createinspain

Пікірлер

@annamosena9196 17 сағат бұрын

problem solved!! thank you!!

@anahernandezcapsuladeltiem5225 5 күн бұрын

Thanks , good idea ❤🎉❤

@inekevandenhondel7259 6 күн бұрын

Very nice and cheerfull card . Thankyou👍😃

@createinspain 6 күн бұрын

Glad you like it!

@dot-.-com 7 күн бұрын

I ordered 5 Imagepac bags and make stamp in first try. If you want to get darker black on tracing paper, put a few drops or spray nitro thinner in a carton box and cover tracing paper. Leave for a few minutes.

@smellyrhinostudio 8 күн бұрын

Thanks! I'm having a hard time finding any info from Brother for adjusting! I assumed auto meant that it figured out how deep by first touching the mat and then touching the thickness of the material and then proceeding..right? But, as you said, my blade has cut very deep into my mats. I appreciate the help!

@bendrake1748 10 күн бұрын

While I can see why your method would work. It's slow and messy. Tape a piece of paper to the non-print side of the acetate. I put three small pieces of tape on the leading edge and it printed perfectly the very first try. It was Very much faster and no glue and mess.

@createinspain 10 күн бұрын

You are missing the point. It isn't that the acetate would not go through the printer, rather that the ink would not stay on the acetate. My method works. Neither is it particularly slow, you can prep several sheets at a time if needed, PVA glue is fast drying anyway.

@Piano1Learner 12 күн бұрын

This is GENIUS!! Quick question, does the Brother Scan n Cut cut through the plastic sign?

@createinspain 12 күн бұрын

It's pretty tough, very similar to the ones you buy for Brother machines. While possible to cut through it, you are not likely to.

@HaleemaJaved-pp5rm 13 күн бұрын

I have just started to make cup with stickers and a hairdryer has worked wonders

@ostanfor Ай бұрын

i really like this card and it saved me a lot of time.Thank you very much for the file.

@createinspain Ай бұрын

So glad you like it!

@anahernandezcapsuladeltiem5225 Ай бұрын

❤ Thank you ❤❤

@createinspain Ай бұрын

NEW LINKwww.dropbox.com/scl/fi/pxyfexj1qim504t8ix5ij/Brush-Display-Box.svg?rlkey=6faqeqkkjl4ryqk8zaesvmgye&dl=0 So sorry, I have re done the link. I have NO idea how that happened!

@vmcdesigns-nl Ай бұрын

I love this box and would love to give it a try. But when I click for the link I get a file for 3 bows. 😉

@createinspain Ай бұрын

So sorry, I have re done the link. I have NO idea how that happened!

@vmcdesigns-nl Ай бұрын

@@createinspain, you have no idea how many times I added wrong or no files at all to emails. 😊 Thank you for adding the correct file 🥰🥰🥰

@createinspain Ай бұрын

@@vmcdesigns-nl I honestly have no clue how that happened. I put the file in DB and just copied the link...The bow file was no where near it!

@vmcdesigns-nl Ай бұрын

@@createinspain Maybe youtube messed it up somehow. :😊

@createinspain Ай бұрын

@@vmcdesigns-nl More likely DB but at least it is sorted now!

@janisslowey Ай бұрын

Thank you Sandra. I’m going to reinforce the corners on the inside with a small piece of card folded in half. If you hadn’t mentioned the rice I wouldn’t have thought of it 😂.

@MaxLamont-ee5jh Ай бұрын

Brilliant! Something that actually worked for once! I've been wanting to transfer an outline onto silver sheet ready for engraving and have watched countless other peoples' videos on the subject and nothing worked. I thought that I would have to buy another printer and get special papers etc. etc. or even go on an £500 course where this subject was covered. I used a clear hobby paper glue and spread it with a roller as shown on a sheet of ordinary acetate bought in a packet from the stationers. Used a hairdryer to get it dry before putting it in my printer. Thankyou so much Sandra, it will make such a difference to my engraving being able to put complicated designs onto the metal sheets so easily and quickly.

@createinspain Ай бұрын

So glad that you found it useful! There are so many specialist items in the craft world (that cost a fortune), it's nice to be able to hack some of them.

@Hey_BK Ай бұрын

Thank you SOOO much for the construction tutorial and especially for sharing the file. I am SO excited to give this book nook a go! Thank you! Thank you! Thank you!!🤗

@createinspain Ай бұрын

Yay! I'm so excited that someone is going to try it! I had to take hours of footage and edit it down, as well as designing it along the way. I'd love to see pics of yours when it's done, you can post them on Createinspain FB group.

@sandycrawford1469 Ай бұрын

How did you make the stencil?

