Do you have pinout diagram for that ecu sir?

How did this repair go? Did you have to replace MC33888 or other components? Thanks!

Totally unhelpful. How did you do this? Removed the chip? Left it in the board? What software did you use?

eeprom clone, is enough ? or need also mcu ?

I kz engine stopped while driving but it could run again for a short while then stopped and run again for sometime, run and stop often, so what happened, any advice?

Still no audio from roughly 1:06

Probably an issue with the processor and not the the cause of the solderless adapters..

what did you change?

What if the anti shudder valve was sticky or not opening fully?

T tech who suspect the ECU being defective sounds thick as shit. Clearly hasn't done some basic tests in t pneumatic turbo actuator/ turbo rod position sensor. Probably a 'home mechanic' who knows best from Google 🤣🤣

I have this issue, what should the pressures be before and after the def if it is clear ? Great video btw

2335 Samara Island

What if you don’t have the 5 volt reference

Really good job!

What tool and software did you use? Looking like Kess for a second till you showed the software

¡Hola! ¿Cómo reprogramar un BCM para eliminar los códigos U1000 y U3000? (Ford Ranger 2016, problema con los faros). Ford quiere que cambie el módulo, pero he visto que solo se puede reprogramar... nadie lo hace donde vivo. Pensé en aprender a hacerlo. Gracias de antemano.

Are u able to repair another?

Hiw much does one cost ready to install 2014 ford focus

Stop talking about Rikki.

I can't ship my 2012 Mazda 2 to Oz ...so what type of Mic should i be looking for ?

Hi did you manage to change it

what scan tool is that? IMMO ELITE?

We do these that often now on the small fleet we have we just remove the glow plug and use a pick to unblock them and give em a quick spray out once unblocked... only takes about 15 mins to sort.

Thank you, YOU are the MAN!!!!!

Is it worth puttting second hand ecu in holden commodore omega ve???

Does support heavy trucks

Is it the same if you reflash it using your original rom?

hi... thanks my friend and good continuity...i'm living in Haiti 🇭🇹 i really love this car...i have 1 Year 2001 V6 I just want to replace cover of a new cover...i just want to put my motor on the new cover. please tell me how much i can pay to have it

inspiring auto eletrician

a dedicated auto eletrician

We’re do you find board schematics of ecus?

what are the chemicals you sed on the dpf and are they available to buy to try this at home ? most shops here wont try the diagnostic process, just want the money for a new dpf

Nice repair 👍 saying that battery from the landfill💯💯

Hey mate so if I buy a new ecm and switch the flash chips from old to new, does that avoid the vin matching issues when adding a new ecu, I’m struggling with it currently, cheers (:

what would an ecu repair like this usually cost and what would the excepted turn around be

Hi! That’s nice, you know about this map works in alientech for a bt50 2022 3.0 (the same ecu)

Double locking ecu communion stop land cruiser b1249 toyota

Peace be upon you, my dear brother. I heard about you and your high and honest experience. I have a problem with my car, which I own, a Toyota Land Cruiser, 2017 model, V8. When I press the open button, the car is slow in receiving the open command, but when I close it receives the command quickly. The problem is in the opening. Note that you changed the remote battery, and when I checked the car on the computer, these faults appeared. Please advise.

The KZbin thumbnail did not do you any favors

Is it thee ccm that the brake pedal switch goes to to control a relay? IS a skoda fabia mk1 (2004) if that helps. Should be the ceentral electric but I can't find than anywhere in the parts catalogue so started to suspect they are one and the same.

What’s the software/hardware you’re using here fella? Thanks in advance

I'm also keen to find out what was the fix, Triton got a new engine, radiator, thermostat etc and is seeing high ECT temps (105-108c) and causing temp gauge to go above mid-way especially when the air conditioner switch is on 3-4.

When searching for “BCM Ranger”, I always see headlight issues. The problem I have is when putting the gear on reverse (manual transmission), the backing sensors and the reverse lights dont work. This happened after I removed the battery for a day. Could it also be a BCM issue? 2016 Ranger

I would love to learn how to clone, where should i start, what equipment i need and and any tutorials i could watch ?

Hey can you tell me where the eeprom chip is located?

Would you repair mine ? it's a for Discovery LR3 from 2005.

1

Love from india and iam car auto elartcian ecu repairs

heater fose???????????? a thought his name is PCV hose

I was hoping for a fix