Sound would have been cool. Completely destroyed my fob. It did not come apart on the side like this video. Just shattered when I tried.
@MazinJabarin4 күн бұрын
Sorry to hear that, I know it is very frustrating, I still believe it is not designed to be taken apart. If you still have the broken parts, try to glue it.
@j0j0kay4 күн бұрын
@@MazinJabarin oh I don't blame you at all! I was just letting the world know how bad these fobs suck haha. It's built just like the car... Plastic and glue. I've got a new shell coming tomorrow!
@GurpreetSingh-ky2no7 күн бұрын
thanks
@Turdburgler9 күн бұрын
Thanks
@melenciopabalate118717 күн бұрын
Question: can you replace just the one defective switch instead of the whole panel?
@MazinJabarin17 күн бұрын
Not sure if you can find a replacement for that, Probably those switches soldered to the board. I still have the old one, I will take it apart and let you know. come back to this comment later to find out.
@melenciopabalate118715 күн бұрын
Thanks
@williamrasengan25 күн бұрын
The real solution is to replace the internal HDD for an SSD. 🤷♂️
@MazinJabarin25 күн бұрын
As of today in 2024 probably yes, but 10 years back ... Do you remember how expensive the SSD was 😂
@ahmet-60421 күн бұрын
No, unfortunately, Apple has deliberately slowed down the data transfer speed. Even using an SSD is not a solution. With the new generation of SSD nas devices, it is now possible to see very high transfer speeds on your entire network. However, I have no idea if we can get a one-to-one working logic like time capsule. It can be used as a time machine, this is nice according to my interview... I will investigate SSD NAS devices for this job.
@abdalraheemelghamati480Ай бұрын
السلام عليكم I got code 23 ?????
@MazinJabarin29 күн бұрын
I am sorry, I don't know
@marcobatista7562Ай бұрын
I have a Sorento 2019 which MODE button has a man figure and reset process worked Ok and fixed my AC issue. Thanks a lot!!
@rachelcharrisАй бұрын
I'm watching this video now and it was really hard to find one on the same topic so thank you for doing it but not sure if you've done any others like it but it's really infuriating having you just out of shot all the time. I can deal with the silent stuff but just when I think it's getting interesting you disappear out of view 😂
@MazinJabarinАй бұрын
it was experiment and I am not doing it again 😂, I had to remove the sound (sorry for that).
@hanzhanaАй бұрын
Thank you so much friend
@aben365Ай бұрын
Hi. Just a quick question. I am planning to buy a Lancer EX GT-A and I noticed that the square black part just above the letter 'P' on the gear shift is missing. Is it a major issue ? Or is it something that can be replaced easily ?
@MazinJabarinАй бұрын
It is just a cover to protect an emergency method to unlock the shifter from P position (such as complete dead battery or no key to move the car on a recovery truck ... etc. you remove that cover and insert a screwdriver or pen to press a button, while you press on that button you move the shifter from P to N or any other position, and finally release the button), I don't know if is it easy to find a replacement, check in your local dealer or a scrap yard. Good Luck and double check if the previous owner was conservative on changing the CVT fluid or not, that is what you must focus on. CVT Fluid must be changed every 40 to 50 thousand KM.
@aben365Ай бұрын
@@MazinJabarin Thank you so much for the info. Ride safe brother !
@gertsy20002 ай бұрын
Just did this. Thanks so much for the video. Seems there is no intensity difference whatever gear is selected? I was expecting a shutter hole to black out the gears not selected and only illuminate the active gear. Just seems to be the PRND + - display illumination only. I guess there is the always the dash display. I can confirm a T5 bulb in the Lancer CJ 2010.
@streetweyez2 ай бұрын
Exactly what i needed thank you
@williamgates43992 ай бұрын
You really don't know what you are doing, do you?
@MazinJabarin2 ай бұрын
No I didn't at that time, and there was no KZbin showing how to do it, so it was an experiment 😂
@karamalabduly77002 ай бұрын
Thanks ❤❤❤ that trick u Mack it worth many
@Malik-qc3ki2 ай бұрын
Thanks boss❤️ Very informative 🫡
@J3hxX12 ай бұрын
Is its use free for life?
@MazinJabarin2 ай бұрын
So far yes, they are getting better, every few months, I get software updates free. However till today can't read OEM data for my friend Mazda 3, I used it on Mitsubishi, Toyota, Nissan, KIA, Hyundai, BMW, Mercedes, VW, Renault, Chevy and Ford without any problem.
