I had to laugh regarding "just punch the center out" when I tried to do it thinking you must have bionic thumbs or something. I watched again and it does look like you started off by cutting it loose.
@bensaysthingsКүн бұрын
My bad, no bionic thumbs here. I'm delicate like a flower. Yes, I cut the tabs of the center with a utility knife before "punching the center out". I should've probably mentioned that.
@tadeo38542 күн бұрын
Always wear a condom
@tadeo38542 күн бұрын
Welcome to fabulous lol kid playground
@tadeo38542 күн бұрын
Lola indoor playground las vegas
@tadeo38542 күн бұрын
When go to playground you need to wear a condom
@tadeo38542 күн бұрын
Always wear a condom when inside a playground please don't forget to wear a condom.
@tadeo38542 күн бұрын
Children bastard
@tadeo38542 күн бұрын
Please don't Smoking weed indoor playground
@tadeo38542 күн бұрын
November 8 2021
@tadeo38542 күн бұрын
Tube orange green and blue slide on the cabron
@tadeo38542 күн бұрын
Bastard children playground
@tadeo38542 күн бұрын
Fuckaroo indoor playground
@tadeo38542 күн бұрын
Kangaroo indoor playground
@tadeo38542 күн бұрын
Lucky bastard indoor playground
@aleksdude2 күн бұрын
that looks pretty good in your thumbnail. Alot of hipster irvinians
@bensaysthings2 күн бұрын
Yeah, I'm an awesome photographer.
@chronixxfan87019 күн бұрын
Thanks a lot! This was very helpful
@bensaysthings5 күн бұрын
Glad it helped!
@kiwiyt542310 күн бұрын
Do I need to buy a New filter every time the Filter is finished and the 2nd Filter is done too? Please answer, thank you
@bensaysthings9 күн бұрын
The included HEPA filter can't really be cleaned for reuse. You can try but as far as I can tell it makes the filter elements more fuzzy and probably less effective. Personally I have patted them to release some dust and removed any large dust bunnies with my fingers to extend it's life, but I think the best bet is to buy a new one.
@choppaboi384416 күн бұрын
what kind of screws do i need i got mine from my job and it was missing them idk what i need can someone help me 🥲
@talanunu509718 күн бұрын
I bought this chair for my husband as an early birthday present from costco. He loves it!
@abcz110223 күн бұрын
Thanks a lot for this video. I’m having the same problem but my tab is ok. I also tried to reset the OPEN and CLOSED door positions, but LED #7 always flashes after I set the positions. The problem is still there. Do you have any suggestions on this issue?
@bensaysthings19 күн бұрын
Not seeing what the issue is exactly this is my best guess. Since the tab is okay the only thing I can think of is when you set the OPEN/CLOSED position the tab may not be in the correct location on the belt, so when you set the OPEN or CLOSE for your door the tab never makes it to the Marantec unit to trip the sensor. OR if the tab does make it all the way back the sensor in the Marantec the sensor is faulty and doesn't register the tab passing by. IF this is the case it could be a bad sensor. There's a link to the manual in the video description.
@Medical-Megan24 күн бұрын
Okay but how do you angle the bouncer
@bensaysthings19 күн бұрын
As far as I can tell the angle of the bouncer can't really be adjusted. Once you put your infant in, depending on his/her weight, the bouncer will just move to a more shallow or deeper angle.
@jaycrneckiy569926 күн бұрын
Why is it called wet&forget, yet you have to rinse it off next day
@Digitalmarketer3228 күн бұрын
Good Review but not properly explain about that Product
@samkeino6810Ай бұрын
Not accurate. ALL signature only menu items are limited to one order!
@ibnmcdeyaraiiАй бұрын
“Strong independent woman,” 😂 is that a sarcasm?! 😂🙈
@bensaysthings29 күн бұрын
Yeah, I spoke too soon in the video since I toss the phrase out every so often when I expect Pam to ask for help, but as you saw she ended up getting the part off by herself. I should've kept my trap shut. 😅
@halliefields121Ай бұрын
sooo you probably don’t know but i do have two questions. im going with a friend in a few days, my first is we’re paying separate and they’re getting the first tier and im going with the signature tier. am i allowed to share stuff on my tier with the person, or no? and 2, can i customize a roll to ask for no cucumber or something
@bensaysthings29 күн бұрын
I think you both have to be at the same tier, but it doesn't hurt to ask. Customizing a roll is do-able, just talk with your server since I didn't see the functionality to customize in the tablet you use for ordering.
@mrdeancАй бұрын
Thanks so much!!! Garage tech totally disregarded my comments about the missing position tab and proceeded to try to sell me an entirely new opener…
@bensaysthings29 күн бұрын
Glad the video helped. Hopefully you didn't have to buy a whole new system for a quick simple fix.
@fretsman68Ай бұрын
The adjustable flapper idea is great, and with the knowledge you give in this video, is good as well. BUT, don't you have to tell us how high your water level is set from your float to assure the flush is strong enough? It all works together as a team, doesn't it?
