What are the chances that you could make a billet connecting rod for the 79cc?
@operationrestore330827 күн бұрын
What is the cam specs?
@archiefordham5541Ай бұрын
You still grinding 79/98cc cams?
@petedudeАй бұрын
How long are the 1/4 20 bolts that you used?
@MaryBrutАй бұрын
Hi. Do you build just a rolling chassis for the 41willys?
@agkracing140Ай бұрын
We can build a rolling chassis however we can't guarantee your body will fit unless we have the body at our shop.
@MaryBrutАй бұрын
Hi do you sell just a rolling chassis? No motor or body
@agkracing140Ай бұрын
Selling a rolling chassis is possible however we can't guarantee how your body will fit. Due to the variance in the shape and size of the bodies being produced, we try to avoid selling them without the body.
@racksofishАй бұрын
Why don’t you sell the carburetors anymore?? I really need one because my bike has been sitting and needs a new carb but i am having trouble with the cheap Amazon ones. The governor is already off but damn i wish you still sold these carbs bored out!
@agkracing140Ай бұрын
We have been focusing more on complete go kart builds. We can still rework your carb if you'd like. Send us an email at [email protected] where we can give you pricing and let you know where to send it.
@racksofishАй бұрын
@@agkracing140 i will definitely have to inquire about that! Currently my original carb is gunked up and my mini bike won’t start up so i have to clean it through before sending it to you guys!
@racksofishАй бұрын
I just got done taking the governor out of my 79cc and rebuild the throttle and everything with your guys’ throttle linkage kit. I have been rebuilding a 79cc mini bike setup that’s on a schwin chopper bike. It’s been sitting for 8 years all apart and i have been rebuilding it
@mbrrideitlikeyoustoleit8436Ай бұрын
What’s been done to the 212cc or is it built or stock internals?
@agkracing140Ай бұрын
We kept it mostly stock for the class we raced in. They allowed a 19mm carb, header, governor removal and I think heavier valve springs. It's a simple, fast and reliable combo.
@mbrrideitlikeyoustoleit8436Ай бұрын
@@agkracing140 I think the rules kinda suck I can’t race with a 30 series torque converter and I can’t race my built 212cc cliffy says.
@hudsonredmond56012 ай бұрын
this is awesome i live in santa barbara and i have a talaria
@RowansTalkShow2 ай бұрын
Whered you get the cam
@mikesbarn18583 ай бұрын
Heck yeah. Really awesome. Bravo.
@Cyphers.3 ай бұрын
Why u so underrated that’s so cool
@agkracing1403 ай бұрын
Thank you so much!
@adriansandu25833 ай бұрын
Awesome!
@LRNLoweRacingNetwork3 ай бұрын
hell yeah thats sick!
@-allblck1gunman-2863 ай бұрын
Where can I get a manifold? That’ll fit a 79
@rezenclowd33 ай бұрын
Please stay off these trails, you ruin them for mountain bikers and hikers. Ride Ortega OVH in ojai instead.
@stevebouxsein46913 ай бұрын
What size drive chain
@agkracing1403 ай бұрын
We use #35 chain. It's light weight and plenty strong.
@IDK_967763 ай бұрын
hey man i have a 79cc stock motovox mbx10 engine with a new 19mm carb and a new exhaust and i was wondering if it was as strong at the predator one my engine is brand new only has like 20 miles
@agkracing1403 ай бұрын
We can make a lot more power with the Predator engine.
@joseperez-dj9uw3 ай бұрын
Where how much why even ask how much just take the money
@patrickbrady99194 ай бұрын
Hmm I usually eyeball it. Lol
@veteransowhat56694 ай бұрын
Can you tell me what is the throttle grip. Both grips with the "kits," broke because they are plastic.
@ProDigit804 ай бұрын
I had a similar issue, turns out it was a rubber grommet inside the AF screw that was missing that threw off the mixture.
