Пікірлер
@zacharyhawley1693 27 күн бұрын
❤
@corycarpenter1094 Ай бұрын
Thanks
@doitstepbystep3376 Ай бұрын
Glad this helped you!
@maureenneven3786 Ай бұрын
Thank you for this labor of love and your witness to The Birth of A King 👑!
@doitstepbystep3376 Ай бұрын
You are welcome!
@chesterchan2612 2 ай бұрын
How many layers of stains did you use to get the color in 4:20?
@doitstepbystep3376 2 ай бұрын
@@chesterchan2612 thanks for the question. My daughter liked the color of four coats of stain with 2 coats of clear satin urethane, so that's what I did. I must say, after some time, the wood did get a bit darker. I would probably just do 2 coats if I desired a lighter color like @ 4:20.
@saulkravitz 4 ай бұрын
Are all fixed fins simply glued on? What different types of glues are needed for different types of boards?
@doitstepbystep3376 4 ай бұрын
@@saulkravitz I want to say fixed fins are glued on, but there maybe some manufacturers that have molded fins? Review the video starting at 2:08. I talk about identifying the types of materials, hypalon and pvc, for your iSUP. Then you can get the correct adhesive for your iSUP. Hope that helps!
@1898PR 5 ай бұрын
Thanks! Exellent explanation. Now I have no excuse like other folks here to build one for my wedding in October.🤷🏽♂️
@doitstepbystep3376 5 ай бұрын
@@1898PR you're welcome! Good luck on your project, and congratulations on the wedding!
@1898PR 5 ай бұрын
Thank you!
@caraleemcgraw3275 5 ай бұрын
What length screws did you use?
@doitstepbystep3376 5 ай бұрын
@@caraleemcgraw3275 (zinc coated (indoor use) 2-1/2” Kreg pocket hole screws
@williamcoleiv3651 5 ай бұрын
This is exactly what Ive been looking for! Getting married in a couple months and Im building this this weekend!
@doitstepbystep3376 5 ай бұрын
@@williamcoleiv3651 Congratulations! Good luck on the build! Just mind your cut lines so you can make strong, tight fitting joints. 👍
@RomanKundys 5 ай бұрын
Great video, thanks for sharing. i have question though why are you using vinil cement for PVC material? Thanks
@doitstepbystep3376 5 ай бұрын
@@RomanKundys my iSUP is constructed with polyvinyl chloride (PVC) fabric. And the adhesive I used (HH-66) is one of the better choices for this type of material and project. I hope this helps!
@shindenn2390 5 ай бұрын
Awesome tip! Thanks!
@doitstepbystep3376 5 ай бұрын
@@shindenn2390 you are welcome 👍
@jaythewrapper239 7 ай бұрын
Does it work with a rubber hose
@doitstepbystep3376 7 ай бұрын
Unless your rubber hose is reinforced, I think it would be difficult to use this technique on a rubber hose. The vinyl hose I used was reinforced and ridge enough to not flop over when I started to push the fitting into it.
@jmsboggio 8 ай бұрын
Hi! I found your video because I'm attempting to make a hexagonal trellis very much like this. Can I use these same joints with 4x4s?
@doitstepbystep3376 8 ай бұрын
I think it is possible with the right tools and skills. The difficult part, at least for me, would be getting a deep enough cut with the saw(s). My circular saw, and jigsaw would not be able to handle nearly 4" deep cut. A hand saw could do it, but require skill and patiences to get "square" cuts. Good luck with your project!!
@doitstepbystep3376 8 ай бұрын
Also, before you drop $$ on a lot of lumber, find some scrap pieces of 4x4 to practice on.👍
@akmaldawson5187 8 ай бұрын
❤
@christopherrubio8047 9 ай бұрын
Absolutely genius!
@doitstepbystep3376 9 ай бұрын
Thank you!
@ulfgj 9 ай бұрын
now... hoe do we get a bigger hose to fit INSIDE. a smallet hole. i.e. shrink the hose a bit.
@doitstepbystep3376 9 ай бұрын
In that scenario, true hose adapter is probably the best solution.
