@@greasygearsgarage1730 the video is linked to the main video. If you look at the bottom under the Chanel image is a small > Sybil with the name of the video. it says the name of the video that’s how shorts work. Like a mini advert. or subscribe it’s free. Thanks
@@user-zc2vn3tt8v they are already installed, I removed from that seat though to sell on. If you liked the videos subscribe and 👍🏽 thanks
@jonathanthorpe165324 күн бұрын
Hi, I am just building my friends Fiat Uno Turbo. It came to me as a box of bits. I’m not sure of where the wiring harness should run. Is it in the passenger foot well or does it go inside of the sill?
@philbuildsautos73123 күн бұрын
@@jonathanthorpe1653 the rear section for the rear end and fuel go along the passenger sill under the carpet. Make sure you 👍🏽 & subscribe 😉
@jonathanthorpe165322 күн бұрын
@@philbuildsautos731 nice one thank you for the information. I’ve watched many of your videos and they have been very informative. Its my friends car it was originally on a J plate. However it was very rotten so he bought a Uno start 1.0 as the donor. I’ve always liked Fiat so it will be an enjoyable project. And I promise I will subscribe. Many thanks, Jonny.
@denttrails5182Ай бұрын
Honestly still a BMW bro 😂
@tristanjamesneville9974Ай бұрын
sir\madam u need a reg to drive please add one before driving thank u
@vMaxHeadroomАй бұрын
I have one in exactly the same colour and it is a fantastic car! Just such a good drive and the interior is just a step above....fingers crossed you get this done without any issues!
@philbuildsautos731Ай бұрын
@@vMaxHeadroom stay tuned you’ll soon find out 😉
@JRoss-t8m2 ай бұрын
Fiat, Fix It Again Tomorrow.
@philbuildsautos7312 ай бұрын
@@JRoss-t8m not this one, this is the cars 1st ever weld, wax oiled from new by previous owner. Now as for a particular other Uno I have, you’d be bang on 😂
@johnmartin81642 ай бұрын
Hi I have a suspected dodgy passenger side switch, same car it goes up and down from the drivers side but only goes down on the passenger side, how do I go about trying to clean the terminals? Thanks
@philbuildsautos7312 ай бұрын
I briefly mention it in the video, If you look how I take it apart, I mention the little delicate gold leavers inside, you clean them carefully, I chose to buy new as it was cheap and I broke a leaver inside as they go brittle if to corroded.
@suavo22523 ай бұрын
Nice purchase Phil, you'll ave it going smoothly r kid... 👌✌️
@rayj5993 ай бұрын
😎
@seunabiodun29183 ай бұрын
Good piece bro
@philbuildsautos7313 ай бұрын
@@seunabiodun2918 thanks Bro ❤️
@Renault5Rebuild3 ай бұрын
Enjoyed the video! Also trying to get the numbers up on our content. Keep the grind going 💪
@Renault5Rebuild3 ай бұрын
Are you building a Renault 5 or selling the parts? Interested either way. Also interested in the cams!
@thatdudeinorange52694 ай бұрын
Mk1 is the one to have as its more streamlined 😂
@יוסירוזנפלד-ס2ו4 ай бұрын
You need a computer streering wheel at the car. If not it will not work.
@philbuildsautos7314 ай бұрын
This works perfectly fine, whats a computer steering wheel? Do you mean the multifunction options? That I don't need, this is just to upgrade for a more fresh modern look, If the cable and coding applied then it would work if you wanted that option.
@whos-your-mate5 ай бұрын
The scene isn't what it used to be 😥
@garethtrevor1225 ай бұрын
All the old Kevin's there from back in the day!
@WillMayall-hg8go5 ай бұрын
Don't call people names because they have a passion for cars u low life its people like u name calling that's causes mental heath etc grow up
@popmantube5 ай бұрын
The show was at Stafford, Not Stoke on Trent.
@lucianocerrella15535 ай бұрын
Are you gonna restaurate the rare uno carte blanche 3 door?
@philbuildsautos7315 ай бұрын
@@lucianocerrella1553 restore is that? I’d so yes I’ll be finishing but have some family matters to sort out but hike fully soon. Stay tuned 👍🏽
@frankrobyn-fuhrmeister77745 ай бұрын
Thak you! Needed that. Have to mirror it for my continental Version ;) Hard to find spareparts.
@lucianocerrella15535 ай бұрын
Yes
@iancritcher53416 ай бұрын
Nice vid well done mate
@ДмитрийТихомиров-ж3щ6 ай бұрын
А резинку???)
@philbuildsautos7315 ай бұрын
That information will be in the video. Well spotted 👍🏽
@garylatto41917 ай бұрын
Nice job with great result 👏
@philbuildsautos7317 ай бұрын
Thank you 🙏🏽
@kanethompson41447 ай бұрын
Crank sensor
@philbuildsautos7317 ай бұрын
I tried a brand new crank sensor yesterday. No different. It’s the key no longer communicating with the ecm/ecu
@philbuildsautos7317 ай бұрын
Yes 😊
@sebi61178 ай бұрын
only as a tip. there is self-adhesive felt! it sticks very strongly and is easy to process
@philbuildsautos7318 ай бұрын
The paint used was IMPA 1k straight from the tin into the gun with a little thinners.
