Oem sir

Hi, we no longer carry this item

Hi, u can visit our website aquaneo2u.com to have a look

Sorry only English

You can use tweezer or screw driver to remove

Feed them algae waffer.

The kelp algae wafers are a really good option.

We're feeding hikari algae wafers

Try delete and reinstall again

Yes they are!😄

Yes it is 👍

30cm should be ok, better get the D or D pro series. The stand is easier to adjust, D and D pro series also allow you to adjust the height of the light

30cm should be ok, better get the D or D pro series. The stand is easier to adjust, D and D pro series also allow you to adjust the height of the light

@TheVoyagers. I also have a 36cm nano, did you end up going with the 300? Or 400? How do you like the model you chose?

Hi, we're from Malaysia

Hello, yes can ship to Indonesia. You can email: [email protected]. Thank you!

Thanks ✌

Currently only B2.0 mode has this function

@@aquaneo2u Thanks for the reply. That’s great then so the app does have sunset modes for fresh water. It would be nice to see a graph of the light channel time adjustments for sunset day light & moon light which is easier than a light time chart alone Ledstar & Chihiros do a graph check their apps... Just another note, I found out the best production for Chlorophyll is in the wave lengths 430nm & 660nm the spectral graph for the t90 pro shows no spikes in those regions! Is that a problem as I am considering buying this for my 45CM x 45CM square tank:-).. thanks 🙏🏽 again..

Yes!

Most probably you select the wrong voltage when you first pair the light, or you picked the wrong 'Mode'. Based on our experience, you can only use B1 mode if your light is International version. B2 mode is currently for China version only

Hikari sinking wafers

Yes, sure

@@aquaneo2u thanks for your help 😊 I actually bought the light several months ago, and I’m very happy with it. It works great with the tank I asked you about earlier.

Hello, where are u located? We do carry the light shades

Hi, yes the uv light is working

Hi, sunrise/sunset option is not available at the moment. Not sure if week Aqua will be adding this function in the future.

Yes, it definitely does. However please bare in mind that the app control model actually comes in two different versions. The older ones have more basic options but the newer ones have more advanced options. The reason is because the manufacturer upgraded the App module, it’s a physical chip inside the light.

Hi, u can visit our shop to have a look

Hello, height of the mounting bracket is about 35cm

@@aquaneo2u thanks a lot

@@63MRFLAG You’re welcome🤝

🤩🤝

🤝

Do u mean ripple effect? Yes it does, but it also depends on the water flow in the aquarium

Both are good quality co2 regulator

Not recommended to overdose ya. Kindly follow the instruction stated on the product

No, it all depends on the air pump, not this air diffuser. Furthermore, you may adjust the airflow if u think the air is too strong

i hope the tank isnt 2 feet

out of stock at the moment. sorry

Thank you so much!

Yes, sure. On 6-8 hours a day will do

Yes, will help to lower water ph

This product is for Malaysia market only, sorry about that

Pro Z Series brighter than T series

which light best for both ?

ok noted tq

for 60cm type

N HatGuy wondering Bouton the same as I wanna use it for my vivarium

According to this forum, UP also makes hose adapters that lets this filter use hoses bbs.tropica.cn/forum.php?mod=viewthread&tid=1128651&archive=2&extra=page%3D1&page=2 item.taobao.com/item.htm?spm=a230r.1.14.16.5425113ekhO5DV&id=572492053919&ns=1&abbucket=18#detail

Holy cow! But this guy diyed it from non dedicated adapters. shuicao.cc/forum.php?mod=viewthread&action=printable&tid=753949 本人用的是30*30*30小方缸，由于当时位置有限，所以选用了雅柏EX-120带动力挂滤，这挂滤确实很适合小缸使用，做工不错，而且很安静很安静（使用一个月情况），出水流量可调很适中，内置4层过滤盒能随心地更换滤材（由于我想水硬点，所以把里面的石英环换了珊湖石），出水力量足够，能很好地把CO2打散至缸的每个角落。后来我感觉挂滤无论从视觉、使用还是维护上还是有不满意的地方，而且正如很多前辈说的：生命在于折腾，就想把进出水方式改造成软管连接玻璃进出水口，搜索了网上相关改造帖了，资料还是有，但太少，于是认真参考着就动手改造起来了，后来成功地把挂滤改造成桶滤，事实证明1.2米高程，雅柏EX-120表现地毫无压力，个中要考虑到本来进水口洪吸原理就有一定压力给120，所以动力方面不会造成影响。（请问能申精吗？） 材料： 银声12/16阀门2个（5元/个） 雅柏U型连接管1个（12元/个） （有条件的可以直接买个雅柏340阀门，但卖家必须一对卖，规格包含分别为12/16和16/22各一个，但我们只需要12/16这规格，而16/22对于120来说是没有任何作用的，所以要买2对，才能有2个12/16，单价25元/对） 3分软管2米（8元/米） AB胶一组（5元） 玻璃进出水套装（75元） 操作： 1、把银声12/16阀门随便一则的红色塑料套环取下，把超出锣纹部分介掉不要，介口用挫刀细心磨平磨滑，用水冲干净粉屑晾干备用； 2、把雅柏U型连接管在弯位处介开两份，取得两个接连头，用挫刀细心磨平磨滑，用水冲干净粉屑晾干备用； 3、把AB胶按1：1比例混合好，然后涂在从银声12/16阀门介掉那边的锣纹上，要涂满一圈，要饱满，然后套进在雅柏U型连接管取得的接连头中，轻轻旋转半圈再摇一下，确保两件物品之间的空隙尽可能被AB胶填满，多余的AB胶会延着接口漏出来，那个不需要理会了，不然越搽越糟糕； 4、根据AB胶使用说明，30分钟达到60%强度，24小时达到最大强度，不心急的话就等24小时吧，反正我是等了24小时的，今天工作就算完成了； 5、剩下的加水、套连接软管、接玻璃进出水口之类的工作就不介绍了。

my room temp is around 31c and so is my tank. can it go done to 27?

30cm by 30 cm

okay, thanks for your help!!