Do you have kits for manuals tacomas? Third gen, we heard that there is a difference between auto and manual on the transmission /transfer case plates.
@VX_40442 ай бұрын
can i get that model?
@chrisc55743 ай бұрын
What is with this song and yputube videos
@user-gx6wi6xc5i3 ай бұрын
Why don’t you make the video go even faster?
@aliabuyousef34264 ай бұрын
🦾👍
@sut29105 ай бұрын
The current kit comes with 4 pocket washers 4 lock washers and 17mm bolts. The pocket washers do not have enough clearance for a 17mm socket to fit around the bolt head and fully tighten the bolt. If bolts had a 15mm head they would work fine. I had to add a flat washer and delete the pocket washers to be able to tighten the bolts at front. The rear came with a spacer plate for transfer case skid and spacer for hole in gearbox skid but the pocket washer won’t seat when using spacer so I substituted a large flat washer and did not use pocket washer. I was able to use one of the pocket washers by putting an additional thick flat washer on the bolt.
@PinballRehab2 ай бұрын
I contacted them with the same complaint and they told me no one else had complained about this. Also, why the hell did they run the video at 2X, makes it impossible to keep up with.
@JoshuaDavies045 ай бұрын
Just finished the full set for my 7-seater GCL Summit. I can confidently say everything fits like a charm! Thanks for these instructions!
@EZapar6 ай бұрын
This video shows having to cut the plastic skid plate. What if you have the steel one that comes on the Badlands and Wildtrak?
@traianpetrascu7 ай бұрын
salutare !! oare in ce program este facuta prezentarea la "Truck Rear Bumpers | Asfir 4X4"
@TATARBaraCudaPM6368 ай бұрын
Very goog❤❤
@velislavnikolov9099 ай бұрын
Hi, Very nica plate! Can you send me the dimentions or link from where to buy? Thanks in advance.
@oscarmunoz285110 ай бұрын
I need one for Tacoma 2004 3.4 engine how much
@MarcelBeaujeu10 ай бұрын
No rust protection after drilling , you work like pigs .
@orestesraul34511 ай бұрын
Hi any skid plate for my Ford expedition limited 2023?
@asfirltd10 ай бұрын
Not yet, but make sure to stay tuned :)
@timmurphy983411 ай бұрын
Simple to mount. The ones I got did not have the ASFIR logo cutouts in the bottom. Which is fine. Wish they did have a drain hole but they are narrow and don’t catch a lot of stuff
@asfirltd10 ай бұрын
Thanks for the feedback, it is much appreciated! We're always learning and improving, so we update our skid plates accordingly
@outlawedmedia4336 Жыл бұрын
Why everyone does a permanent winch install? I'm looking for a removable winch mount. Similar to a rear hitch mounted winch but for front.
@asfirltd Жыл бұрын
For Ford Bronco this is tricky cause of all the components it has on the Front Bumper. for other vehicles we do have hidden winch mounts. Make sure to follow us and stay tuned for future updates and releases :)
@GroovyGeek Жыл бұрын
That logo in the middle of the slide area is a real "interesting" design choice, as it accomplishes nothing other than providing a catch point for rocks. It would have been far better to leave it solid, would have lowered the fab costs too.
@asfirltd Жыл бұрын
Good point but they are mostly designed to ensure easy removal of pebbles, dirt, or water that may get caught between the skid and the vehicle while offroading. There some plates where we don't put logo at all, when it's not benefit. But thank you for the feedback! ASFIR always strives to learn and improve, so this is very appreciated :)
@timmurphy9834 Жыл бұрын
Was a bit tricker than expected. Had to loosen the OEM transfer case skid bolts to get everything to fit and thread on. But I totally understand why this brace is needed! Great quality. This video was a big help. Stupid me didn’t realize the OEM upper bolt is welded on and didn’t need to be removed.
@asfirltd Жыл бұрын
Glad to hear that this video helped you with the installation process :)
@timmurphy9834 Жыл бұрын
Does this work with the stock Ford transfer case skid on Badlands ?
@asfirltd Жыл бұрын
Yes absolutely!
@timmurphy9834 Жыл бұрын
@@asfirltd cool I just bought one plus the transfer case skid support brace. Free shipping! Thx.
@aliabuyousef3426 Жыл бұрын
👍👍
@KHAN30.Customs Жыл бұрын
Great Product and nice setup!!! Integrate a front Recovery points?
