Christopher Winchester

Пікірлер

@maxliu1613 Күн бұрын

Very useful！Thanks！

@Miguel-re2hv 7 күн бұрын

What about the last springs?

@gregoryjames7976 13 күн бұрын

Suggest you get a "bench block" for holding your pistol while beating on it. Only $10 to 15.

@barrygoldwater2441 19 күн бұрын

Hey, if anyone is interested I have magic beans that will grow a huge beanstalk and an elixir that will cure all your sicknesses. There is one born every minute, to be sure. Stop wasting your money on these silly additions to a mechanically beautiful weapon. CZ knows what they are doing, just run it.

@spydercomonkey 21 күн бұрын

Super helpful when polishing my firing pin block, thank you

@georgebailey5328 23 күн бұрын

Do you still have the part numbers for the pin and guide rod?

@TheRed6263 28 күн бұрын

excellent info

@just-dl Ай бұрын

Seems obvious. Thus the bed to repeat it.

@just-dl Ай бұрын

Hey did you get to do the range visit! You’re doodling two of my faves here. Would love to see them together! 🤗

@Stax-ht9md Ай бұрын

Very informative no-nonsense video! Thank you!!!!!!

@dadadadada4974 Ай бұрын

Great video… at 1:24… after 100 rounds, the INSIDE top of the slide in my new Gen 5 looks just like yours. 😬 nDLC 💩

@chrisblaney5365 Ай бұрын

I like to function test my firing pin with a laser training cartridge then take that out and run a mag of dummy rounds

@AndyThaRapperATR 2 ай бұрын

Quick and informative. Thank you!

@gabe8964 2 ай бұрын

Thanks for the video mate

@giq8747 2 ай бұрын

So does this work reliably with steel 30 round AK mags or magpul AK mags? I don't understand what you meant about the tab of the mag release part.

@julianf147 3 ай бұрын

Wanna try……but scared

@LifesaBench 3 ай бұрын

It really is very simple all the parts only go one way. Glock is a good place to start it’s like legos.

@julianf147 3 ай бұрын

@@LifesaBench I’m going to try because I want to find a red barrel but I’m not sure where to look

@LifesaBench 3 ай бұрын

Your best bet for something like that might be to have your barrel cerakoted, shouldn’t be but 85 to 100 bucks if you just drop Off the barrel

@poas000 3 ай бұрын

Thanks a lot for your video. I was replacing the slide back plate and everything fell apart. Your video helped me put it together and now I know how to reassemble.

@DavidJones-vf3ff 3 ай бұрын

Finally found a video that explains and shows everything without a bunch of BS.

@LifesaBench 3 ай бұрын

Thank you for that!

@terribletomvu37 3 ай бұрын

Are there any objective differences in switching to steel guide rod?

@LifesaBench 3 ай бұрын

Honesty I didn’t notice any change in the performance, for me it was mostly because of durability, the original guide rod is fine I just felt better about this one

@terribletomvu37 3 ай бұрын

Thanks. If they ever reduce the double action trigger pull to about 7 lbs., it would be a perfect gun. A great gun nevertheless.

@LifesaBench 4 ай бұрын

@MrKaren1971 this is were I go, cajungunworks.com/product-category/p-01/

@MrKaren1971 4 ай бұрын

hi, can i get links to spare parts

@GoDawgs678 4 ай бұрын

Where’s the video? Did you take it out to the range or not?

@Mr.Steve-O 4 ай бұрын

Got my P-01 6 months ago and I love it. I have only used 115 grain ammo so far. Has anyone shot 124 or 147 grain throughs theirs and which grain offers the best overall feel? Thx !

@ClintTorres 5 ай бұрын

If Glock were smart enough to make their grips as ergonomic as the metal-framed CZs they'd own twice the market that they currently do. They'd have it all rock-solid reliability and great ergos but they refuse to recognize and address the main criticism of their firearms. My cajunized CZs can make them amazing. Wish CZ would improve their factory firing pin roll pin though. They know it's an issue but also refuse to address it.

@wendellhatcher7011 7 ай бұрын

These things are hard to find... inplan to get one sometime this year.

@christopherhasley3986 8 ай бұрын

Thanks for the review and covering the guide rod.

@therainydayshooter2973 9 ай бұрын

CGW ss guide rod , 14 lbs recoil spring. Thank me later.

