5 жыл бұрын
Пікірлер
@mksagal 2 күн бұрын
is that an 18650 battery cells?
@liminalsunset 2 күн бұрын
Yes, they are using LithPlus 18650 cells in the 2nd gen. I do not know if they use different suppliers for different batches.
@Perplexer1 2 күн бұрын
Two issues with this device: 1) The included USB-A to USB-C cable does not allow this device to draw more than 0,34A from a charger, making it useless. I don't know why they even include it. You need to use your own quality cable to get the device to draw 1,9A from the charger. 2) In my case the device didn't stop charging at all. The battery voltage reached 4,33V at which point I manually disconnected it from the charger. Who knows what would have happened if I relied on it to stop by itself and left the room!
@user-xBARMALEJx 7 күн бұрын
Kanal NICHT EMPFEHLUNGS WERT = Zuviel Werbung.
@SonnetGomes 8 күн бұрын
Is it possible to replace the lipo with 18650? Thank you for the teardown. The thing with aliexpress lipos, the cells degrade very quickly. I have a kerpu unit, and it just lost it's power after two battery builds.
@TorchHacker 16 күн бұрын
I bought a FNIRSI SWM-10 while in China and I had to send it by sea to Australia. Can't take it on an airplane due to the powerbank feature (not allowed with checked-in luggage) and the spot welding feature (not allowed as carry-on).
@Feddyka-j9z 21 күн бұрын
Nice video man, i juat wondering if this device produces water just like conventional compressor?
@liminalsunset 21 күн бұрын
It probably does produce water, though considering the amount of air passing through it, the amount of water would be proportionally smaller and probably wouldn't build up enough under normal use to be noticeable.
@Feddyka-j9z 21 күн бұрын
@@liminalsunset right, thanks man
@derekdauzat 22 күн бұрын
Could I remove the internal battery and install a wired TX60 connector to use an better external battery
@liminalsunset 21 күн бұрын
You might want to use an XT90 for this, but there is no reason why you couldn't. Granted, I think it would be hard to find a battery that would deliver significantly more than the 1000A this is already capable of. Increasing the voltage will likely burn a lot of things out as this is only designed for one series cell.
@jasperaguila5513 22 күн бұрын
Hi. Would tounhave a video tear down of the 2s? I need to know how to do it because i need to clean the pressure sensor part. Im having issues with mine stopping sbruptly and not continuing to pump. Thanls
@liminalsunset 22 күн бұрын
Hi, I didn't know the 2S was out already! If you meant the 1S, I have an older video on my channel of it. The pressure sensors don't seem to have changed much between generations.
@liminalsunset 22 күн бұрын
@@jasperaguila5513 If I'm not mistaken, the pressure sensor itself is mounted using two screws on the side of the housing of the sensor hose end. You would be able to remove it this way. I'm not sure if the main hose or any other hose is unscrewable, which may help.
@jasperaguila5513 22 күн бұрын
@@liminalsunset got it. Let me try that out tonight when I get home. Thank you for the tip!
@MelodyJimenez-g3x 25 күн бұрын
Hello @liminalsunset I was wondering if I could be able to purchase this device.
@barrygreengrass3379 28 күн бұрын
Are the batteries LiHv? when my unit is fully charged it charges to 4.35volts
@Mino_PC_Notebook Ай бұрын
www.youtube.com/@Mino_PC_Notebook
@Kmakaot Ай бұрын
Is there any grease in the piston on version 2? I know that on version 1 everything is dry like in the desert immediately from the factory.
@johns0sk Ай бұрын
Does it need to be lubricated or any kind of maintenance? I just want mine to last long and prevent any damage caused with lack of care or maintenace needed, thank for any advices :)
@Kali-H Ай бұрын
How to fix not changing in 2
@W0ofeR Ай бұрын
thank you for review but please cut that nails :D
@RemaxAndroid Ай бұрын
many tks for the video
@BetaKseroService Ай бұрын
All clear now, Profesor! THX.
@VarunBhargavan Ай бұрын
It took me more than an year to realize you can screw off the air hose on the model 1S. I thought my unit was developing an air leak, then realized it somehow came loose. Now, it is much easier to pack in my rucksack.
Ай бұрын
I am convinced that the service life of the piston and cylinder would be drastically increased if the hose was periodically unscrewed and some silicone oil was sprayed directly into the piston. Silicone oil is beneficial to plastic, rubber and metal.
@djagoegei18 2 ай бұрын
Bro, can you compare the Xiaomi Air compressor 2 to the Bosch EasyPump ?
@szatanizmo 2 ай бұрын
those friggin fingernails........
@JOEROOT39 2 ай бұрын
Thank you Larry ❤
@mir_kaz 2 ай бұрын
Incredibly detailed review! Thank you very much.
@LegacyIvyTerascale 2 ай бұрын
shut up so we can hear them and put the mic closer
@aj.bongaros 2 ай бұрын
Are they safe to be put inside the under-seat of a motorcycle?
