That new Holland looks a great bit of kit, I was going to PX my John Deere 2520 against a workmaster 35 but the dealer messed me around and then told me it was sold so I couldn't have it then that sale fell through and they rang asking if I still wanted it which I did but my boss now won't part with the cash because of the way I got treat. Which I totally get where he's coming from they were terrible but I bet this new Holland would be way better than our Deere
@JohnFrytag17 күн бұрын
@@matthopper7411 Hi Matt: a real comparison would be great to watch!
@Jake-tp6on18 күн бұрын
Dude n red sabotage the whole time dam cock sucker😂😂😂😂😂😂
@rickorourke2528 күн бұрын
Do yourself a favor and skip the first 5 minutes
@JohnFrytag26 күн бұрын
@@rickorourke25 the 5 min that broke it
@chrisgreba2258Ай бұрын
What a sh!t video
@kevincronin1370Ай бұрын
I have a case 1150 that steering levers won't stay in neutral, they just kind of move where they want if you don't hold on to them. Do you know that cause of that?
@robertilberg2 ай бұрын
Nice piece of machinery. I am working on the same model and we don't have the linkage for the compression release or glow plug harness is there any way you could help with a video or pictures of those two things?
@mardyfisher6932 ай бұрын
Studebaker called it "hill holder" I thought. My 53 has it. I got a rebuild kit for it. Truck isn't finished so I can't report how it works.
@mardyfisher6932 ай бұрын
That is the Budd logo that is stamped on my 53 wheels. Interesting. It's not on my doors. Possibly WW2 ? Weird things happened during war production years.
@ianc4352 ай бұрын
Shouldn’t the flashing go below the concrete line? Drip edge under neath
@jerrystauffer23512 ай бұрын
I'm all for DIY, but this is madness. It's too detailed to be satire but rebuilding an injection pump on a bench covered in body filler dust? Should only be worked on in a clean room. You can't even touch the internals with your fingers.
@MitchellRitchie-s5d2 ай бұрын
i’m working on my 1150 and i cannot find the serial number on the trans anywhere. do you by chance know where to find it??
@JohnFrytag2 ай бұрын
@@MitchellRitchie-s5d memory serves?? Back trans plate? Thanks for watching
@vikingnorm69352 ай бұрын
I live in PA, I tore off a concrete & block porch that was put on in 1983 or 82, it’s a little worse than on here for the 20 foot span of the porch then the rest of the house is like the day it was built, glad I watched this, my house isn’t a modular & was built in the 50’s but it’s almost identical, thanks, this is a lot safer than what I had planned
@master_vator3 ай бұрын
Mine looks justvlike this, from a deck that was put on 30 years ago roughly, I'm replacing the deck next year. This looks like a very doable job. Thanks boys. Not looking forward to this but, gotta be done
@JohnFrytag2 ай бұрын
@@master_vator 👍
@Aelanna3 ай бұрын
That's exactly what happened to my double wide mobile home. Some guy built our deck 23 years ago before we lived here and did no flashing at all, just nailed the ledger to the wall and now we have similar rot in the wall, with holes to the inside, mice and yellowjackets making homes in it, etc. I have to demolish the existing deck and redo everything from scratch. What a pain.
@JohnFrytag3 ай бұрын
@@Aelanna sorry to hear that. It is very common
@stepheneldredge62632 ай бұрын
Doing this as we speak
@technicalitems7313 ай бұрын
Whew! Is case a better design than competitors of the same year? Ouch. I have been parting out an 850 loader
@JohnFrytag3 ай бұрын
@@technicalitems731 I don’t think you can beat an old Cat
@blackcatlover12423 ай бұрын
Body job is a mix of mechanical and art work....
@georgecass85293 ай бұрын
Get a Flail mower and get rid of the belly mower or get a finishing mower . Bellymowers are really useless on that size of tractor
@eroom20873 ай бұрын
What about the engine, who makes it , does this engine have a reliable work history
@barenekid96954 ай бұрын
Reall !!??? Spend your Beer Tokens.. and have a machine shop Grind that crank
@gooberuploadsinc4 ай бұрын
AUTO ARC????!!!! STARBASE REFERENCE???!!!! good video im not into this but i like it
@DIRTCONVERT5 ай бұрын
Next time use soapy water as a lubricant. You don't want smoke and you don't want to breathe the smoke!! It is a cancer risk.
@timothyjohnson72355 ай бұрын
Do you still have this machine? Would like to see a video if you fixed the brakes.
@mblake04205 ай бұрын
Hows it doing?
@davejanowski45105 ай бұрын
Ok best of luck to you see you eventually😊
@johnbull25925 ай бұрын
Hi John , I have the same machine as you but i am unsure what engine is in it ! Model of engine is A 401D . Any help would be appreciated
@linkscape19575 ай бұрын
So are all the studs the same length or did you gradually increase them ?
@alspeers69316 ай бұрын
Nice video, straight forward and clear,not to be picky but that newer motor was, i believe, a 336 cubic inch Case motor,any way thanks,and good luck bro.
