Добрый день, у меня проблема с матрицей 😢 сколько будет стоить замена? 58диаганаль
@mmwhitetech7 сағат бұрын
What its the problem exactly?
@ДимаКобылецькый3 сағат бұрын
@@mmwhitetech появились полоски на экране вертикальные
@mmwhitetech27 минут бұрын
Bad, need to replace, too expensive will be.
@Nina514422 сағат бұрын
How do we access the codes
@mmwhitetech22 сағат бұрын
Check and fix error 11 - E 11 on BEKO washingmachine WMB 71643 PTE. Test mode BEKO . kzbin.info/www/bejne/d5-TapuupNl0jqc
@9291578723Күн бұрын
🤝
@Nguyendat6012 күн бұрын
Tính mua mấy nay ma thấy hơi chê qua
@SomeSunshineOutside16 күн бұрын
I went through with this repair today, took me 4 or so hours. The end result was that the picture's back, but the three bottom rows of backlights show through the screen. when there's movement on the screen it's really visible.
@SomeSunshineOutside16 күн бұрын
kzbin.info/www/bejne/i2nRkqNue5iVe7csi=fRxQNkma6Bwmp-NU this is how it looks with a black background
@SomeSunshineOutside16 күн бұрын
there's also one way my tv differs from yours even though we have the exact same model 55PUS6754/12 -- the backlights are in one continuous stripe instead of two on each row, and they are called "LB-GM3030-GJ0D22555X10AN22-T" without ending in "R-1-T" or "L-1-T". The replacements I used were the same ones you used here, one left and one right on each row. Would this explain the backlights malfunctioning?
@mmwhitetech16 күн бұрын
Has to be shure that plastic spacers between backlight first lear and other lears on top its there on place. If they are in place, and all the magnifiers are on the diodes, then maybe there is a defective backlight. I can't be sure where exactly your problem is coming from.
@SomeSunshineOutside16 күн бұрын
@@mmwhitetech okay, so the backlight replacements being a different version from the old ones that came with the tv shouldn't make a difference? i might've turned the matte layer wrong side up on top of the backlights, but i know for sure the other layers were correctly placed. guess i'll try again. thanks!
@mmwhitetech16 күн бұрын
@SomeSunshineOutside i think its from wrong placed lear , good luck.
@tomasvalo277621 күн бұрын
Thanks for the great video. I have a model 7000 and I am not able to turn it on normaly but only when I unplug it from power for let say a second. Any idea pls? Thanks
@mmwhitetech21 күн бұрын
Need more info, afterthat switch properly?
@tomasvalo277619 күн бұрын
@@mmwhitetech yes after that it switch properly
@mmwhitetech19 күн бұрын
I think this is a board problem , its dificult to help from distance, sorry.
@tomasvalo277619 күн бұрын
@@mmwhitetech OK thanks
@Wanderer577527 күн бұрын
Anyone got a link for the exact replacement back light strips needed? 👍
@mmwhitetech27 күн бұрын
Find one in aliexpress
@user-on3fm9jw3m29 күн бұрын
Should be an lg backlight the new one? Or if I use any backlight is it affect the resolution of the tv?
@mmwhitetech29 күн бұрын
Hi, no affect the resolution.
@der.jhony.129 күн бұрын
Even though your video had no sound it still showed very well, I'm not an electrician but thanks to you I was able to repair my TV, thank you!
@mmwhitetech29 күн бұрын
Sorry for no sound I put the wrong background melody and muted it due to a copyright issue.
@der.jhony.129 күн бұрын
I just mean that without sound was also good, thanks for the video@@mmwhitetech
@silvaalmanyazarife3103Ай бұрын
Lütfen bana da yardım edermisiniz? Makinem de uyarı işareti ve 1 çıkıyor , çalışmıyor
@SomeSunshineOutsideАй бұрын
very nice that you have the exact same model as me. why does it need double tape when screws are holding it in place?
@mmwhitetechАй бұрын
The exact answer can be given by the manufacturer, in most cases it is for better fixation and heat exchange between the backlight and the metal back.
@signupsignup1648Ай бұрын
I have AEG watching machine, suddenly the motor stop to spin. I select the regime, close the door, press start. Door’s lock locked and watching machine start the first phase of water then 2nd phase of water but drum not spinning. Check the belt. Everything fine. Motor doesn’t have any visual sign of burning. Spinning the motor by hand no any hard movement spinning . The motor doesn’t have carbon brushes and has 6 pin connector. Would you please help me to point out where the problem is? Is there a fuse could prevent the motor from overheating? Please advise
@mmwhitetechАй бұрын
Im not sure, but i think that there it has to have brushes, if not , need to find a board that control only motor , usualy its at bottom near motor.