@dOoMnX 2 ай бұрын
So, can you easily swap the batteries for new ones?
@rhoieeichstadt8406 2 ай бұрын
I had mine but it's universal version which is great ,and i find it much better compare to my michellin tire inflator which is the battery goes low with just adding air on my tires,the only thing that i like about michellin is the design,but this xiaomi has better battery
@odin1420 2 ай бұрын
To remove the side panels, start at the end with a thin blade, once you get the end to pop up insert a screwdriver under the panel lengthwise and twist it back and forth to pop the clips free.
@jjswigger8591 3 ай бұрын
dude they aRE BARLEY DIFFERENT.. they just made a second version so sell it for 70 instead of the 30 dolar price we were gettting... capitalism at its finest puke
@TangerineTux 2 ай бұрын
Did you watch the video at all?
@jjswigger8591 3 ай бұрын
dude they aRE BARLEY DIFFERENT.. they just made a second version so sell it for 70 instead of the 30 dolar price we were gettting... capitalism at its finest puke
@alidehghani7904 3 ай бұрын
This is the best review ever!!!
@Argooh 3 ай бұрын
Jeez man thats an in-depth tear down. Nice one.
@Libralove82 3 ай бұрын
Mine won’t turn on and when it do it’s had a ⚠️ on it
@liminalsunset 3 ай бұрын
you may want to verify whether the fan rotor inside the device turns smoothly or if it may be jammed by something. If the motor doesn't turn freely it may need replacement.
@Libralove82 3 ай бұрын
Thank you
@WaschyNumber1 3 ай бұрын
The delivery strips in the box are nickel plated steel and its 10mm width x 1.03mm thick.
@sallahmontana8743 3 ай бұрын
Hello Larry how are you I change the battery of my laptop one mix 4 one netbook and when I switch one the keyboard doesn’t work can you help me
@paulomahony4416 3 ай бұрын
The music is so annoying
@Realjofa_98 3 ай бұрын
Great review!
@andresrosin1838 3 ай бұрын
You can update firmware through usb c, eliminates often problems with short circuit protection alert...
@liminalsunset 3 ай бұрын
Yes - Make sure to wait a long time, when the LED flashing color changes when doing this, as doing so before will lead to the device not booting. It is fully recoverable however it appears
@WaschyNumber1 3 ай бұрын
How does the firmware upgrade work 🤗 Does it work with android or PC and how, please? 🤔
@liminalsunset 3 ай бұрын
@@WaschyNumber1 I'm not sure about Android but I believe you have to hold down the power button for a few seconds while plugging the device into the computer, then it shows up as a USB drive that you copy the firmware into. You then have to wait a few minutes until the flashing light changes color before trying to turn it off/on again.
@WaschyNumber1 3 ай бұрын
@@liminalsunset thanks very much, wher do I get the firmware please and I hope its the official frome the manufacturer. 🤔
@liminalsunset 3 ай бұрын
@@WaschyNumber1 Yes you can go to their website and go to the Downloads section where it will be in the welding tools section.
@snhusidic 3 ай бұрын
Man, it's been a long time since I've seen a real review and not just an ad. Thanks!
@KAAnndrey 3 ай бұрын
Great work done. Respect!
@jrhames 3 ай бұрын
I’m still wondering what that blocked out button does. Have you checked?
@dave4012 3 ай бұрын
Holy mother of Xiaomi air pump teardown!!!!
@raymondrynehart 4 ай бұрын
great work and review
@nderezic 4 ай бұрын
At which voltage does the motor run?
@liminalsunset 4 ай бұрын
nominally 7.2 volts but can go up to 8.4 V when fully charged, min 6V when empty
@angelgkd 4 ай бұрын
Great video, thank you! I’ve worked on these as well and my experience is that the gears wear out and start skipping. That’s when you need to replace the head.
@rahmanabolfazli7315 4 ай бұрын
The best review i have ever seen🌹🌹
@majorbrighton 4 ай бұрын
Maybe cut your nails? Look like a woman’s hands!
@SharkStudio 4 ай бұрын
Could you please link the product what you use at 4:13 to disassemble the mini compressor? thanks!
@liminalsunset 4 ай бұрын
Go on AliExpress and search for "curved screen disassemble tool" or "stainless phone disassemble" or similar and you'll see it
@Fay7666 4 ай бұрын
Yep, also leaving a comment to boost the video. Always appreciate someone that actually goes into details in a review.
@Ohm7111 4 ай бұрын
Thanks for this amazing teardown! There is some charging bug on my unit. If I discharge the battery and charge it, it will charge to 4.2V with regular CC/CV. But if reconnect charging cable or start charging from not empty, the battery is charged to 4.4V. Weird.
@liminalsunset 4 ай бұрын
I've never discharged mine but it appears to charge to 4.4V. I assume the battery is a high voltage chemistry perhaps. It does seem to work better when charged to full.