Work perfectly after trying for myself different techniques which did not work.
@insane771817 күн бұрын
Lol
@marwanbinkallialmarri946819 күн бұрын
After data reset in id6 driver profile not show ? Could u help me
@user-mq2tu4ix3xАй бұрын
Thank you, I have same problem with the one. Your video is very helpful ❤
@EndTheFed19332 ай бұрын
Thank you for this!
@DifficultmadeeasyАй бұрын
You are welcome!
@sarimassalha42162 ай бұрын
Worked like a charm!! Thank you ❤️❤️❤️❤️ just make sure that you turn on the swimming activity in the activity app so that it’ll water lock the watch ❤️
@DifficultmadeeasyАй бұрын
Glad it worked for you Sarimasalha
@wellwba2 ай бұрын
It worked!! Thanks man!
@Difficultmadeeasy2 ай бұрын
You're welcome!
@BEEFTEEF42 ай бұрын
Great video. Gave an AW2 to my daughter but the original band was stuck. 5 seconds of hot water freed it up. Wrist band swapped. Thank you.
@DifficultmadeeasyАй бұрын
Glad it worked! Happy daughter now hopefully!
@javierronda2 ай бұрын
It also shows unsuccessful if you have the parking brakes engaged. Red light next to park button has to be off 😉
@muhammadalijalaluddinrazal37532 ай бұрын
i really scare to pull that connector.
@MasSmokes3 ай бұрын
Must’ve gotten paint or cement between mines, thought it wasn’t gonna work but after about 10 minutes it did! Band is swapped after 2 years thanks
@drew77793 ай бұрын
Thanks!
@DifficultmadeeasyАй бұрын
your welcome
@cesarqba3 ай бұрын
Thanks
@hakkiyayla53513 ай бұрын
Thanks man!
@Difficultmadeeasy3 ай бұрын
Happy to help!
@oml43933 ай бұрын
brilliant, worked a treat. was RAGING before
@Difficultmadeeasy3 ай бұрын
Glad it worked for you oml
@SunshyneHarmony4 ай бұрын
Thank you so much !!
@Difficultmadeeasy4 ай бұрын
You are welcome!
@umashananayakkara43504 ай бұрын
Oh my gosh!! It worked 😭TUSM❤
@Difficultmadeeasy4 ай бұрын
You are welcome! Glad it worked for you!
@robertguest30465 ай бұрын
Nice job! Thank you
@Difficultmadeeasy3 ай бұрын
Glad it worked for you
@bayanibrahim14185 ай бұрын
It worked like magic thank you 🙏🏾
@Difficultmadeeasy5 ай бұрын
Happy it worked for you Bayani!
@alohadeals5 ай бұрын
Wow, thank you so much! Worked like a charm and I was almost to the point of throwing it across the room!
@Difficultmadeeasy5 ай бұрын
Excellent, glad it worked
@maqboolahmad33115 ай бұрын
Thank u so so so so so much
@Difficultmadeeasy3 ай бұрын
You're welcome 😊
@dominikstolarski12485 ай бұрын
GENIUS!
@Difficultmadeeasy5 ай бұрын
Haha, thanks Dominik! Glad it worked for you
@chrisgoldizen76635 ай бұрын
Thank you for the video I just replaced mine only took two hours
@sd5ten5 ай бұрын
😂😂😂😂 Hackery at it’s finest. I am not worthy 🫡
@wajidhassan7896 ай бұрын
What is the original size of the battery
@grantknott6 ай бұрын
Hey, thanks so much for that. I have a Jeep Wrangler Jk 2011 and my mechanic reckons that my evaporator is leaking. (this was done after a re-gas attempt and then a subsequent UV dye check performed) He's quoting me 10 hours of labour and parts. All up around $2500. He also suggests replacing TX valve and desiccant bag. I'm not sure whether I have to do that because just the evaporator is apparently leaking. By the way, unlike some of the other commentators, my cool air is gone. I'm in the tropics and boy do we need it. Do you know anything about TX valves and Dessicant bag? Would I need them? Anyway, love your method I really want to give it a go..... *When you mentioned...."unhook the top heater core hose going to the engine and fill it with antifreeze. Reattached and used one of these funnel kits to get rest of air out. Got to attach funnel and let jeep get up to temp. You will see all trapped the air bubbles come out. OEMTOOLS 87009 No-Spill Coolant Funnel Kit, Near Universal Fitment, Translucent, 15 Piece Set, Cooling System Funnel Allows Access To Hard-To-Reach Radiators" ....... And please forgive the dumb question..do you do this after or before? Thanks.
@KFilms20246 ай бұрын
Worked. Thanks for the tip!!!
@Difficultmadeeasy5 ай бұрын
Great!
@KFilms20245 ай бұрын
@@Difficultmadeeasy Thank you so much for the help. You have earned yourself a subscriber +1. Have a great 2024.
@Difficultmadeeasy5 ай бұрын
@@KFilms2024 much appreciated!
@poundermonster7 ай бұрын
Great video!! I got a warning light saying brake system: drive moderately. I check my break system on the screen and the rear pads are orange, you think that triggered that warning sign?
@MrMan-hy2kd7 ай бұрын
Worked on the first try. Thanks
@Difficultmadeeasy5 ай бұрын
Glad it helped
@daninla77567 ай бұрын
Good info, worked for 2012 wrangler sport, little difference.