@vasilkerman3959 ай бұрын
ФИАТ УНО ПРЕКРАСНЫЙ АВТО У МЕНЯ ТАКО ЖН😅
@suavo225210 ай бұрын
You've stolen it.😉
@philbuildsautos73110 ай бұрын
😅
@gazjonze10 ай бұрын
Did you sell it?
@philbuildsautos73110 ай бұрын
No mate, I haven't finished it yet, it will be going on Car and classic.com or maybe raffled as I have had a raffle company reach out to sponsor and raffle any classics I have for sale. See what happens as It will be ready soon enough.
@gazjonze10 ай бұрын
I don’t suppose the registration number ends in LCS?
@philbuildsautos73110 ай бұрын
No mate.
@janeharrison746010 ай бұрын
Hello matey nice engine matey whoever likes the video win one million iPhone 15
@suavo225211 ай бұрын
Made me day seeing this Phil, nostalgic motor been saved... top one 🫡. Never knew 5's went to 95/N, thought last produced were the Raiders (one've all-time fav's back in 92/L plate. All the best movin forward r kid... ✌️
@philbuildsautos73111 ай бұрын
Nice 1 mate 😀
@petrolhead9914 Жыл бұрын
does it matter if you put a petrol car exhaust on a diesel car?
@philbuildsautos731 Жыл бұрын
Hi mate, No, The exhaust I used was off a petrol and my car was a diesel. I used the M135 and welded a section of an RS6.
@markyruss Жыл бұрын
Fuck me lad, you slide a the driver down the top air vents and twist so it pops the 3 clips at the top !!!!
@BaileygaskellGaskell Жыл бұрын
I am Assuming you do know rocket ships are not road legal
@Beautifultruthofficial Жыл бұрын
gordini replica
@robbie7298 Жыл бұрын
If you remove that your get an airbag light on
@philbuildsautos731 Жыл бұрын
The video shows you how Not to get the airbag light on?
@s1_vbe Жыл бұрын
Did u reslove this as i have the same issue but as soon as u try to drive away the same code pops up. P0721 code error
@philbuildsautos731 Жыл бұрын
Did you not watch the video? I am showing you exactly How I resolved it. I have done this twice now so this is a good and proper solution ? you need to have a watch and a subscribe would be appreciated. Thanks
@s1_vbe Жыл бұрын
@philbuildsautos731 yeah I watched it and the first video u had no power then the second video u only went forward 1 meter and not for a proper drive. Good luck ok ur future videos
@MobinKhan017 Жыл бұрын
I will monetize your KZbin channel organically by increasing views and subscribers.
@stefanstefanski3201 Жыл бұрын
Thanks!!! I'm Going to buy new one (no end nc) 2.4d aab 1996 year. Regards!!!
@philbuildsautos731 Жыл бұрын
Let me know how you get on :)
@WhittneyMichel-yp5fe Жыл бұрын
Oi
@WhittneyMichel-yp5fe Жыл бұрын
Qual a cor dos fios que estao nos sensores?
@philbuildsautos731 Жыл бұрын
O interruptor superior cinza tem um fio amarelo, o interruptor azul inferior tem um fio preto ou azul. Google tradutor só para você ;)
@MrTomasMaliauka Жыл бұрын
Presure switch 0,9 Bar, NO (normal open) - the grey one. Presure switch 0,25 Bar, NC (normal closed) - the dark blue one.
@johnquinn5903 Жыл бұрын
Hi Mate just got on to you via Google spot on video share the knowledge love it 👍🏻 going to give it a go just got an order caravelle looks dated and was looking if you could even swap it for a newer wheel I can’t cope with looking at the order wheel 😂 I’ve got a T6 aswell just let’s it down on my order one Do you no of a head unit what can work in a t5 with the T6.1 wheel it’s a 56reg so cracking on I’m just wanting to make it abit more tricked up with sheering controls etc Any help would be much appreciated
@philbuildsautos731 Жыл бұрын
Course you can, If it fits, you can do it, take your time and safety 1st.
@suavo2252 Жыл бұрын
Good progress Phil !
@philbuildsautos731 Жыл бұрын
Thank you very much :)
@nohamfanks7449 Жыл бұрын
Yes
@japsijapsi1195 Жыл бұрын
Yes. Lovely car
@nikrohrich7762 жыл бұрын
unfortunately bad focus on important parts
@philbuildsautos7312 жыл бұрын
What parts that then? rather than be negative, ask a positive question if you need help.
@xxxkluskaxxx2 жыл бұрын
This is much easier option m.kzbin.info/www/bejne/o6Sal6mAhL6hhq8