle_FishingChannel yes brother will definitely look for non galvanized ones. Thank you for the heads-up.

@@ananyaratnakaran391 your welcome 👍😊

Even bird mesh will do. Great idea, especially on rocky beaches. 👍👌

@@ramennaidoo162 Thank you for watching

Thank you for watching 🙏🙂

Thank you for watching 🙏 🙂

Thank you for watching and comments 🙏😊

Thank you for watching 🙏

9 minutes to wire wrap 2 hooks? When do you have time to fish?

@@gareths100 Thank you for watching, 🙏 I always make all the preparations the day before I go fishing or when the weather is not suitable for going fishing😊

Yes, it is and thank you for watching 🙏😊

This technique is the same as bottom fishing, the only difference is that the sinker is given an additional weak link ( I use ussualy only 8 lbs or 4 kg mono line ), so that it can break if it gets stuck on rocks. You can still save your fishing rigs and fish ( the sinker line will break, and you won't lose your entire trace or fish.). Until you starting again for fishing tying the new one of sinker and do the same technique as before. Sometime I use a stone as a weight, instead of a lead weight. I often lose about twenty stone weights during a session, just imagine the costs ( and pollution ) if I would use lead weights instead. Other people use spark plugs or old worn locknuts, but I prefer stones. When fishing rocky marks, I prefer to have company for safety reasons ( especially fishing at night ). Always think safety ! OK

Thank you for watching 🙏