@user-to2vw6jo1t3 ай бұрын
Hello my friend, upon examination, the code twenty-three ion appeared. What is ion?
@MazinJabarin3 ай бұрын
check the following links and follow instructions: www.ksmanual.com/cluster_ionizer_inspection-1436.html www.ksmanual.com/cluster_ionizer_replacement-1437.html
@rachellee64093 ай бұрын
Wonderful instructional video! Thank you! 45YOF was able to successfully change out the old sideview mirror w/a new one, all by myself!
@kara5219-Krose_83 ай бұрын
Thank you so much for this, it was VERY helpful!!!
@216_._photography23 ай бұрын
That's the exact door and window broke on mine. Very Informational, thanks for the help!
@ahmedalbousifi33323 ай бұрын
السلام عليكم عيدك مبارك. My car is Kia K5 2012 . The internal fan blower was not working even if i press Mode botton i did the test it give me 00 code and as just i exit from the test the local blower start working. Thank you very much your video is very usefull .
@MohammedOmar-vx1hu3 ай бұрын
Hey can u send me those hinges since ur laptop is damaged 😥 mine is broken
@MazinJabarin3 ай бұрын
I would if I still have them
@hhwilly-ng3 ай бұрын
Good for reference. For anyone curious to open one up; one of the black panels on the bottom sit more tightly than the other, it should not be removed. Removing it destroys some plastic "rivets" that are used to attach it. You can do all the other steps while leaving it on. If you do remove it, the laptop can still be fully reassembled though not as firm or tight as before.
@MohammedOmar-vx1hu3 ай бұрын
Yea i had nothing to do but to open everything up since i spilled water on it and now it doesnt work Today i realized my ram stick is damaged and that is why cpu wont turn on After i turned it on i realized keyboard and track pad doesnt work properly amymore Brought it on 2020 december since then my battery has damaged display hinges broken fan malfunctioning replaced hdd once even brought a duplicate adapter
@pazienza004 ай бұрын
Thank you so much 👍
@user-xk1mg4kx6m4 ай бұрын
😮😮
@seanmontana134 ай бұрын
This happened to me.i was driving 120KMPH and when i slow down to 100KMPH it appears just so quick.now I don't use my Lancer for a month and now The ABS light is Permanently on.
@MazinJabarin4 ай бұрын
In your case I would start by checking the values of the wheels speed sensor
@seanmontana134 ай бұрын
Well I used the car with the ABS light on and just a few meters it disappears. So I continue driving until I arrived to my friend and clean the brakes and check the all the ABS Wheel Speed Sensor. The 2 sensor on both front sides are dirty with old grease so i clean it. And now it works just fine. Thank you for the reply bro 👊
@seanmontana133 ай бұрын
The ABS light went on again just after 25km. I feel the pulsating feeling in my feet while pressing the brake pedal just right before the ABS LIGHT went to again
@seanmontana133 ай бұрын
Still the same trouble code P1773
@seanmontana133 ай бұрын
Also the driving is still normal and I don't feel the loss or Low power while accelerating.
@IronClan20245 ай бұрын
why dont they inform us about this issues ! i have the issue i cannot even create a new project. everytime when i load media , usualy i was able to see the videos or pictures in the eddit page on my timeline, now all i see is blue strips and no playback possible. Running on a AMD CPU with Intergrated Graphics , i had no isues till some days ago. No project can be opened neither new projects can be started ....nothing works davinci truns more and more very dissapointing to me which one more time tells me do not buy the studio version allthough i was planing on doing that for my music video production. but now this. some years ago i had very similar issues and one more time i wonder does this happen to those having the payed version aswell ? or does it happen only to the free version users to so get em pay for the studio version?
@MazinJabarin5 ай бұрын
I am not sure why but I believe the free version is facing much more issues than paid version, try this and it may fix your problem, 1- Update the GPU (from vendor driver not Microsoft update), 2-Reboot your OS, 3- Set DaVinci to run on the AMD GPU. if it is still not running send me the logs and I will take a look on my free time
@zulyahya74135 ай бұрын
i got the code 44. how to fix cluster ionizer fault?
wow... Thanks I just change my battery and it works now.
@kens320525 ай бұрын
Too bad you didn't show how it works.