@masonreppeto8824 ай бұрын
Bought a chinese made gas bike kit and installed it. The only problem is that it came with a bad voltage regulator lol. might just go get a brand new throttle stick and carb now............
@marcchaffee77514 ай бұрын
The double sprocket clutches are almost non available .
@WUTANG_KING_1.24.795 ай бұрын
She sounds f****** mean. good job on that custom pipe work.
@donaldmarch94515 ай бұрын
How can I find this kit
@enriquetorres3605 ай бұрын
You can alao punch out the governor gear and just use a self tap nut ......no need to remove crank
@Say101985 ай бұрын
I really wanna get a gas motor on my Super73 S2.
@Littleevil99755 ай бұрын
Nice build bro thanks for sharing it
@CanIgetSuscriberswithnov-ci3dw6 ай бұрын
This should get more views
@algagliano55676 ай бұрын
Will that carburetor manifold fit a 2 or 3hp Briggs
@theupscriber656 ай бұрын
No offense, but there was really stupid design and fab here. It's obvious no one involved has any engineering education or experience. Garbich
@kegancovey21696 ай бұрын
Cable too short now, I can’t twist more than 1/4 now
@agkracing1406 ай бұрын
If the cable is too short you can cut back some of the outer housing which will allow more cable to stick out.
@angenicaaugust32116 ай бұрын
What do I need to add when I buy a cam from you? Do I need to put bigger springs to?
@agkracing1406 ай бұрын
A set of 22lb valve springs (p/n 14212) will complement our cam. The 19mm carb (p/n 10590) would be great as well. Add some compression and you'll have a strong running 79cc Predator!
@angenicaaugust32116 ай бұрын
What is your contact info so I can call you
@MySlutmuffin16 ай бұрын
Are you running stock controllers, motor, battery?
@agkracing1406 ай бұрын
Yep
@MrLopez-lm4jk6 ай бұрын
Alot of moving parts but very good quality work .. also take my advice u can use metal skateboard bearings alone as a chain tensioner sprocket substitute works like a miracle .. my lil secret
@spongeimperium1267 ай бұрын
Here's what I wanna know, why is the Honda Gxh50 $500? And the GX50 just $150?
@coopersharp29217 ай бұрын
I want to build one soo bad
@Dylan-gy9ud7 ай бұрын
We’re did you get you flywheel for the 79cc and cam want to make sure getting right upgrades want to turn mine into racing motor
@agkracing1407 ай бұрын
the parts come from www.affordablegokarts.com
@montchellojohnson19277 ай бұрын
@agkRacing140 do your 79cc parts fit a 97cc Baja viper doodlebug it's my everyday rider road and all I need it a lot faster than what it is
@agkracing1407 ай бұрын
The 79cc Predator parts do not interchange with the stock 97cc Doodlebug engine. A lot of our customers swap out that stock engine for the Predator.
@JacobWalker-v9d7 ай бұрын
Me and my brother just finished building a 212 1970s stingray mini chopper it is gear for 80mph bone stock i was wondering wear u guy race at would love to see more video s love theses type of bikes good on gas and fun as heck
@ArthronOfFir37 ай бұрын
Possible to use a pz22 walbro carb?
@Aletta_Fox7 ай бұрын
10/10 well done
@HotrodKakowski8 ай бұрын
❤😂
@benduncan39308 ай бұрын
I can’t hit like because you are at 55 But I like…!
@jeffjackson86868 ай бұрын
When i did this on my car i just used a wooden block and a hammer to knock the honeycomb from inside the pipe, did you try that?
@jamiegallacher58968 ай бұрын
Did anything happen to the motor or controller 🤔 have you opened them 2 find out 😅
@agkracing1408 ай бұрын
The bikes were washed with a hose, soap and water after the ride. Everything is working as it should. No issues.
@adanmoreno62438 ай бұрын
I guess that's it for testing back to the drawing board 😂
@OU812NVME8 ай бұрын
I told all you e-bikers you're going to go back to the old days of "Mini Bikes" lol