Up-Country Electric

Пікірлер

@Electchickn 2 күн бұрын

Nice work! Now just do like at least one of these a week lol hella snazzy with the glasses

@austindahl6166 11 күн бұрын

Stainless steel? I’ve used hydraulic on stainless 3” and it was worthless..

@Up-CountryElectric 11 күн бұрын

Yup, stainless all day.

@reignbopanda3444 12 күн бұрын

Finish?

@brendantillmann9155 12 күн бұрын

do they make the edges turn out weird at all like maybe bend the edges up a little bit around the cut

@Up-CountryElectric 11 күн бұрын

Occasionally, but nothing that can't be removed quickly with a half round file.

@legomanTJ 15 күн бұрын

Electricans are allergic to hole saws

@yongfenghuang-ki6jo 18 күн бұрын

❤❤❤

@InLaymansTermsPlease 21 күн бұрын

Have you bent 4" 90s with the blanket?

@Up-CountryElectric 19 күн бұрын

No. It's just for doing offsets that aren't 11.5, 22, 45 or 90 degrees. For those we use factory made fittings.

@fast2valve559 22 күн бұрын

Just got a couple of these meters today. This gave me a little insight on how to use it for the plc's on our machines. Thanks

@Up-CountryElectric 19 күн бұрын

They're great, only thing they can't do is generate 0-10vdc. Which is something I'm finding I may need more in the future. 95% of our analog signals are 4-20.

@fast2valve559 19 күн бұрын

@@Up-CountryElectric Being I paid $5 total for two 789's in mint condition and an 83v at an estate sale that the lady didn't even know what they were. I can't complain. 😁

@herschschw1766 22 күн бұрын

Hatten wir schon vor 50 Jahren!!! Nichts neues!!!!

@Up-CountryElectric 19 күн бұрын

altes Werkzeug ist am besten!

@bobibobabanay Ай бұрын

Thank you for sharing this. parameter 99.16 also Switches the rotation direction of motor

@Shon-z7w 2 ай бұрын

Awesome video. What kind of plugs did you use? Thanks.

@Up-CountryElectric Ай бұрын

Greenlee conduit plugs, your supply house should be able to find them

@rogerancell1208 2 ай бұрын

Love it

@MrSoto92 2 ай бұрын

Nice! Under what Mohms is it safe to say that the motor is bad?

@Up-CountryElectric 2 ай бұрын

Industry standards vary but below 50k ohms and you're likely to have a shorted motor soon. Ideally we track the resistance over time from the initial install. That way we can possibly predict and prepare for the failure. If I see below 1megohm I think it's suspicious.

@aaronhorn6849 2 ай бұрын

The milwaukee one is much better.

@deeeyewhy5949 2 ай бұрын

Does this work with bearing presses like a traditional hydraulic knockout?

@bourbonstreetla 2 ай бұрын

Which is quicker for 2.5 inch bending (not in a trench), the blanket or the machine?

@Up-CountryElectric 2 ай бұрын

Our hot box only goes up to 2", so I'd have to use the blanket

@bourbonstreetla 2 ай бұрын

@@Up-CountryElectric Thanks for the answer. If you had to bend a dozen or more pieces of 2 inch in to a 90 degree bend would it go faster and easier with the box or the blanket? I am trying to decide to buy a box or blanket for doing a lot of repeat bends at the shop to send out to the job.

@Up-CountryElectric 2 ай бұрын

@@bourbonstreetla why can't you use factory made 90 fittings from a supplier? You'll have a hard time making 90s with pipe over 1.5" with heat as it will collapse. We use heat for minor offsets up up to 60 deg tops.

@bourbonstreetla 2 ай бұрын

@@Up-CountryElectric They are on backorder here and expected to be for a while due to the hurricanes. I have enough to last another two weeks but then I will be in a bind.

@Up-CountryElectric 2 ай бұрын

Dang, well in a pinch like that I'd plug the ends to help them not collapse. I heard about old timers who would actually put a few psi into the pipe while heating and bending using some kind of rig. I think that's how the factory does it, but I'm not sure haven't seen it. Good luck! Figuring stuff out and making it work in any situation is the Hallmark of our trade 😅

@AmAZIng-WOw12 3 ай бұрын

I got to see this in use a few days ago

@WolfgangS 3 ай бұрын

We produce the electronic for such a tool by Bosch :*)

@boeing757pilot 3 ай бұрын

Great job! Do you folks use primer on the pipe before gluing? Or do you use only glue? Looks like just glue.. Thank you!

@TM-tz9rr 3 ай бұрын

Do you have a cold or something man? Sounds stuffed up beyond hell.

@theone-ou3gd 3 ай бұрын

Nice until look at price tag

@empire0 3 ай бұрын

I have the manual Greenlee knockout set and its amazing. Just gotta keep it clean and oiled and it rips holes like nothin

@bigjd2k 3 ай бұрын

Q-max punch on steroids!

@_fay_2516 3 ай бұрын

Это что с выбрацией работает?

@Jon-T 3 ай бұрын

Bro is showing off the tool yet doesn't properly use it SMH. If you want accurate holes you need to lay out a cross through the center of the hole (larger than the knockout die). The flat die needs to be on your lay-out side. It has little notches/marks that will line up with a cross through your center hole. Align at least 3 marks and your knockouts will be bang on every time. Using the "eyeball" method shown gets you kinda close, but any tradesman worth their salt will see the hack job from a mile away.

@tylerlake9712 3 ай бұрын

What in the world are you putting in those holes. PVC?

@Up-CountryElectric 3 ай бұрын

4" Stainless steel hubs

@DeePalms 3 ай бұрын

Okay...lol

@BobFromTexas 3 ай бұрын

I just bought a ratcheting KO cutter set after using one that requires a damn wrench for years and now I’m seeing this oh my god

@yaroslavkuznyetsov2932 3 ай бұрын

Harbor freight got hydraulic one for 100$ same shit

@agentsmith28052 3 ай бұрын

I needs this 🫠

@tjpprojects7192 3 ай бұрын

Knocks up to 4 inch holes? I woupdn't let that thing knock up my holes.

@DeathIncarnate306 3 ай бұрын

Not really any faster than my hand hydraulic Greenlee knock out.

@BernardBouchard-qq9kq 3 ай бұрын

I remember calling them Blair hole cutter's.

@Photoshop.Expertise 3 ай бұрын

you didn't show any troubleshooting tutorial I can tell people in this video that I was your coworker and I fixed it and you just went to record this video saying you fixed but how you fixed if your a carpenter.....