@MazinJabarin5 ай бұрын
No Problem, will do a video about it soon if you want.
@fer20101215 ай бұрын
Excellent
@sherwinramos26365 ай бұрын
I have this in my 09 lancer P1773 and my daughter the one using it and after wAtching this maybe bad condition of our road snow and ice triggers the code cuz tires is slipping on 50-60 limit speed road plus i am using very wide 18” low profile all weather tires?.
@MazinJabarin5 ай бұрын
have you tested if the ABS is functional?
@Max_Mustermann6 ай бұрын
I'm considering replacing the fan on mine, as it's starting to make strange noises. Already bought a new replacement part, but the replacement procedure really seems like a nightmare. Almost as if Dell was assuming that the fan would never fail.
@user-ii8mm8kz1g6 ай бұрын
Super easy
@MazinJabarin6 ай бұрын
😂😂😂😂
@khx736 ай бұрын
Thank goodness... I can use "0" or "1" to turn darkmode OFF now.
@FSRaf6 ай бұрын
How to change the fan? Three simple steps: 1. put out aaaalll the parts, including LCD, door, motherboard, keyboard, etc., 2. Now you reach the fan screws, 3. Open them and put it out. 😊 It seems when designing the laptop, they first placed the fan, then put everything around it to secure it from theft. ✌️🔒
@MazinJabarin6 ай бұрын
🤣🤣🤣
@Max_Mustermann6 ай бұрын
Or maybe Dell thought the fan would never fail.
@ismailyilmaz50397 ай бұрын
Teşekkürler
@MazinJabarin6 ай бұрын
Üzgünüm
@ismailyilmaz50396 ай бұрын
@@MazinJabarin üzgün olmanıza gerek yok Ben de konsolunu söküp lambamı değiştireceğim yazdıklarımı anlamıyorsanız Translate kullanın
@bobrobson63937 ай бұрын
Hello, I'm interested in the procedure for changing the pin code for the device to make it more secure. Can you help me please.
@MazinJabarin7 ай бұрын
I remember there was a tool in Vgate download-center website to do such a thing but I just checked now and it is not there anymore, try to contact the support they may help you. Contact Details: www.vgatemall.com/contact/
@Mylifepriyanga7 ай бұрын
Mine got a problem, lose the original fob an the duplicate remote is only lock and unlock
@MazinJabarin7 ай бұрын
Sorry to hear that, try to get similar clone of the original key fob.
@ADITYASINGH-eb2kf7 ай бұрын
i have 3 codes in my mitsubishi outlander what should i do to solve them codes are : P1590 U0101 P1773
@MazinJabarin7 ай бұрын
check this case www.reddit.com/r/mitsubishi/comments/q6cpx4/solved_u0101_p1590_tcm_torque_reduction_req_comm/
@ADITYASINGH-eb2kf7 ай бұрын
Thankyou so much for reply will chek tomorrow and let you know 🫡
@briem.78277 ай бұрын
Can you add the link to where you purchased the part?
@MazinJabarin7 ай бұрын
I got it from a local dealer, if you are going to get it online be aware there are 2 types as I remember, one that with auto up and down for the driver window and another like in my case just auto down for the driver window.
@bangababii25211 күн бұрын
How much did it cost from the local dealer?
@rodbacon94897 ай бұрын
What a terrible video! Where is the error code list you referred to?
@maker._7 ай бұрын
Very well documented - thank you 🙏
@MazinJabarin7 ай бұрын
You're very welcome
@ivallejo14568 ай бұрын
It is that difficult?
@MazinJabarin8 ай бұрын
Yes, If you Just want to change the metal part No it is not hard.
@balb49038 ай бұрын
Thank you for your video !
@BobMarotta9 ай бұрын
Thanks for the helpful video!!! My 2012 Kia Sorento widow switch panel did the same thing as your car button did. I saved a lot of money watching you do this before attempting it myself. Initially I thought it just the 1 screw in the handle well. Never imaged I had to take the door panel out to complete the job
@MazinJabarin9 ай бұрын
I am glad it was helpful. Thanks for your feedback.
@qallegendz34529 ай бұрын
I have same code on my Lancer.One day it just stopped.Saying engine overheating.Still doesnt start.Checked,battery,fan,alternator oil and all.Everything is good.
@MazinJabarin9 ай бұрын
is there any other code stored? did you try disconnect battery and wait for some time and then re-connect and try to start the engine?