if adjustments are not doing what is expected, then either you have a tube problem, a wiring problem, or your chassis needs to be repaired as it has issues in the blue circuit. if the actual game blue parts do not change when you turn the adjustment knobs and just the entire screen changes, i am guessing it is a chassis issue and you need to send it in for repair. but if your chassis has never been serviced it needs to be before it fails or gets worse. please visit my site and email me, thearcadebuffett.com

HI, yes i do, please visit my site for contact info, thearcadebuffett.com

no, the degauss has no polarity, it is just a coil, plug it on in either orientation.

you bet!!!! enjoy your games!!!

this is a test tube ONLY, it has lots of burn from all the testing i use it for. i have no idea what the burn is in the owners CRT.

glad i could help get you up and running.

glad i could help get you up and running!!!

please visit my site for my email, thearcadebuffett.com

Awesome!! glad all your monitors are looking Fantastic!!! glad the video was easy to follow.

It was a K7600

cool story, thank you for sharing it. you do what must be done when the tools do not exist or you cannot afford them. glad you liked the video, thanks for watching. the 467 is a super good machine, it does it all in one complete package. hope all your rejuving was successful!!!

thanks, glad you like my work. it is a fun pin to play, it is a good tournament game as well, you can set it up very challenging. i still have it in my collection.

Gorilla Glue.

@@buffett1978 thanks buddy

@@HusseinAliRifath no prob, Happy Gluing!!!!

HI, there is no such U4000 chassis, i am guessing you are referring to the U5000. the answer is yes and no, Yes as it is a direct swap for a U2000 as the yoke is the same for both chassis. yes as it can work with other low impedance yokes. no, as it can have brightness, contrast and width issues that cannot be adjusted out if placed on another yoke it is not designed for. hope that answers your question.

@@buffett1978 yes I meant u5000. Sorry about that.

MKII is my favorite, that was one of my test tubes, it has lived a long life, it is now dead :-(

hi, please email me visit my site for my email, thearcadebuffett.com

your welcome, glad you found it helpful.

HI, thanks and glad you liked the video. no it is not that simple, there are a dozen or more parts that have to be changed and some re-routing of the traces to make it work and that is if you can still even do it. it is not worth the time or money to do all this. the 74/75 was the apology chassis line for the badly designed U5000.

yes it does. if you need it repaired, your welcome to send it in.

@@buffett1978 Thanks! I can rebuild and revive k7000s but that's about it. Can you repair a makvision c3125b tri-sync?

@@stringerfilms. no prob, hope the K7000 repair goes well. i can only service the Makvision if they are working to help them keep/stay working. i cannot repair the Makvision chassis if they are dead.

HI, i replied to your email.

that is just a test tube, it gets the yoke swapped on and off to test whatever chassis i need to test at any given time, no convergence or purity adjustments are done. also no rings are used to test as they are not needed.

the screen pot on the focus and screen tower.

@@buffett1978 thanks. You made that clear later in the video but at the time I was screaming at my monitor 😂

@@mopenstein cool, glad i did not leave it out of the video. hope you got it all adjusted.

@@buffett1978 sure did. The video helped me dial in my Sanyo monitor and it looks amazing. First time arcade machine owner and I was getting really frustrated. Thanks to folks like you, it's working great.

@@mopenstein Awesome!!! glad to hear you got it all dialed in. glad the video helped to answer all your questions. congrats on your new game, Nintendo games are some of the best to have and start with. if the chassis has never been serviced, please send it in and i will take care of it. Happy Gaming!!!

Your very welcome!!! thanks for the update status.

sup Tighe, there are quite a few differences, the width coil is different, there are around a dozen give or take different resistors, capacitors and other parts, the Linearity coil has different modifications on some chassis, there is a satellite board that affects the signal to neck board, the YOKE is different, a STD RES yoke CANNOT!!!! be used, there are jumpers on the bottom of the chassis in the width section that change or add traces not on the STD RES chassis. 99% of them are FAT neck tubes, only a handful of Skinny neck yokes exist. so lots of differences between them. if you do not know what your looking for on site you would mistake it for a STD res chassis.

nope, it adjusts just fine, the linearity may be not adjusted 100% this is also a 20" tube so the image will not fit 100% either. the chassis is 100% working as it should and all adjustments go threw their full range of adjustment.

​@@buffett1978 Right on👍Cool beans✌That is logical.🖖

@@equinoxshadow7190 yup, i yoke swap the same test tube, so it is never aligned properly, the rings are also never used. this allows me to get more mileage out of tubes so i can save room in the shop. a quick yoke swap and i am testing the next repaired chassis.

HI, yes i still sell them, please email me at [email protected] i have had good luck with rejuvination over the years, most tubes seem to be ok, yes there are some that fail again shortly afterwords, but in a home environment it seems to work well, in an Arcade where the already used tubes are run 8-15 hours a day, no, not as much pending on the tube. thanks for the support, hope you enjoy the videos i will continue to post in the future.

Hey Hey, sent you a discord message, hop on there and i can help you more.

@@buffett1978 ok cool. I’ll check it.

glad you found it an easy watch.

if you like this, i have other videos with more damage in them that was repaired, find the 2 Sanyo videos i just did and give them a view, it was a journey to repair them.

@@buffett1978 I'll give em a look! excited to see your channel grow!

@@Patrickbaby420 thanks, they are a sight to see in their broken states. as people see the channel, fingers crossed they stick around.

Your very welcome, glad it helped you.

Glad i could help you figure out your chassis type.

Glad you liked the video, yup it was a challenge, but it has saved another chassis from the grave and another game lives again.

see if you can ohm the heater pins, if you can that will narrow down what they are a little, if you have the neck boards you can trace the circuits to find the color guns and the ground pins, once you get that info you can match it up or post your readings, and maybe someone can help match them up. or i can make a custom adapter with your neck board if your trying to rejuve them, also is the tube a dual focus tube? some are if they have 2, focus pins.

Thanks, glad you liked the repair.