You need to show the curtain from a bit of a distance - to see how it falls.
@DBM7604Ай бұрын
Such a helpful video!! Tysm 🙏🏽 Had an easier time installing ours following this!!
@andreamcdonaghАй бұрын
Hi can I not hammer a nail to make holes for hooks? Obviously just a tap to make small hole .
@jmk1962Ай бұрын
Good video but I find it odd that companies are still selling curtains in inches when we went metric in 1972 and I'm 62 years old and have been using metric for decades. You talk about the curtains in imperial and then talk about the curtain pole in metric. Maybe you should show both in your charts so clients can chose which measurement to look at.
@AngelyanaLeeАй бұрын
Thank you😍
@user-gi2zl3pr7l3 ай бұрын
How do i attach those little hooks without a drill? I don't have one or know how to use one...
@Woodyattcurtains2 ай бұрын
Ideally you need a drill, perhaps find a local friend who has one you can borrow or a local neighbour, with a drill this will only take a few mins and is the easiest way
@sunkat763 ай бұрын
Thank you for all the detail and the explanations not just a 'how to' video but a 'why we do it this way' video. This makes a difference when choosing a youtube DIY video. Cheers. Kate.
@Woodyattcurtains3 ай бұрын
Thank you - glad you found it helpful
@sunkat763 ай бұрын
@@Woodyattcurtains welcome :)
@zasr71713 ай бұрын
Can I drill into my aluminum windows?
@Woodyattcurtains2 ай бұрын
Yes you can drill into aluminium windows, but make sure you only drill approx 5mm deep so you do not drill into the glass. If drilling into aluminium a self tapping screw would be better - watch this video - kzbin.info/www/bejne/o5Sxo6OJa6mBaLc at around 2mins 55 seconds
@saranconde77323 ай бұрын
Merci grave ça vous j’ai reçu à maître mes rideaux ❤🎉
@Woodyattcurtains2 ай бұрын
Brilliant! Thank you
@lucegene52233 ай бұрын
Just what I needed to know. Thank you.
@Woodyattcurtains2 ай бұрын
Glad it was helpful!
@kylekeenan34853 ай бұрын
Omg one of the best videos on KZbin, thanks for this!
@yvewilliams37353 ай бұрын
Watched again 3/5/24
@JohnnyLycan7073 ай бұрын
Yes you covered the width . ....but what about the drop...where exactly do start to measure the drop from......the top of the curtain, .. ??? the top of the pole, ....???.....from eyelets or what, not everyone does this for a living and for someone who does I thought that you would have covered this part as well. Johnny Lycan.
@Woodyattcurtains3 ай бұрын
Hi John, apologise for the confusion, there is a separate video for the eyelet curtain height which you can see here - kzbin.info/www/bejne/jqe0dHR8mctoj6M
@JohnnyLycan7073 ай бұрын
@@Woodyattcurtains Thank you and my apologies for slightly abrupt email. .... just read it again and it kind of comes over as a little rude, so I'm sorry about that.......and thanks for the link. Johnny Lycan.
@janetwhite70624 ай бұрын
Very helpful, never knew you could hang pencil pleat curtains on a pole before!
@Woodyattcurtains2 ай бұрын
Glad it was helpful
@masreshabogale2764 ай бұрын
Thank you so much....rely i appreciat
@Woodyattcurtains2 ай бұрын
Thank you, I am glad it was helpful
@kitty_boy_7kb724 ай бұрын
Ffs 🤦 ive been screwing the little hooks into the plasterboard reveals for the past 5 years. This is so obvious, thanks.
@Woodyattcurtains2 ай бұрын
oh dear lol, Thank you for the feedback , at least you know a quicker way of doing this now
@Lastockaaa4 ай бұрын
Thank you very much!!!
@abbasmalik36744 ай бұрын
very nice
@Woodyattcurtains2 ай бұрын
Thank you
@Vxnom164 ай бұрын
Thank you so much ❤
@Woodyattcurtains2 ай бұрын
You're welcome 😊
@samanthabaines6395 ай бұрын
My walls are concrete prefab, so trying to drill into them they either crumble, or the drill hits stones
@Woodyattcurtains2 ай бұрын
If you wall is really crumbly, you could could repair and fill the holes - and redrill them - similar to this video - kzbin.info/www/bejne/b2GbnnSZncuUZ8ksi=YZq-XDCQYxai_Owe or put a white wooden batten across the top of the window and screw your pole brackets to that
@iam_churchill5 ай бұрын
I left 4 inches from all the 4 sides of my window it worked great for me..