@createinspain Ай бұрын

I cut it on my cutter.

@nicolesalmon4583 Ай бұрын

Oh this was lovely and looks so easy to assemble. Thank you.

@createinspain Ай бұрын

It is very easy!

@lizackerman5709 Ай бұрын

These are wonderful, Sandra, thank you very much!

@createinspain Ай бұрын

Will certainly make small gifts look nice!

@juliewhitehead4432 Ай бұрын

Thank you so much. I hate the Canvas software and object to having to 'buy' the capability to print and cut (the cheek!!) This works brilliantly so thanks aga8n😊

@PolycultureArt Ай бұрын

Heya, the info I was looking for is, can you cut normal 80-100 gsm paper without setting it on fire? I want to cut out wood mainly but would also like to do some card and paper, but really dont want to buy 2 machines. So I am hoping I can get away with using it for paper/card without leaving burn marks etc. Is this possible? Cheers.

@createinspain Ай бұрын

I cut everything from copy paper to 350gsm card.

@PolycultureArt Ай бұрын

@ sick thanks for the confirmation :)

@created2bless322 Ай бұрын

Great to see this!

@createinspain Ай бұрын

Thanks! I figure a lot of people are short on inspiration for mass producing variants!

@created2bless322 Ай бұрын

@@createinspain What color printer do you use, I"m in the market for a new one. I have a good laser printer for my black and white but my color printer died when I tried to refill it with the ink, I made a huge mess!!!

@createinspain Ай бұрын

@@created2bless322 I have a smart tank HP 570 series. It's brilliant. Came with bottles of ink, really cheap to use. Must have had it 3 yrs or so by now. Never clogs, don't have to clean the heads all the time, and no, I have no affiliation to HP, bought it ourselves! I can honestly say it's the best inkjet we have had.

@created2bless322 Ай бұрын

@ thank you so much!

@inekevandenhondel7259 Ай бұрын

Beautifull cards and great idea. Thank you very much👍😀

@alidadebruyn36 Ай бұрын

Excellent video. Very informative. Thank you

@createinspain Ай бұрын

Glad you liked it!

@crafting4therestofus 2 ай бұрын

Wow 🤩🤩🤩 I aspire to one be as talented as you are!😍😍🙂

@createinspain 2 ай бұрын

Aww, thank you! It is only because I have been doing this many years!

@kriscoward5666 2 ай бұрын

My goodness!! After nearly 6 years of owning my 600 im only just finding this. Thank you thank you thank you. Are the cut files sized already? If not, what should i size them to?

@createinspain 2 ай бұрын

I no longer have a Brother but the cut flies were sized as they should be. If you need more help, go to the FB page for Brother by Jennifer Brodie - I gave the files to her group when I sold my machine and many have used them since.

@TeresaGerstacker 2 ай бұрын

This is so totally awesome! Genius!!

@kathleendifato498 2 ай бұрын

Very nice!

@garyoverman4393 2 ай бұрын

Homemade tools rock !!!

@Seamstressy 2 ай бұрын

That's so much cuter than basic boxes :D

@angieallen7363 2 ай бұрын

This is so clever! Thank you for sharing!

@angeladouel5397 2 ай бұрын

Lovely, thank you Sandra❤

@kaysharon1238 2 ай бұрын

The easiest way is to check the blackout box when you do the shadow layer

@feralferret 2 ай бұрын

Hi, do you still have and use the Silver Bullet Platinum? I think I heard you mention the Romeo/Juliet in your later youtube vids. Thanks

@createinspain 2 ай бұрын

No. It was a bit big for the space (hubby had bought it as a surprise). So yes, I now use a Juliet, also have a laser cutter and still use SCAL.

@kaysharon1238 2 ай бұрын

I don’t have the embossing kit so I assume that I would use the draw function instead of embossing but do I make sure the cut file has a fill so the tool will “fill in” the image? Thanks.

@createinspain 2 ай бұрын

This is an old video and I no longer use a Brother machine. It will not work unless you can use an embossing tool of some sort. Region embossing is not done by using a fill.

@angieallen7363 3 ай бұрын

Nice!

@createinspain 3 ай бұрын

Glad you like it!

@delsieritchie1900 3 ай бұрын

lovely box

@christinasperos160 3 ай бұрын

Can you make your distress ink recipe into sprays and instead of watercolors use acrylic. Thanks 3:39

@createinspain 3 ай бұрын

You can make sprays out of anything - IF the particulate size is small enough. If it isn't, the nozzle gets blocked. If you alter the recipe the effects won't be the same either.

@christinasperos160 3 ай бұрын

@@createinspainthank you. I’m going to experiment. I’ll let you know results.

