Dein Link funktzioniert nicht mehr. Welches model ist das? Ich müchte fur meine Ibiza auch so was kaufen, danke.
@Drxxx8 күн бұрын
Hm… bist du sicher? Multimedia heisst es “junsun “
@Drxxx8 күн бұрын
Schau im aliexpress oder vielleich am amazon?
@muratiris643315 күн бұрын
Peltier 12706And between peltier12715 What is the diffrence
@inessoares327726 күн бұрын
Hey.. how did you fixed the steering wheel controls not working ? Tyia
@Drxxx26 күн бұрын
Did you find in hidden menu? If not, try contact the seller
@juanwigge9110Ай бұрын
Dónde lo puedo comprar
@jumbo999614Ай бұрын
What voltage to the LED? No need resistors? and why red and blue not blink at the same time at low frequency?
@Drxxx3 күн бұрын
because they are antiparallel
@abdorreАй бұрын
Hi, it was a good video thank you, i have a question that i want to ask about the slicer you are using, i installed ultimaker cura but did not found the printer anycubic mega pro, what should i do?
@DrxxxАй бұрын
Use mega i3 (prusa)
@abdorreАй бұрын
@@Drxxx thank you
@igorsikovАй бұрын
Я в микроволновку на разморозку ставлю
@user-pw6hm3lg4tАй бұрын
It works fine. Thank you! But I'm desperate, why do I have to go to the trouble of soldering this part to get it to work? Is it a bad design of the board?
@DrxxxАй бұрын
Some modules used only 3.3V, this is why is so designed.
@sahebahmed8237Ай бұрын
Hi did you do the final bit where you screw the screen in
@DrxxxАй бұрын
Its all in video..
@angeloscirli2 ай бұрын
Salve il touch e in vetro o plastica ? con amplificatori suona bene ?
@caffeine46872 ай бұрын
@Drxxx i get 3v on the usb port. it's able to power a low quality office mouse but im getting no data transfer, the pc wont respond to the mouse movement. What could i do if your able to help.
@Drxxx2 ай бұрын
Did you try with 5V?
@ahmetcan67872 ай бұрын
Hafıza tutmuyor ne yapmamız gerekiyor.
@echo1142 ай бұрын
Do you know if this works in the 2015 seat Ibiza toca without the existing screen just a radio
@mapko622 ай бұрын
1, il mandarino non va avvitato visto che non c'è filetto ed è conico 2, la rondella spaccata va posizionato verso il dado e non sulla testa del bullone (fissaggio porta pezzo)
@uni-byte2 ай бұрын
Driving the LED directly without a resistor will only harm the op-amps on the FG output. Why do people do this?
@uthoughttherewasahaironurs99013 ай бұрын
I’ve just installed one of these unit but the issue I’m having is whenever i play something the sound only comes from the front two tweeters speakers. Do you know why. I’ve tried changing the settings but that didn’t work,
@Drxxx3 ай бұрын
Did you connect it properly? And check in hidden menu, you can adjust the sound, balance and so on..
@uthoughttherewasahaironurs99012 ай бұрын
@@Drxxx I’ve tried adjusting that however it doesn’t turn the door speakers on. My connection seems all correct and the same as yours. Ive seen other people speak about having this problem but can’t find a solution anywhere.
@Drxxx2 ай бұрын
@@uthoughttherewasahaironurs9901 try to connect the seller or service..?
@uthoughttherewasahaironurs99012 ай бұрын
good news bad news. I disconnected everything and reconnected it and the speakers started working. However the screen is draining my battery even tho the red and yellow cable is disconnected. Any ideas?
@Drxxx2 ай бұрын
@@uthoughttherewasahaironurs9901 9:56 in the video, rec and orange ist to disconnect. check in the shema..
@dzsoulsama3 ай бұрын
Hello, does the audio quality decrease in comparison with the original defaut autoradio?
@Drxxx3 ай бұрын
Yeah, its about 30% better with multimedia, i feel that is more powerful als before and you can adjust balance and so on…
@dzsoulsama3 ай бұрын
@@Drxxx thanks for the answer sir
@joshuacoombes34953 ай бұрын
I have just installed the radio everything works fine but I have no volume does anyone know what the issue is
@Drxxx3 ай бұрын
Check in hidden menu, you can set each button
@yannickrobert49884 ай бұрын
tks a lot :)
@Drxxx4 ай бұрын
You welcome 🥰
@rikinho92174 ай бұрын
which cabels are needed for the camera? ive tried the back lights one but it isnt shown in the video at 6:30 ? thanks a lot for the help!!! 🙏🏽🙏🏽
@Drxxx4 ай бұрын
Find positive wire from reverse lights, this puls goes to the multimedia or camera, some multimedia doesnt need this trigger wire. Connect as i did in the video and it will work
@OkeseАй бұрын
I also got lost at the camera section. What do i connect to the postive wire of the reverse light?