@melodiefaulkner21296 ай бұрын
You are a waste of time thanks for wasting mine title your videos correctly you are worse than the ads
@charlie_sin_mag6 ай бұрын
Is the oil filter worth it?
@JohnFrytag6 ай бұрын
Hi Charlie; Yeah I think it is. The valve and short stub on the drain is good too. It really helps when you can drain and clean up the bottom of the parts washer. also you can strain he fluid before you put it back in. sooner or later if you use it enough the fluid will be shot but its kinda $$$ so might as well get as much as ya can out of it. Thanks for the comment!! John
@davejanowski45106 ай бұрын
John where the heck r u
@JohnFrytag6 ай бұрын
Hi Dave; You know I am always putting something on the "back burner". Probably due to a low attention span or just too many interests. Anyway I have been busy building and starting a brewery to complement my families BBQ resturant and cater service. I guess I haven't been filming simply because I have been too busy with it and I didn't really want to reveal it until the time is right. Thanks a million for reaching out and keeping in touch. I will be doing more videos eventually when the mood strikes me. In the meantime I hope all is well with you and your family. Connor and his wife are expecting a new baby girl any day now and I'm tremendously excited to meet her. Thanks again!!!! John
@BioHazardCL46 ай бұрын
I found this video looking for coal (not wood, not charcoal) fired stoves
@JohnFrytag6 ай бұрын
Hey Hazard; Well once in a while KZbin screws up and allows someone to find one of my videos. Hope you did enjoy it and thanks for the comment !! John
@WesWhaley-tw5ms6 ай бұрын
Ĵ
@Erik7prc6 ай бұрын
"Ill just put some glazing putty in there" *pause* "What, clean that up a little bit!" 🤠
@JohnFrytag6 ай бұрын
Thanks for watching 👍.
@landynmeacham7 ай бұрын
we actually need something to clean our barn with but it has been hard to find something short enough to go inside and I think I want to find one of these to clean our barn and do other stuff around the ranch.
@JohnFrytag7 ай бұрын
I think you would want the ag tires. I got this one with the R-4 industrial tires as a compromise between traction and tearing up the lawn while mowing. Best of luck in your decision and thanks for watching. John
@1997cr80r8 ай бұрын
So I just stumbled upon your channel because I have a 830 COM aswell and the engine is tired and I just happened to find a 870 engine for sale and I figured it would fit and looks like it does. What was your biggest dilemma installing the bd336 in the 830? Did the bellhousing bolt right up along with the COM 830 flywheel? I seen with some cutting and grinding the bolster bolted up. Please let me know
@JohnFrytag8 ай бұрын
Hi 1997; Yeah it bolted right up. COM and all. you will have to notch the engine to bell flange for the steering rod and the belts are tough but we got it figured out in one of the vids. And like you said a little grinding on the bolster. Not to bad a job really. If the injection pump wasn't stuck we would have it running by now. Thanks for watching!! John
@1997cr80r8 ай бұрын
@@JohnFrytag I've had good luck pumping seafoam though injection pumps that are stuck and letting them sit that way typically right on the tractor. I take the last filter off dump it out fill it with 100% seafoam and crack the engine or pump priming pump let the seafoam get to the plungers and barrels and soak for a good few minutes then they usually come right back around. I'm not sure if I'll jump on that 336 or not I'm currently restoring my case 500
@JohnFrytag8 ай бұрын
Thanks for the tip! Just checked out your channel. Had to see the 500 you mentioned. What a cool old brut!
@1997cr80r8 ай бұрын
@@JohnFrytag most my videos are from when I was like 12 years old I'm 26 now but that 500 video isn't too old I went though the engine on that in 2019
@wadebarnett25428 ай бұрын
Was there any sort of sealing material placed between the concrete and the treated wood? I'm just wondering about water running in. Or, was that area covered with matching siding?