@asfirltd Жыл бұрын
Currently we don't have Recovery points for Rexton, but maybe in the near future ;) so make sure to follow us & stay tuned
@mygreenz1000 Жыл бұрын
Do u offer plates for a yamaha banshee? Cool video
@asfirltd Жыл бұрын
Unfortunately no, hope we can help better next time
@skoVBA2 Жыл бұрын
What protects the bolts on a "skid" plate? Seems like them protruding is just asking to have an issue
@asfirltd Жыл бұрын
This video is a bit outdated. We usually provide pocket washers where there's a risk of bolt shear.
@calabao31 Жыл бұрын
bravo,super travail! On le reconnais plus cet Hilux. Le pare choc avant est vraiment réussit .( vous avez pas les plans par hasard ? )
@asfirltd Жыл бұрын
Vous pouvez entrer en contact avec notre distributeur en France, ils vous aideront www.asfir.eu/
@JohnBowen-fe3jb Жыл бұрын
Thanks! This will help with my install.
@asfirltd Жыл бұрын
Glad it helped
@PANAMAPRIVATETOURS2 жыл бұрын
where can I download the design so I can cut i
@asfirltd2 жыл бұрын
Unfortunately you only can purchase this skid plate from our site : www.asfir.com/front-skid-plate-508057.html
@colorcodedcody2 жыл бұрын
I am getting a 2022 Subaru Forester Wilderness, comes with an aluminum skid plate from factory but I want a stronger one. Is this skid plate steel or also aluminum? What material should I need to get adequate protection for off roading?
@asfirltd2 жыл бұрын
Hey Cody, our skid plates are made of 1\4" aluminum (5052) which is very durable and super light-weight. Check our new article that talks all about Steel Vs Aluminum : www.asfir.com/blog/post/steel-vs-aluminum/
@mwal31452 жыл бұрын
Hey guys, just installed mine on a 22 Wildtrak, super easy, all parts fit nice, thank you!
@asfirltd2 жыл бұрын
Glad to hear that! Ride safe :)
@arlexis522 жыл бұрын
Thanks for this just got mine a couple weeks ago and my gas tank today!
@dylanlam64302 жыл бұрын
My remote nuts are straight and yours are 90 degree angle
@dylanlam64302 жыл бұрын
I spent 1800$ and I get such half ass instructions. Come on guys.
@asfirltd2 жыл бұрын
Hi Dylan, we're sorry to hear the tutorial video wasn't helpful enough. We would love to learn how we can improve it. Please share any relevant feedback with us at [email protected] Best, ASFIR team
@dylanlam64302 жыл бұрын
Theres only one middle bracket two so I’m sure you fucked up this video too
@dylanlam64302 жыл бұрын
Stupid, you used 6 30 hex but only included 4
@paulsmith-ld8xl2 жыл бұрын
Need in black color
@asfirltd2 жыл бұрын
Hey Paul, Sorry but only available in red color for now.
@ray83802 жыл бұрын
Would this protect me from someone drilling a hole to my gas tank
@asfirltd2 жыл бұрын
Our skid plates have service and ventilation holes, as it especially developed for off-roading, so it won't stop anyone from drilling a hole in your gas tank.
I love this, hope you able to show a video with that cool hidden winch system for the Forester.
@asfirltd2 жыл бұрын
That's the plan!
@shtotty2 жыл бұрын
Does it go over the existing skid plate on a rubicon? If yes then what's the purpose?
@asfirltd2 жыл бұрын
Yes, it does go over the stock skid to achieve much more protection and coverage for this valuable component (Transfer Case), and also it has inclines on the sides which help slide over obstacles such as rocks.
Fits on 2.0L / 2.4L petrol engines, and 2.2L diesel engines
@11068433 жыл бұрын
Is the installation roughly the same for the xt forester?
@asfirltd2 жыл бұрын
Not exactly the same, but pretty much similar....When achieving the package you'll be supplied with a detailed bill of materials drawing and a sketch to help as a mounting guide.
@crbourret3 жыл бұрын
One feature that would be nice to have on the 4Runner, FJ version is an access plate to get to the oil filter housing like there is for the oil drain pan bolt. So you don't have to drop the whole skid plate when you do an oil change. Just a suggestion. Great products!
@asfirltd2 жыл бұрын
That's why our skids are easy to install/remove ;)
@clikuk37193 жыл бұрын
11 years on and no comment for a good video hear is your first one take care