@signupsignup1648Ай бұрын
@@mmwhitetechthank you for answering my comment. The motor code is ELUX CODE: 132386803 If you have a look you will find out that this motor doesn't have carbon brushes unless I'm mistaken. I don't think the motor is burned. Please share your thoughts and asdivces. If possible allow me to buy you a coffee or contribute anything to your chanel
@signupsignup1648Ай бұрын
@@mmwhitetech Thank you for responding to my comment. The motor code is ELUX CODE: 132386803. If you search for it online, you'll find that this type of motor doesn't have carbon brushes. When I visually inspected the motor, it looked brand new, but it shows no signs of life. The washing machine doesn't display any errors at any stage, completing the wash cycle without the drum spinning. The water intake valve opens and closes at each stage, and the water outlet pump works fine.
@signupsignup1648Ай бұрын
Thank you for responding to my comment. The motor code is ELUX CODE: 132386803. If you search for it online, you'll find that this type of motor doesn't have carbon brushes. When I visually inspected the motor, it looked brand new, but it shows no signs of life. The washing machine doesn't display any errors at any stage, completing the wash cycle without the drum spinning. The water intake valve opens and closes at each stage, and the water outlet pump works fine.
@inguspodnieks5040Ай бұрын
just happened to me and its my friends tv black screen god damn it lol
@michaell.5474Ай бұрын
Hallo wo kann ich das komplette heizelement bestellen haben sie für mich eine internet seite bitte LG Michael
@edaco6343Ай бұрын
I have no error codes it just will not spin out properly
@ClaireV.-vu6zuАй бұрын
I did the reset tonight after a day and a half being in this strange situation . Yesterday a bit of melting in the top drawer but nothing too bad, then today it seemed to work ok. Though still with the blinking and bad numbers and red exclamation point. I did the reset like the video shows (a couple of times to make it right) but IT WORKED! Thank you so much!
@beyourself3514Ай бұрын
My beko affiche only 0 0 please what is the problème ?
@ismailifrik2766Ай бұрын
What does tst mean??
@mmwhitetechАй бұрын
Test mode
@elixier33Ай бұрын
No sound?
@Kn0bSh0tАй бұрын
Do you have a link to order the new strips possibly?
@mmwhitetechАй бұрын
Aliexpress
@babikirmkyb5991Ай бұрын
How to fix EO ?
@mohammedirshadali3815Ай бұрын
Talk straight
@Haenns01Ай бұрын
Thanks for your good video!!! It helped me a lot in repairing the TV of my neighbors. 👍💪
@bibhushadevkota44832 ай бұрын
Can you please help me, my Miele Washing machine is showing the rotating sign and the door is stuck, it's not working after that, what can I do? Please reply me ASAP
@mmwhitetech2 ай бұрын
Check drain filter.
@kkkdelloglio5982 ай бұрын
Perché non si svita con tutta facilità, come nel video ?
@robeveritt2 ай бұрын
We had the same fault code but with a different solution….. take the top off the machine and we found that a small drain pipe had come loose at the top of the machine….. we put the hose back on and secured with a clip…. Solved the problem…..
@markmoller2 ай бұрын
I have no screws at my backlight, how come?
@mmwhitetech2 ай бұрын
If the model its not exactly same ? There its no drama , just use good double tabe .
@user-oo2qy2xn8o2 ай бұрын
Молодчага, такая щепетильная работа -делаешь не моргнув глазом
@Atetus942 ай бұрын
Thank You very much! 😉
@ColinP-hg1rh2 ай бұрын
Shows how to dismantle your dishwasher but explains nothing about this error.
@mmwhitetech2 ай бұрын
Need to replace walve , but in this case there was a problem with board that controling walve . Wach to the end.
@ColinP-hg1rh29 күн бұрын
Thanks for the reply. It was actually the heat flow valve and also the control panel. Replaced both and it’s now working! No way I was replacing the control panel components. But your video helped more than any other. New panel was £60 not too bad. Thanks
@ColinP-hg1rh29 күн бұрын
Make sure the control panel is from a proper website part supplier and it says that the panel pre programmed tho. I read that there’s cheaper ones are aren’t programmed!
@peterzsalai38072 ай бұрын
👍👍👍 vielen dank!!!
@avtarhanspal25022 ай бұрын
We're to buy the led strips please?