@Woodyattcurtains2 ай бұрын
Glad it worked out ok :-)
@butch9075 ай бұрын
thanks alot you saved me alot of aggravation
@Woodyattcurtains2 ай бұрын
Glad it was helpful
@monicaa786 ай бұрын
Based on this I messed up when I installed my pole.
@Woodyattcurtains2 ай бұрын
Oh dear, get your pole width right first and then when your open your curtains you will still let plenty of light in
@muhammadhussain8606 ай бұрын
What can i do if i forgot to tie the knot and the cord has now come out completely
@julia12676 ай бұрын
This made putting up my curtains easy, thank you!
@Woodyattcurtains6 ай бұрын
Glad it was Helpful
@marian99846 ай бұрын
Great to have it explained so well. I want to change from pencil pleat to eyelets but my current rods are held up by ring brackets (that the pole slides through ) rather than hooks that the pole can sit. Do I need to change the brackets?
@debsp51286 ай бұрын
This was so helpful. Had no idea what drill bit I'd need. Great tips creating template with cardboard and getting the right tension on the wire.!
@tsh38286 ай бұрын
Proper appreciated that mate, thank you. You’re superstar
@jormareynolds39956 ай бұрын
Nice video, lots of ideas, clearly put across, in a relaxed friendly manner 😊
@Woodyattcurtains6 ай бұрын
Thank you! 🙂
@Woodyattcurtains7 ай бұрын
What do you think ? How do you like to hang your net curtains ?
@michaelbond647 ай бұрын
Amazing level of detail explained & knowledge in these videos to make it easy to work out & understand. Great job!
@Woodyattcurtains6 ай бұрын
Thank you
@davidkemp61967 ай бұрын
Excellent video. Well explained ❤
@ikhan91507 ай бұрын
Good
@danielintheantipodes67417 ай бұрын
It seems clear and strait forward! Thank you!
@hankjeffries25968 ай бұрын
JUST AS HE IS DEMONSTRTATING THE TILLT WAND ATTACHMENT, THE FOCUS GOES OUT! GREAT TIMING.
@mc17038 ай бұрын
I would recommend a carpenters awl to make the holes. Much quicker and no chance of oversinking.
@mbalenhlehadebe64738 ай бұрын
Thank you soo much, thus was beyond helpful 😊!
@Woodyattcurtains2 ай бұрын
Glad you liked it :-)
@choicest18 ай бұрын
Thank you,,
@galinarou8 ай бұрын
That was super clear and helpful, many thanks
@fionacarter8128 ай бұрын
My radiator is directly below the windowsill. How should I measure this so it looks okay?
@Woodyattcurtains2 ай бұрын
It depends on how close it is too the window sill, If the radiator is approx 6 inches below the window sill, You could measure from 1 inch above the radiator, You need to make sure the curtains do not catch on the radiator and also come below the window sill to block out light and look in proportion to the window. It is personal preference so up to you.
@mikefamilyman8 ай бұрын
perfect
@opencurtin9 ай бұрын
Hi my cord has a white little plastic box that joins the cord together but when I go to open the blind it stops the blind from fully going up , you can open the plastic joiner but I don’t know how to make the blind go up or down fully without this plastic joiner catching at the top as it uncoils or recoils , the blind drop is 170 cm so why should it not go right up to the top 🔝?
@Woodyattcurtains2 ай бұрын
I am not sure what brand roller blind you have, but normally the chord mechanism on the side of the roller blind is pushed tightly into an aluminium tube of the roller blind . You need to take the roller blind down from the widow, slide the chord mechanism out from the side. And push the chord mechanism back in so the joiner does not catch, then you will be able to operate the blind so it opens and closes fully
@BantuNiLo9 ай бұрын
We need all those tools just to screw something in
@Woodyattcurtains2 ай бұрын
yes sadly you do
@MsMidgetme9 ай бұрын
Would love to know how to put up an extra long tension rod on a wide window (236cm) and prevent bowing. How do you hang nets if there are additional supports added to the rod. I cant believe we are in the 21st century and this problem has not been resolved. Very little info/demonstrations online. Thank you.
@weallmakechoices74569 ай бұрын
Thank you very much for this video. Now I know what to do.
@paulbull34319 ай бұрын
If you do it measuring from the back and the recess is different sizes left to right the blind will look bent to the eye. If it’s straight (square) it will be fine though