@Jamie-jo7sm4 ай бұрын
What if my ibiza model has hazard lights where the original head kit was? Its 2013 just not double DIN?
@haiderali98593 ай бұрын
u need to find the switch of an older model where the hazard light assembly is near the gear stick and then get a relocation harness to set the wires up.
@yakir20104 ай бұрын
Am I the only one who can't decrease or increase volune via the handle left to the wheel?
@Drxxx4 ай бұрын
Did you find hidden menu, you can set each button on wheel steering.. check in video..
@yakir20104 ай бұрын
Doesn't work bro, the system doesn't recognize the buttons :(
@Drxxx4 ай бұрын
hm.. did you contact your seller ? i orderd these on aliexpress, you should have a support from seller..?
@yakir20104 ай бұрын
@@Drxxx I'll try bro, thank you.
@andreimanea724 ай бұрын
how do you activate the steering wheel options (comands)?
@Drxxx4 ай бұрын
No, i dont have it, but you can programm it in hidden menu, check in the video, i put also the passwords
@anasyoussoufi4 ай бұрын
thanks man ! it's very helpful, however can soleone tell le hiw to use apple car ? thank you in advance 😊
@owenpotts34435 ай бұрын
There are rubbish people.
@Drxxx5 ай бұрын
?
@1984swany5 ай бұрын
Hi, fitted today and have a few questions if you could answer please: 1. My car is a seat and the can unit identify it as a VW, steering wheel controls do not work. Is there a connection for these? 2. Rear Camera distance lines are not shown, looked through all the settings which seem correct, can you advise? 3. I was looking to go into developer mode but it needs a password tried the one on the video and a few generic ones which are wrong, can you advise? 4. When I click on ‘video’ it plays sound with warning on the display saying ‘do not watch video while driving, I’m stationery and it will not show the video? I don’t see the menu on mine for the boot to change icon? Thanks
@Drxxx5 ай бұрын
Hm, for steering wheel check in manualls for passwort, i showed in video one of 2 passwords.. chekc in camera options if you can turn it on and off
@otto2085 ай бұрын
very helpful, thanks😉
@Drxxx5 ай бұрын
Thank you ❤️
@ManuyVeru5 ай бұрын
Amazing video. Great job!!
@Drxxx5 ай бұрын
Thank you 🥰
@botibharat93485 ай бұрын
Hi How can you remove the small plastic stuffs to get rid of the screw?
@Drxxx5 ай бұрын
Try to put sicker on it, or with duck tape.. if doesnt work, try with phone repair kit
@Drxxx5 ай бұрын
Try to put sicker on it, or with duck tape.. if doesnt work, try with phone repair kit
@jdhenckel25 ай бұрын
My project uses 40 of these USB shield. after solder the jumpers 5,5,3, then still about 20% will not work. no power gets to the USB port. HOWEVER I DISCOVERED A FIX. it works for me to simply BEND UP the USB PORT. I should be parallel to the board. Also when you insert the USB cable, then wiggle it and pull it out slightly. I have gotten all my Shields to work using this. I highly recommend you to purchase a USB voltage meter. with poor connection you can get only 2.6 v and it fools you.
@Drxxx5 ай бұрын
Thanka for sharing 🥰
@sten52345 ай бұрын
hi. On the camera wires I connected the red one to the reverse gear wire and the black one to the minimum ground wire and on the radio I only connected the yellow connector. It doesn't work, the image appears with interference and nothing is seen. Any tips?. And great video
@Drxxx5 ай бұрын
For some models you should connect on multimedia extra red wire, for this model, you should connect only 12V from Reverse light, the camera starts working and send the singal to the miltimedia, if it doesnt work, try to connect the camera with 12v battery
@bradjohnson36006 ай бұрын
ware did you get the little crimper , nothing else works in that terminal block...
@Alejandraume156 ай бұрын
Hola podrías resolverme una pregunta conectando asi la radio no va directa a la bateria y la descarga es que al momento de apagarla nose si se apaga del todo o se queda en stand By… gracias por tu ayuda
@luap66 ай бұрын
Which one of the cables are for the reverse light? 6:27
@conorwalsh78205 ай бұрын
Did you ever figure it out?