@kurtjohn1993Ай бұрын
Saw this recently on instagram and will be checking it out tomorrow night! I look forward to it!
@bensaysthingsАй бұрын
Hope you enjoy it! Check the Yelp app and jump on their waitlist since it can be a long wait.
@aliciadegregoria9465Ай бұрын
Awesome review, saved me a ton because all I needed to do was use the key to loosen it
@bensaysthingsАй бұрын
Glad it helped!
@streetninja81Ай бұрын
Looks like it would be good for radionics
@AngelOfDeath420Ай бұрын
branches break easy don't buy! WATCH OUT IF YOU HAVE A CAT!
@scratch90Ай бұрын
That's a lot of skewers reminds me of the old days.
@bensaysthingsАй бұрын
Yeah, I wish I took more footage of everything we ordered, but I was with a large group and didn't want be more obnoxious than I already am snapping up photos. Definitely worth a visit. Better and more value than most buffets IMHO.
@scratch90Ай бұрын
@@bensaysthings that was a lot of footage already. ha ha
@jkllupo3736Ай бұрын
Great job!
@bensaysthingsАй бұрын
Thanks!
Ай бұрын
Thank you for the video! It was literally a 10 minute fix!!
@bensaysthingsАй бұрын
Glad the video helped!
@leatski7782Ай бұрын
Thank you so much, very informative!
@bensaysthingsАй бұрын
Glad it was helpful!
@Grip-n-Rip-ItАй бұрын
Looks sad
@bensaysthingsАй бұрын
Sad, but not Charlie Brown Christmas Tree sad (pre-Snoopy/Woodstock upgrade).
@pa77522 ай бұрын
Any tips if the middle section lights go out and stop working ? I they are burnt out
@bensaysthings2 ай бұрын
If the middle section lights are out, I'm not really sure what you could do since it seems like it might be a wiring issue. The tree does include a few replacement bulbs and the only thing I could think of is to look if there are any obviously blown/burnt bulbs and try replacing them.
@brienmuller2 ай бұрын
Watching you do the replacement with no stress encouraged me to do the same. However, I have two suggestions. First, the directions that came with my Kohler "pressure balancing valve" says to lubricate the new O-rings. You don't do that in the video but maybe the directions have changed in the last 4 years since you posted the video? I bought a tiny tube of silicone plumbing lubricant on Amazon for low $$ and a tiny dab goes a long way. Second, there's a tab inside the valve body and a matching cutout on the top of the balancing valve. You didn't mention that although I can see the cutout on your new part. It was a little tricky for me to match up the notch and tab but it would be extremely critical for proper alignment. So, a couple of additional tips but overall a very good video that helped me save big $$ for a plumber.
@bensaysthings2 ай бұрын
I agree, that putting some silicone grease on the o-ring is usually a good idea to extend its life. I don't remember if the directions said to do that or not. Awesome that you tackled the repair on your own. Thanks for the feedback!
@CipherAes2562 ай бұрын
looks like nothing but baguette. very little meats and no REAL pate!!
@annascuckova2 ай бұрын
thank u!
@bensaysthings2 ай бұрын
You're welcome!
@phuctran23962 ай бұрын
So many thanks you and your video, I confirmed, I fixed my garage door with the same problem you were mentioned. Work well with MARANTEC M4500 too. Today 11/10/2024 . After replacement tab for limit open or close sensor. My garage door working well. Again, so many thanks for your sharing. ❤👍 Spend time around 30 minutes. And parts $11.99 with shipping included. 👍
@bensaysthings2 ай бұрын
That's awesome! Glad the video helped and you didn't need to call a technician. My own personal bad experiences with repairmen are that they are usually salesmen first. More often than not they also only know how to replace the entire system and not really how to repair anything.
@fluttershyplays88932 ай бұрын
My mom had found 1 video that kept skipping steps, and we were stuck on one step and you helped us with that and help finish it 🎉
@bensaysthings2 ай бұрын
That's awesome! Glad the video helped!
@lindastark57982 ай бұрын
Delish.
@bensaysthings2 ай бұрын
I agree
@bennychan723able2 ай бұрын
so far no issue with Kirkland (size 1)
@bensaysthings2 ай бұрын
We're using size 3 and 4 for our second kid and they're working fine also.
@mail2bijoy2 ай бұрын
Thank you . That worked
@bensaysthings2 ай бұрын
You're welcome!
@allyoooop19842 ай бұрын
Boom took less than 5 minutes! Thank youuu
@bensaysthings2 ай бұрын
Glad the video helped!
@Acein1412 ай бұрын
Just bought this and the cups aren't sealed?
@bensaysthings2 ай бұрын
The individual cups aren't sealed but packaged with a cap that snaps. All the cups are sealed in the plastic container.
@piseyvoen30552 ай бұрын
Good job.
@bensaysthings2 ай бұрын
Thanks!
@carolknepp57913 ай бұрын
Thanks for the assembly demo. Ours came w/o instructions.