@hodaboy1 3 ай бұрын

Michigan here.. glad you made this video.. you saved me $140.00.

@createinspain 3 ай бұрын

So glad! How did I do that?

@clairecooper370 3 ай бұрын

I am delighted to have stumbled across this, thank you so much!

@createinspain 3 ай бұрын

You're welcome!

@kaysharon1238 3 ай бұрын

Let’s see if I understand. Create a file with an outside cut line and an inside draw line. Put the stencil material on the mat and cut it. Don’t take it off the mat, just pull out the inside shapes. Put card stock over the stencil and tape it down, then draw the inside lines. Correct? What if you want to use the stencil again on another day, I assume you open the fcm file, put the stencil on the mat, scan the background. Then only draw the lines. Will the holes show up on the background scan so you can line up the fcm file to the stencil? Thanks.

@createinspain 3 ай бұрын

I no longer use a Brother cutter but that sounds about right. If you have it, you can create your file with reg marks which will ensure your design can be re used and will still line up.

@smac4565 3 ай бұрын

I’ve noticed that a lot of designs on Creative Fabrica are done by AI. Apparently AI hasn’t mastered how to do fingers. Either there aren’t enough or they are smushed together. 😂

@createinspain 3 ай бұрын

Quite possibly! I use it mainly for fonts and will probably not renew once my year is up. On the other hand it compares favourably if you would otherwise be spending a fortune on Etsy!

@AlisonTurner-d3i 3 ай бұрын

Thank you for this video, I have a cm350 machine and these mats work great. I used for sale signs 15x19 inches for hear in the USA

@createinspain 3 ай бұрын

Brilliant!

@faranume1219 3 ай бұрын

What settings did you use for cutting the paper, please?

@createinspain 3 ай бұрын

I suggest you do a material test for your particular paper. Set a speed of 100 (not much point in going faster for small items) and do power tests from 30 to 100. That should get you a result you are happy with if using printer paper.

@marthaaybar6043 3 ай бұрын

Hi! Where is the video that shows how to do the setup?

@createinspain 3 ай бұрын

Set up the machine, do you mean? You should find instructions for setting it up from Siser. It's pretty easy, unpack it, put a blade in the holder (so you can barely see it), connect to wifi if using and off you go. There are some instruction videos actually in the Leonardo software. Or do you mean setting up with SCAL?

@angieallen7363 3 ай бұрын

Thanks for showing how to do this in Procreate! Can these PNG files be imported into Brother Canvas Workspace? I want to try this to make layered cards. Again thank you for sharing your talent with us.

@createinspain 3 ай бұрын

Png files are images, just like Jpg. It's been a long while since I used a Brother and I don't remember exactly how it treated images but I think CV has a trace function? It may depend on if you have the print and cut card, so I suggest you ask on a Scan n Cut group. As long as it has a trace function, they will trace well as the background of Png files can be transparent.

@ostanfor 3 ай бұрын

It's a really lovely card. And I have learned something new today. Thank you Sandra. Could I ask you about your sparkly pens, where do you buy them? They must be really handy.

@createinspain 3 ай бұрын

They are easy to find, the brand is Sakura. I get them from Amazon. Glad you like the card!

@ostanfor 3 ай бұрын

Thank you for your help with that. I like your KZbin and find a lot of good ideas.

@vmcdesigns-nl 3 ай бұрын

This one is also very sweet. 🥰 I realy do need to start using my snc again.

@vmcdesigns-nl 3 ай бұрын

Haven't had a notification in ages so I came to check if you had new comtent. Good thing I did, your card is lovely. Perfect as a retirement card.

@createinspain 3 ай бұрын

Never rely on notifications, half the time they don't work! Glad you enjoyed the card.

@breeziedreamz 3 ай бұрын

Thank you for this. I have been wanting to do print and cut for many projects, but it is so daunting to even try to figure it out. This technique is still daunting, but at least it is an attempt that seems to work. Why they couldln't sell an add-on camera for the machine and have options in the software, I just don't know. You are the only person who has tackled this, so it is much appreciated.

@createinspain 3 ай бұрын

I think the issue stems from the fact that no one at the company thought anyone would be trying to do paper craft on these machines, beyond perhaps, intricate design cuts on plain materials. In reality, it doesn't need a camera, just a laser pointer that is accurate enough - a method of plugging numbers into the software that is remembered. I did try lightburn and could do print and cut from that because it had that facility. (I just can't justify the cost, when I also have a Siser Juliet). I do believe that eventually the software will catch up.

@Enjoylittlethingswithme 3 ай бұрын

Whwre to find the file and measurement ?

@createinspain 3 ай бұрын

Under the video

Ең жақсы KZbin

Пікірлер