@luap65 ай бұрын
@@conorwalsh7820 yeah, blue-green cable for live 12v, brown cable for ground
@tobymurs64956 ай бұрын
You son of a wh0re why didn't you show the CANBUS cable going in ?
@floki56746 ай бұрын
Thank you
@patyoutube41146 ай бұрын
If i disconnect the orange and red cable ny radio powers off. If i disconnect the other red orange cable which is connected with a red and black smaller cable ny radio doesn't turn off when i get my keys out. How do i need to fix this?
@Drxxx6 ай бұрын
Check in the video, i showed the connector which needs to be disconnected
@patyoutube41146 ай бұрын
@@Drxxx i did disconnect that cable but then my radio shuts down and won't work anymore so it looks like its a power cable or something
@Drxxx6 ай бұрын
@@patyoutube4114 did you connect it properly? The main connector, check fuses
@ritolozano18746 ай бұрын
Alfuien tiene la contraeña de fabrica?
@julpasali6 ай бұрын
Where did you get the unit from?
@Drxxx6 ай бұрын
You have link in video description
@cristinagarcialopez81816 ай бұрын
Debería de apagarse la radio una vez apagas el coche y quitas el contacto??
@MrGalan136 ай бұрын
Si, lleva un conector negro con dos cables, hay que desconectar ese conector y ya se apaga al quitar la llave
@markan6676 ай бұрын
Cool 👌🏻👌🏻👌🏻
@Drxxx6 ай бұрын
Hvala kolega 🥰
@jennym_edits7 ай бұрын
do i have to install the rear camera looks complicated actually its just the wires that confuses me with the back camera the bit with the headlight and how you run the cables to the front or if there is already cables there you can use
@Drxxx7 ай бұрын
For camera you should install the camera cable from multimedia up to the camera. This is most complicated part. From the headlights you should find + terminal from reverse. That’s it.
@jennym_edits7 ай бұрын
@@Drxxx thank you does the parking sensor still work fine with beeping
@RP-td4ss7 ай бұрын
Servus, wofür muss ich die Lichter hinten abstecken ? Ist das nicht illegal oder stecke ich die Lichter dann wieder an ? Weil damit dusconnecte ich ja wenn ich Bremse die Stopplichter oder kannst du das mir kurz erklären. Danke
@RP-td4ss7 ай бұрын
Also wenn ich sie abstecke hat es noch immer die selbe Funktion wie wenn ich es angesteckt lasse ? Oder erklär mir das mal bitte
@Drxxx7 ай бұрын
Das habe ich gemacht nur damit ich sehe wo das R-licht kommt. Du brauchst positiver signal vom R licht und sie schaltet kamera automatisch ein.
@RP-td4ss7 ай бұрын
@@Drxxx also brauche ich den Schritt mit dem Rücklicht Gar nicht machen ?
@Drxxx7 ай бұрын
@@RP-td4ss du muss nur + und - finden vom R und verbinden laut Bedienunganleitungen vom Kamera
@sergiomedina70047 ай бұрын
mi radio es igual y no me detetecta los mandos del coche, que puedo hacer?
@Drxxx7 ай бұрын
Chech in hidden menu, find it on the video, there you can programme all buttons and steering wheel
@zainkara65238 ай бұрын
Did your volume buttons under steering wheels have any issues after instaling this?
@Drxxx8 ай бұрын
You have hidden Menu in multimedia, you should all buttons programming for what they are, check in the video..
@Sylvie279208 ай бұрын
Pour afficher une température de Référence: RF: Affichage de la valeur de référence: Appuyez sur le bouton de mesure 3 et alignez le pointeur laser avec cercle laser à 8 points 1 à l‘endroit dont la température servira de référence. La température s‘affiche alors à l‘écran 5. Maintenant, appuyez sur le bouton °C/°F/SET tout en maintenant le bouton de mesure 11 pour reprendre la valeur de température comme valeur de référence. Cette température est affichée sur l‘écran comme un indicateur de référence 6 à côté de l‘indicateur „REF“.
@mous240009 ай бұрын
mein gott ist das ein schrott
@Drxxx9 ай бұрын
Ja, leider ist es so.. wirklich nur für Hobby..
@madbeatstu9 ай бұрын
Thanks for the video. Nice simple cable runs. Also that standby disconnect tip is a likely a life saver.
@Drxxx9 ай бұрын
Thank you 🥰🥰
@AeiouCODM9 ай бұрын
Sir can i use this as charger for my 4s2p lifep04 battery pack 12ah