VP Motors

Пікірлер

@-Nobody-1 Ай бұрын

Id have to go with 1/2” since im already geared up for that since in coming from the pneumatic world.

@TokAnjangKau 22 күн бұрын

Time traveller🎉

@-Nobody-1 22 күн бұрын

@ am i?!

@TheHitDat 2 ай бұрын

I wanna see them both on the original small batteries. I have the 1/8 stubby and it will not take off my lugs on my 2016 GMC Z71 if it did mine is defective 😮

@툴밸트연구중 2 ай бұрын

kzbin.info/www/bejne/jKC7aYhojZyfjLM 한국제작품

@amoulet69 2 ай бұрын

My 2 favorites, but FXE model (or 701 Enduro) should be used for more accuracy and tire equality.

@michaeldunwoodie7717 3 ай бұрын

3:00 nice 1 dummy

@joseCalderon1976 5 ай бұрын

Awesome. The 3/8 is more practical and lighter IMHO 👍

@sanderandreasen2887 5 ай бұрын

do you use masks

@teotaraba123 6 ай бұрын

Is this real?

@aaauto 6 ай бұрын

Whats the fuel economy on highway? around 120km?

@dusanjovanovski8752 6 ай бұрын

Mine goes ~150km/h with second person much faster anytime anywhere including soft uphill.

@pavelp6179 6 ай бұрын

Thanks!

@slabosci 6 ай бұрын

siema, mam taka sama maszynę :DD moja leci 100 lekko !! LWG POZDRO

@JRT3000 7 ай бұрын

Why no body talk about which one to buy if i can afford only one 3/8 @1/2 i mean why would i choose one over the other .. Does 1/2 is faster nd put more TQ down than the 3 8 or is just a matter of size?

@vpmotors9529 7 ай бұрын

3/8" seems to hit a little harder and can be more compact due to socket length. 1/2" has way more accessories. If you can only afford one, I'd buy the 1/2", and later on maybe get a bigger 1/2" impact for tougher jobs so you can use your existing sockets.

@HighGrade_FireBlade 7 ай бұрын

Wish they would have put another LED above the anvil. Yeah I know it’s compact but they could have fit another two LEDs on the nose without increasing the form factor at all.

@mitchell3042 7 ай бұрын

Shooting blanks

@ericpetteway3841 7 ай бұрын

Seems they would be identical except one is 3/8 and the other is 1/2

@NEVETSTEVEN510 8 ай бұрын

LmFaO 🤣 low battery and he’s not full throttle! Zero 60 3 seconds on my fx 🖕🏻making us look weak…

@PowerBeni753_ 8 ай бұрын

Ez a Vattas Edition derbi senda amit a gyerek nyert még videóban is benne van @Vattas

@ramimo1000 9 ай бұрын

i search so much time this bikes together to see who is faster . honestly i thought the zero will win

@ProxyFinal 9 ай бұрын

The 1/2 has a flaw where socket can run against the housing

@hamzafakir-y9i 9 ай бұрын

amazing !! please more videos like these.

@yungdro1972 9 ай бұрын

Got all 3 stubby impacts, and I love them. The 1/4 is good for light work.

@maikolim37 20 күн бұрын

Why buy an expensive Milwaukee 1/4 impact gun when I can buy a $50 no-brand gun for light duty? I only bought Milwaukee for heavy duty chores.

@AncientGreek 10 ай бұрын

Why isn't passing the 8 thousand rpms?

@alfabethev2.074 10 ай бұрын

As useful as a russian dashcam vid.

@ВладиславСтанков-е8н 11 ай бұрын

Why 3/8 is better?

@dstill3597 Жыл бұрын

Great vid. Simple and to the point

@marshallrogers8011 Жыл бұрын

I must the only Stubby w/pin detent,all the videos they have the Hog Ring!!🤔

@jasonn2284 Жыл бұрын

I prefer 1/2” since most impact sockets are and torque wrenches are 1/2”. Plus 1/2” is meant for heavier duty even though the torque rating is the same.

@mg8718 11 ай бұрын

Yep. And if you try to use the 3/8 model with an extension it will fail. Go with the 1/2.