@mmwhitetech2 ай бұрын
Chek on aliexpress
@magmar9992 ай бұрын
Hi , do u know how to turn wifi on this machine ?
@abdelkaderae24632 ай бұрын
Very good job, thanks.
@magmar9992 ай бұрын
Thanks, do u know how to turn wifi on this machine ?
@user-yt6sy5bv1b2 ай бұрын
❤
@user-pv5ib4ch3m3 ай бұрын
👍 machine réparée en 10 minutes. Merci. Filtre bloqué. J'ai nettoyé la pompe après l'avoir desenserclee avec une pince et un tournevis pour la partir centrale. Le filtre s'est deconincee après avoir nettoyé la pompe. Machine comme neuve
@shaheedkader54493 ай бұрын
I have a telefunken 43 inch, i want to replace backlight but im scared of damaging the screen... Great video
@di0nko3 ай бұрын
Which led models are suitable for this repair? 615mm?
@mmwhitetech3 ай бұрын
Chek in google mate. Or aliexpress for easy.
@di0nko3 ай бұрын
@@mmwhitetech just checked before my comment, but no idea. You did it for the video, so maybe you had a clear idea about it...
@mmwhitetech3 ай бұрын
@di0nko Product information Condition:Brand NEW Size (Length):630 mm Number of LED beads:7 Per strip Every LED Lamp Voltage:6 V Package include:1 set= 12 pcs LED Strip
Error code E2 This is a heater-related error that is most likely related to a wiring issue.
@peramitic63953 ай бұрын
good job, error F08 disappeared. Whirlpool FWSG 71283 BV
@leedan19943 ай бұрын
Thanks for this video helped me fix my machine 👍
@dionisiosciascia14163 ай бұрын
I have a beko RCNA406E40ZXB refrigerator. It is a no frost and the freezer temperature is not so cold and the alarm of high temperature is triggered very often. I also noted it is very often switched on. What should I check ?
@mmwhitetech3 ай бұрын
check for non working fan inside, happens with these models. If the fan is working then bad news for the freezer, it has most likely leaked some of the freon.
@Knegensk3 ай бұрын
Did this yesterday! worked awesome . But got the problem that the backlight now shows on the screen, you can se them pretty good . Did i make some error when i put it back together ?
@mmwhitetech3 ай бұрын
There is probably an error in the assembly of the layers, send me a picture so I can see.
@Knegensk3 ай бұрын
@@mmwhitetech Might be . Went in reverse on video so i might have gotten it wrong. I emailed you pictures of it .
@mmwhitetech3 ай бұрын
are you sure that you put the plastic spacers between the first layer and the hard plastic layer above the diodes
@Knegensk3 ай бұрын
@@mmwhitetech i did not , but i did now . still the same issue , maybe i put the wrong side down? got the blank side up and the see trough side down .
@SomeSunshineOutside16 күн бұрын
same problem here. what did you do?
@marcel_19783 ай бұрын
Geiles Video 👍 sehr gut erklärt
@marcel_19783 ай бұрын
Wenn der Bildschirm sporadisch schwarz wird, Ton ist vorhanden, und dann wieder das Bild von alleine kommt, was könnte das sein? Ich glaube sogar durch drücken / klopfen auf die linke untere Seite springt das backlight auch wieder an. Der Fehler macht mich wahnsinnig. Netzteil hab ich bereits ohne Erfolg getauscht.
@mmwhitetech3 ай бұрын
It's probably a loose connection between the backlight strips, or a diode that starts and stops by itself, sometimes they do that at the end of their life.
@marcel_19783 ай бұрын
So should I replace the backlight then? Thank you so much for your help!
@marcel_19782 ай бұрын
@@mmwhitetech it was the backlight. After testing with a LED Tester there was 3V difference between 1 stripe comparing to the others. And then 1LED completely failed and was defect. After change of backlights, the tv was fully functional. Thank you so much for your help. I appreciate your valuable support. Best regards from Germany 👍keep up the good work
@yevgenlagutin30043 ай бұрын
сегодня воспользовался этим видео для ремонта своего ТВ. Все получилось. Проблема была только с проверкой светодиодов. У меня нет такого источника тока, даже автомобильное зарядное устройство не помогло проверить ленту, пришлось сниматьлинзы и проверять каждый светодиод
@ThiemoSchuff3 ай бұрын
Thank you, but i missed Information about voltage and amphere to test the new stripes before assamble.
@mmwhitetech3 ай бұрын
Its special tool that its used for this test , search google for tv led tester.
@user-ed1pb1qs7r3 ай бұрын
Do you not earn a power supply to reduce the current strength of the backlight?