@Moss535 9 ай бұрын

My edc is a p01 omega and i did the same upgrades after i got mine. Just curious is you had done much dry firing before you replaced that roll pin? I pulled mine around 500 round mark it was still pretty good but replaced it anyway. Just curious, seems like sometimes its hit or miss with it. Great gun though, it has never let me down and i love it!

@mikethomas7138 9 ай бұрын

Can't find anyone with them is stock, why are these so hard for dealers to get

@KGBBooks 9 ай бұрын

CZ sends them in batches. Just have to be patient.

@mikethomas7138 9 ай бұрын

@@KGBBooks perhaps they are all going to ukraine for now... i'll keep watching, looks like this one is one to be patient for

@johnwhodat8135 9 ай бұрын

Try ' red rifle ' in Carson CA. I got mine from them two weeks ago.

@maybeso1547 5 ай бұрын

Order the 10rd CA compliant. It is exact same pistol. Then get the 14 or 15 rd mags. It will also accept Sp01 mags. However p01 mags will not fit the sp01.

@HamTorta6 9 ай бұрын

Who else flipped their phone upside-down?

@boogaethje 10 ай бұрын

Next pistol to add for sure. Shot a few CZ pistols and they are just comfortable and shoot well for me. Carried a g19 for awhile but for some reason the appeal of the de-cocker is hard to ignore as opposed to the Glock with one in the pipe. It’s sort of an irrational and silly mental thing but think I’d feel more comfortable carrying the CZ. Bang for the buck perhaps there’s more to the CZ.

@Alan_B_Trehern 10 ай бұрын

Nice video! I just picked one up today. Not the omega, but the regular P-01 with the NSN engraving. I’m shopping at Cajun now and I just ordered the Dawson fiber optic front and blacked out rear carry sights.

@2agunguy5 10 ай бұрын

CZs are so nice especially compaired to Glock. Love the double single action, I have had a few Cajon triggered CZs...P-01 & P-07 love them both.

@michaelmosberger1245 11 ай бұрын

The new CZ shadow two. I just got came with the polymer guide rod. I was surprised at the price point. I'm looking to get the CZ P01 for my EDC. Thanks

@michaelmosberger1245 11 ай бұрын

Can you get them from the factory with nite sites? Thanks 👍🏼

@שמואלברק-ש4ס 11 ай бұрын

🇮🇱👌❤️👍💋🇮🇱

@BishopBlast 11 ай бұрын

nice review. i enjoy CZ and Glocks as well

@andybaker1784 11 ай бұрын

I have a P01 with the Omega trigger. I replaced the plastic guide rod with a stainless one from M*Carbo.

@שמואלברק-ש4ס 11 ай бұрын

🇮🇱💋❤️👍🇺🇸

@bigb7024 11 ай бұрын

Love my P01. If you haven’t looked into it you should check out all the different tests that NATO put this pistol through.

@LifesaBench 11 ай бұрын

I have seen some info on that. It was crazy how little stoppages it had. Crazy reliable.

@HersheyRoseX 11 ай бұрын

I highly recommend you put a DPM System guiderod and spring!

@straplyfedj 5 ай бұрын

Why DPM? Other companies make good stuff too bro?

@HersheyRoseX 5 ай бұрын

@@straplyfedj DPM in particular because of the increased reliability, long durability and recoil control under rapid fire. Other companies do pretty well at some of those things but the DPM system is a system that does it all.

@gregz4249 11 ай бұрын

If they made it through my three dogs outside, that’s one bad dude , I’m leaving

@navacreates 11 ай бұрын

I just got one as a gift for Christmas and I am glad to hear good things about this gun. 😂😂

@mikethomas7138 9 ай бұрын

where did you find one, can't find any out there, all out of stock

@Duskyming160 11 ай бұрын

8k round's through my p01 with the stainless steel guide rod. You will notice one thing if you change it out. The gun will basically still perform flawless with no issue's .

@johnwhodat8135 9 ай бұрын

I bought mine recently and just replaced the plastic guide rod with a SS rod from cgw. Haven't shot the gun yet. Did you notice the difference in gun performance between the two rods?

@LifesaBench 9 ай бұрын

@johnwhodat8135 I didn’t really. Price any difference in performance, it was really just for peace of mind. It looked worn after only 200 rounds. The new one has about 1500 rounds threw it and still looks new