@syaifulalam12517 ай бұрын
Can we plug in the charger and run this laptop without its embedded battery?
@Difficultmadeeasy3 ай бұрын
Yes, that should work
@user-lv8mn9qd8k7 ай бұрын
How to water lock Apple Watch
@danielh25535 ай бұрын
It’s waterproof dummy, you can swim with it
@Difficultmadeeasy5 ай бұрын
Turn Digital Crown and hit the water droplet. To be clear, Water Lock does not make your Apple Watch any more water-resistant. Rather, this feature prevents your device from interpreting contact with water as a prompt to perform a task.
@isaacjones71847 ай бұрын
Do you need to worry about refilling the coolant that leaked out? if you do need to, is it as simple as just pouring in the radiator or do you need to worry about air pockets?
@Difficultmadeeasy7 ай бұрын
You can refill from radiator, but will need to purge/bleed the air out
@isaacjones71847 ай бұрын
Oh gotcha.. any suggestions on how to do that easily? Or any videos you recommend?
@Elkeurti457 ай бұрын
Sir thank you🙏🏻
@Difficultmadeeasy7 ай бұрын
Most welcome
@honuputters18917 ай бұрын
I tried all sorts of things to unstick a silicone band that had been in the watch for several years - warm water, alcohol, WD-40, cursing, toothpick, toothbrush, small screwdriver, scalpel. Nothing worked until I clamped the band in a bench vise near the attachment, so I could pull hard on the watch with one hand while pressing the release button with the other.
@Difficultmadeeasy7 ай бұрын
Wow, sounds like it was really stuck!
@honuputters18917 ай бұрын
@@Difficultmadeeasy It is hard to hold the watch firmly without pressing various buttons, making it try to wake up and complain about wrong passcodes, locking out passcode attempts, etc. You need three hands, with one of them being very small and able to fit between side buttons and crowns. I thought of 3d printing a holding fixture, but ultimately did not need one. Apple is the king of difficult-to-service.
@Difficultmadeeasy7 ай бұрын
Try turning off before attempting to release band
@brucerussell37657 ай бұрын
You sir are a lifesaver 🫡 also don’t forget the water lock guys!
@Difficultmadeeasy7 ай бұрын
Haha, I try!
@ayeayeronmolay36998 ай бұрын
Thank youuuu
@Difficultmadeeasy8 ай бұрын
Your welcome
@MichaelWesseling-dd4uf8 ай бұрын
Thank you, worked like a charm!
@Difficultmadeeasy8 ай бұрын
You're welcome!
@pri95868 ай бұрын
Man you are a genius. This worked
@Difficultmadeeasy8 ай бұрын
Haha, I appreciate that. Glad it worked for you
@tracyfressel24878 ай бұрын
So helpful! Thank you.
@Difficultmadeeasy7 ай бұрын
Glad it was helpful!
@beatriza.46268 ай бұрын
omg the watch is waterproof??? I had no ideas
@neikan19 ай бұрын
What heater core did you order? I assume its not the stock one since the plumbing is shorter. Or did you order a stock one and mirror the cuts? Thanks!
@Difficultmadeeasy8 ай бұрын
Sorry for delayed response. Here is one I ordered. Yes, mirrored cuts on new one. Spectra Premium 99370 Heater www.amazon.com/dp/B008VN02B0?ref=ppx_pop_mob_ap_share
@artymartins19129 ай бұрын
So I have the problem where the left drivers vent comes out cold. Do u believe a new heater core would solve this issue?
@Difficultmadeeasy8 ай бұрын
My issue was similar to yours where passenger side was just a bit warmer, but still not hot. It got progressively worse. In my case it was the heater core since half of it was not allowing hot water flow. I would check all other possibilities first like making aure the blend door is working correctly
@mattarmstrong15627 ай бұрын
Your heater core is most likey clogged. I did mine this weekend & the old one weighed about 3 times what the new one did. Most older JK's don't have dual zone, so should only have one blend door.
@user-wc7ns4mu9v9 ай бұрын
Good video thanks I appreciate it. Save day
@Difficultmadeeasy9 ай бұрын
Glad it helped
@ppupo9 ай бұрын
Hi, you mention 7220 but on the description you say 7280. Which Latitude version is it? Thanks
@Difficultmadeeasy9 ай бұрын
7280
@garryleannon9 ай бұрын
*promosm* 🤭
@67389 ай бұрын
how did you mount thay brackey back on ? did you weld it?
@Difficultmadeeasy9 ай бұрын
If you cut the bracket in the place I showed in video, no need to weld anything. Just put everything back together and will work fine.
@songbirdlallen9 ай бұрын
So helpful!!!! Thank you!!
@Difficultmadeeasy9 ай бұрын
You are welcome!
@dani3oy10 ай бұрын
YES YOU FUCKING GENIUS
@Difficultmadeeasy10 ай бұрын
Haha, thank you. Glad it worked for you!
@teejaymcglynn10 ай бұрын
Need to do mine and was looking for a vid that shows the evacuation of coolant from the lines during or after the two cuts. How much coolant came out? Should I pinch off the lines under the hood ?
@Difficultmadeeasy10 ай бұрын
12-16 ounces. I didn’t pinch the lines under the hood.