@JohnFrytag8 ай бұрын
Hi Wade; There was no way to put sill seal or any type to tar paper or plastic because of the tight clearance. it would just ball up. So the sill plate is treated lumber and the siding covers it. Thanks for watching!!!! John
@davejanowski45108 ай бұрын
That is the stuff nightmares are made from John great job😊
@JohnFrytag8 ай бұрын
Hi Dave; you're right!! Took me way longer than I thought it would. Outa practice And I have to organize my tools...Thanks as always Dave!!!! John
@thaddeustroyer8 ай бұрын
Come with me, and you'll seeeee, a whole world of OSHA violations....😂😂😂 Glad.you got it out, looked pretty sketchy for a sec, but hey, ya doo's whatcha gotta doo's sometimes. Now, SHOW ME THE MONEEEEEEEYYYYYY!!!!😂😂😂 Happy Monday Mr. Frytag
@JohnFrytag8 ай бұрын
Hi Thad; Oh yeah! Thats why I must remain in my secret underground lair.....One of those boys would fill his month on me! Thanks a million for the comment ( made me laugh)! Hope you have a very happy day too!!! John
@patton96968 ай бұрын
Use waistband of your underwear and soak the paper in brake fluid
@JohnFrytag8 ай бұрын
Hi Patton; one question...Should I take the underwear off first? Thanks for commenting and watching!! John
@billysantiesteban41995 ай бұрын
Underwear on or off😂brilliant
@davejanowski45108 ай бұрын
Looking forward to the finished product just like you guys 😊
@JohnFrytag8 ай бұрын
Hi Dave; Yep can't wait either! But there is still plenty to do. Thanks as always!! John
@davejanowski45108 ай бұрын
Looking great guys you do excellent work😊
@JohnFrytag8 ай бұрын
Hi Dave; Thanks a million. Sometimes its hard to tell when you're standing right next to it. I really appreciate all your comments. Thanks as always!!! John
@kristinemclaughlin47188 ай бұрын
Hi John, enjoyed your video even though it was sad. But you are right, that's life. They sure are cute! Happy to see the second nest. 🐣
@JohnFrytag8 ай бұрын
Hi Kris; So glad you liked it !! Thanks for commenting and watching it!! John
@christopherhoenig51558 ай бұрын
For aspiring beginners like be, do u think u could do like a 101 series of episodes where you go over things trade school might not teach you? Or for people who didn’t have dads to teach them the trade
@JohnFrytag8 ай бұрын
Hi Christopher; Well sometimes the "algorithm" gets it right. I'm flattered you want a series and I do try to explain things the best I can. I don't think I rise to the level of expertises required to do an actual course. As far as advice; Keep learning no matter what you do!! I just had to research those fittings and it was all available with some quick searches. Now I wouldn't rely on just the internet tho. If you can find a hands on contractor that needs a helper that would probably be your best bet. Especially if its a guy who is thinking of retiring in a few years and then you take over the bizz. You will be his "parachute". Most everyone I know can't find a younger guy who can actually work. So if you have ambition and some work ethics the world is yours. No matter what you do be the guy who will do it the best and always give em more than they expect. Your phone will never stop ringing more business! Thanks for the great comment and thanks for watching!!! Keep in touch. John
@christopherhoenig51558 ай бұрын
The algorithm sure did drop me here. Proud to have joined an underdog channel with true quality. Im fixin to find a trade school or a company that will pay to send me to school for plumbing. Any suggestions for me in Texas? I wanna get into the maintenance/ repair side of things. I wanna fix botched jobs, I don’t wanna build brand new.
@rogercansler37098 ай бұрын
Watched your video and relived my own past. Lost my grandfather, his 3 brothers and my father to prostate cancer. My Doctor has been screening me since I turned 40. Finally it happened PSA hit 7 and was going up. Had a transperineal biopsy, 12 cores taken, test came back negative. On my 1 yr follow up,my PSA was now significally higher. Dr said there was a 70 percent chance that I didn't have cancer but a 30 percent chance i did. Considering my age (70s) Dr said we could just monitor, I said no, I couldn't accept a 30% risk. He scheduled me for a trans-rectal biopsy this time taking 30 cores from different areas. Again negative test results, but the chance of error was now down to 9 percent. I can live with those odds. God has been my anchor through out the whole ordeal, I understand the peace you speek of. Guys, it is my understanding, that if we live long enough we have an 85 percent chance of developing prostate cancer, and while it commonly is slow to progress and spread, when it metastasizes into the bones like in my family the end game is grim. Don't wait, See your health care provider, get tested and take care of yourself.
@JohnFrytag8 ай бұрын
Hi Roger; I think with the progress in medicine since my Father passed in 1982 the outcomes are much much better. Again as long as you keep up on it. All the medical advancement in the world doesn't do any good if you don't know you have a problem. Thank you for sharing! God Bless!! John
@WhaleBluePRS8 ай бұрын
And we know that all things work together for good to them that love God, to them who are the called according to his purpose. Romans 8:28
@JohnFrytag8 ай бұрын
Hi whaleBlue, Yep!! Anything that gets me closer to God is a great thing! Thanks for the comment!! John
@deanbarr57408 ай бұрын
PTL John. We have an Awesome God. ❤
@JohnFrytag8 ай бұрын
Amen Brother!
@joeledonne4238 ай бұрын
Good video. I went through the biopsy. That is painful.
@JohnFrytag8 ай бұрын
Hi Joe; Thanks!! Wasn't really sure if I was going to post it but if it get one guy to get checked its good! Yes that biopsy was tough. About the most I could stand without anesthesia. Thanks again! John
@fricknjeep8 ай бұрын
hi there your learning the same way i did ,just remember what you cut is off both sides . or double , well done
@JohnFrytag8 ай бұрын
Hi John; Seems the "hard way" is the only way I learn things. LOL! I've been watching you for a while now. Flattered you dropped by!! Thanks for watching and commenting!! John
@deanbarr57408 ай бұрын
I learned a lot today John, thanks. I'm in a long process of building a cabin I started way back in 2018. I got it all dried in, need to finish the interior and plumbing, now that I am Retired I can get back to it. Great video my friend.
@JohnFrytag8 ай бұрын
Hi Dean; That makes my day! Best of everything working on your cabin. I have a feeling you will stay busy enough to wonder how you ever had time to work in the first place. Congratulations on your retirement and Thanks a Million!!!! John. p.s. If I were plumbing from scratch I would do home runs in Pex.