Brasil 🇧🇷

my Level 5 stopped working.. After watching you video and confirming the fuse was good an then tapping on the relay, level 5 is WORKING. thanks. may have been loose or its going out. I'll pick up a new relay. Huge thanks

Can you show me where the turn signal relay is on a 2012 ford escape

Man, thank you

Extremely well spoken, you have a natural talent at being thorough and well understood, I tested both the low and high side valves for pressure by pushing on the valve with a pin, and literally no pressure on both on them (Engine was off), do you think it's just out of freon or possibly a leak somewhere in the system?

Hi, I have a 2008 Focus and the lighting to the clock display goes out often and the lights to the gear shift are out. Have you experienced this and if so do you have any videos to share on replacement?

Ty wonderful job

Awesome pal. To the point and informative. Thank you sir

Genuinely hope you make a million dollars off this video and can retire and have a really fricking awesome life forever cause you just saved me (and probably thousands of other tundra owners) a massive headache. Thanks dude, you’re massive

thanks for the info

Thanks for the tip 👍👍👍

Awesome video!

Excellent video. Still Troubleshooting my fans. Both aren't working. All fuses and relays work. About to hardwire the fans to a cordless tool battery. Just wanted to share that this is another important test. I also like the tapping idea. Thanks!

Got a 2018 an the air works some times but most of the time it doesn't when the gage works in the car the air works but when it doesn't work it don't work. I know literally nothing about cars an stuff I build house so it's not my kind of work. Some help would be greatly appreciated

Excellent video.. thanks

Any link for 2018 accord relay?

I don't know if you'll see this at this point but would it cause an issue to just remove these two fuses to disable some emf?

How do you reset the radio, which is ‘’LOCKED’’ just replaced ecm, now LOCKED is on radio screen,. Thank you have no money for dealer ship service, and could use some help,, thank you

I’m a 68 year old lady dealing with mechanics where I may as well Vaseline myself for extra protection. I own a 2016 Hyundai Elantra still under 10 year warranty,i know my car needs engine/transmission mounts, has been recalled for ANTI THEFT UPDATE and was due for maintenance BEING at 33,000 miles. I took it to a mechanic to get an PRE-estimate before I took it to the dealer. This particular mechanic gave me an outrageous estimate OF 3k stating I needed brakes, rotors, belts & mounts. It was a different story when I took it up the dealer. After waiting 8 1/2 hours at the dealer the only thing they did was the “anti theft update” and came back with a different story. Yes I do need mounts ( I already know that) They said I need spark plugs every 5k, tire rotation and that’s it, I asked them about the brakes they said they were fine, Next day less than 24 hours later I noticed my brake lights stayed on once I turned car off. I unplugged the lights in order to do some reading/ searching and not kill my battery . Videos Point to the brake switch and one video said if you see broken plastic pieces on floor under brake foot likely it’s a broken connector piece. Then I found your video. BEST VIDEO ON THE ISSUE IM HAVING. Your vid pointed exactly to the piece that I found on my floor mat. Here’s my question. Since I have an appointment at the car dealer in a couples days 5/29/24 how do I convince them it’s not a huge issue and just the small broken piece? Additionally since the Anti theft update my abs warning light pops up when I go to park but turns off once I restart the car. I’ve heard horror stories about this update how it screws your car. Any how now you know my whole life history when really what I wanted to do was THANK YOU VERY MUCH FIR THR EXPERT VIDEO AND ADVICE. I Widh you lived in Miami🌞

Best video explaining about the a/c problem.thank you

Very good video tho !

When trying the relay cooling fan 1 it does turn both of them but when I try cooling fan 3 relay it won’t spin anyone know what it may be? I’m guessing the the passenger fan motor might not be that good since it does spin at low but it won’t spin at high idk , …

I have issues with my 2008 Ford explorer 4.6l V8 I had recently replaced the pedal it runs for awhile then it no power, can you give me any advice

Are these fuses in slots labeled "DCM"?

Excellent video

2019 Honda Accord starter relay

I have a question I wanted to know where do you connect the the low profile fuse for the interior lights

Great video. Thank you

Excellent video! Many thanks.

Thank you for taking the time to shine some light as to where to start and continue.

Thank you for this informative video I just swapped the relays like you mentioned after hours of trouble shooting and it started also I found a missing nut on the post under the red flip up cover so that it had bad connection to the alternator all are simple fixes that could have cost a lot at a dealership when towed there but I was able to get it going from the help here . the relay must have not been working then when I changed it to the spot for the blower fan it started to blow again. Problem solved I'm thankful for videos like this. Thanks

Mine won’t turn off when i turn it off

Thank for the help

God im glad i found this video 😭thanks man!!!

Did the bracket come with bolts or something to fasten the top part of the bracket?

Hello, could you help me locate the Relay and the fuse for the fog lights. Thanks friend.

What about the fuse for clock display

This is the only video I could find on KZbin related to my issue. Thank you so much for posting this.

Thank you.. very well explained

dude, great presentation. just a little advice on jumping the pump. pin 85 is ground and 86 is positive. if you jump those pins, it will spark and hopefully blow a fuse. you want to send the power from 30 to 87 with a wire, that will turn the pump on.

So the camshaft sensor for the passenger side will be the same size socket. passenger side of the engine with the same process to remove and replace the sensor correct.? I’m getting code 0340 cam bank 1

Fantastic, 20 amp was burnt to a crisp lmao thank u sir

Yes very helpful straight and to the point ,thank you

What about the big black that seem to be raley...

Does the high beam fuse have a number or letter on it?

Fixed my horn in less than 2 minutes because of your video. The horn relay was missing… thanks!

Where is the fuel pump relay?

Tremendously great video! I did have to replace the grommet. My grommet was actually plastic and I saw what looked like Chiclets on the floor. I replaced that and that solved the brake light problem. Can you tell me why when that solenoid or that switch is activated there is a clicking noise in the center console that is quite loud? I am having trouble with my cruise control and one video said that it's related to this particular switch. The light on the cruise control button is on but the light on the dashboard never comes on and cruise control does not work. What in the world could be wrong?

Thanks! I usually deal with gas hot water heaters. Just got to a rental cabin and warm water doesn’t last for one person’s shower. I’m sure, being a rental they set it at low settings to save money. Well I’m paying plenty to deserve a hot shower. Good thing I’m handy 😉 Will set it back b4 leaving and no one will ever know 🤫 well except you guys 😆

What a dumb video. Honestly. It’s not secret. It’s the dash to access the fuse panel.