@maikolim37 20 күн бұрын

I weas debating this with a mechanic and he asked me; "What do you want it for?". "To change tires" I told him. He said; "Get the 1/2 impact wrench, it's heavier duty, even though a 3/8 can do it but why not have a little extra power?". I also had pre-existing set of sockets of all sizes that are all for a 1/2 wratchet, it was a no-brainer to get the 1/2 stubby gun.

@Dilbar-wj1th Жыл бұрын

Nuclar

@itsakos Жыл бұрын

Aztakurva

@beatle7809 Жыл бұрын

Yeah, this was when the launchers were bugged and explosions went thru walls and around corners etc. good times

@MorrowSind Жыл бұрын

You don't talk? I don't get why people don't talk in their videos.

@vpmotors9529 Жыл бұрын

I choose not to. But what is there to talk about? Everything is written on the screen. There is no point in reading out numbers.

@MorrowSind Жыл бұрын

@@vpmotors9529 It's just easier to listen. I just think if you're going to put yourself out there and make content, then don't be afraid to put yourself out there and be social. I ended up leaving halfway through because I got bored looking for the numbers/ information on the screen. And, I'm a reader... so, it has nothing to do with that. It's just exhausting to follow, especially in the relaxing late hours that we all want to look at online tools. Some will feel different, but some will feel the same as me. Hope this helps.

@thelos8093 Жыл бұрын

No talking is better

@killers00000007 11 ай бұрын

Maybe he's blind. Or don't know how to read. Ijs lol

@odillaurent1053 Жыл бұрын

this is the best i have seen, and i watched it a-couple times now .....

@itsmistersmoke Ай бұрын

bro i watched more than twice already, I really need this lol.

@tubingforever Жыл бұрын

Never gonna need more on an adv

@evilqtip7098 Жыл бұрын

EXCELLENT REVIEW ❤ ❤ ❤ ❤ ❤ ❤ 😂😂😂😂😂😂😂

@SJ_Killy Жыл бұрын

Some commentary would be nice

@simonfuller7331 Жыл бұрын

Hi mate from Germany. Great video. I wouldn't take much notice of some of the idiotic comments posted on here. Most of them have probably not even been on the Autobahn, For a 373cc single, that ADV goes very well and it looks stable. With only 44BHP it doesn't leave much room for error and overtaking at the top end of the range but if you have to follow a bus in the fast lane - so be it. Stay safe and keep enjoying your KTM!

@pianosfilipem Жыл бұрын

Top speed depends on wind . I could get 170 sometimes

@michaelbmw1931 8 ай бұрын

Wow thats enought

@pianosfilipem Жыл бұрын

Change the stock wind shield it's terrible

@raulgarcia528 Жыл бұрын

Exelente

@noefkie Жыл бұрын

Nice ride. I only don't understand the choice of not letting us hear the exhaust sound but a heavy breathing man lol

@donewhiskey Жыл бұрын

Microphone must have been in the helmet, to avoid wind noise. But I don't disagree with you.

@Deerector Жыл бұрын

what a great video. no talking nonsense and straight to the point with some good examples and good editing side by side.. keep up the great work bro

@maxmustermannsunny Жыл бұрын

I really dont like the commentary during the video.

@ANDY-we7mr Жыл бұрын

whitch ones the best

@gfregia Жыл бұрын

Are these the 250lb ones

@ashr2794 Жыл бұрын

What a beautiful city!

@ahkisong Жыл бұрын

So you can use the 3/8 without a adapter?

@vpmotors9529 Жыл бұрын

With 3/8" sockets, for sure!

@ahkisong Жыл бұрын

@VP Motors thank you I just bought the 3/8 stubby.. so now I'll get 3/8 Sockets.. thanks... ppl.were telling me I need a adapter. Guess if you use 1/2 inch sockets

@edgargg1669 Жыл бұрын

@@ahkisongbecuase sockets the size of lugs are usually 1/2 inch for more torque

@dahnieihl7138 Жыл бұрын

I love AK

@texassasquatch6467 Жыл бұрын

Thank you… sincerely, thank you for this video

@pianosfilipem Жыл бұрын

How was the wind?

@wendellgreenidge3362 Жыл бұрын

1200 rpm??? That’s it?

Ең жақсы KZbin

Пікірлер