@angelarivenbark5070 9 ай бұрын
Thank you for the detailed tutorial. I will be making this as an arbor for my roses. I look forward to more of your videos.
@doitstepbystep3376 9 ай бұрын
You are welcome! Hope all goes well 👍
@richardjohnson4696 11 ай бұрын
Why not just buy a decent board from the get go? This is just putting lipstick on a pig.
@JohnBinkley2112 Жыл бұрын
Outstanding!
@doitstepbystep3376 Жыл бұрын
Thanks brother!
@CaseyJamesOrr Жыл бұрын
This is amazing. Happy to see this.
@doitstepbystep3376 Жыл бұрын
Thank you for your kind words. I'm glad you enjoyed the results of the effort that went into the show!
@coolguymatt Жыл бұрын
Did you sequence this yourself or purchased it?
@doitstepbystep3376 Жыл бұрын
I sequenced all the shows because I have zero budget to buy sequences 😂😅
@EAPforever Жыл бұрын
Love it.great ideas
@doitstepbystep3376 Жыл бұрын
Thank you! Glad you enjoyed it.
@mitchellwestford9312 Жыл бұрын
Awesome job and thank you keep good work up 💞💞💞
@doitstepbystep3376 Жыл бұрын
Thank you! And I'll do my best 😀
@mitchellwestford9312 Жыл бұрын
@@doitstepbystep3376 Merry Christmas to you and your family doing well remember Elvis Presley is a legend He never be forgotten and beyond 🌲🌲🌲🌲🌲💙💙
@ElvisChick-if9nc Жыл бұрын
I love it an Elvis! It’s Beautiful Thank You for Sharing!😍👑❤️Merry Christmas 2023 Everyone! 💙❤️💚🎄🎅🏻☃️🦌😇🕯️
@doitstepbystep3376 Жыл бұрын
You're welcome! You're welcome very much!
@terrywoolard7505 Жыл бұрын
Fantastic !! That took a lot of hard work To set up and coordinate the timing. Thank you so very much for the upload. Merry Christk=mas and Happy New Year !!!!
@doitstepbystep3376 Жыл бұрын
Thank you! Merry Christmas and Happy New Year to you also!
@HoldmyWine2024 Жыл бұрын
Nothing says Merry Xmas than Addies Voice.
@JohnBinkley2112 Жыл бұрын
This is amazing!!
@doitstepbystep3376 Жыл бұрын
Thank you for the Voice over!
@donkndave7811 Жыл бұрын
Impressive, Bobby!
@doitstepbystep3376 Жыл бұрын
Thanks Dave. The fast beats and rhythm makes sequencing tedious, but worth it if it's done right.
@winstontraille3828 Жыл бұрын
I am a christian
@arl7d Жыл бұрын
This saved me from buying a heat gun. Thanks!
@doitstepbystep3376 Жыл бұрын
You're welcome ! Glad it helped.
@jlovee2211 Жыл бұрын
Does it work with a rubber tube?
@doitstepbystep3376 Жыл бұрын
I have not tried a rubber tube. If you cannot find the correct size, it might be worth it for you to try.
@jlovee2211 Жыл бұрын
@@doitstepbystep3376 it worked💯
@doitstepbystep3376 Жыл бұрын
Rock on @@jlovee2211 ! That's good to know!
@RottenTaco187 Жыл бұрын
Winning 🎉 thanks
@doitstepbystep3376 Жыл бұрын
You're welcome!
@williamyeh6925 Жыл бұрын
Will the GHT with 1/2" barb fit a 1/2" ID flex hose?
@doitstepbystep3376 Жыл бұрын
I would think so, and secured with the appropriate hose clamp.
@chesterjones9565 Жыл бұрын
This works amazing but I would only add heating up the water for at least 2 minute as 90 seconds didn't work for me .
@ibrahimsholeh5140 Жыл бұрын
Hello, is this arch knockdownable?
@doitstepbystep3376 Жыл бұрын
Absolutely! Please see this video: kzbin.info/www/bejne/pqDan3l_gsh3ntE
@BruceAChristie Жыл бұрын
Fantastic tip, thanks.
@gussiebb9729 Жыл бұрын
Aww thank you so much was losing my mind after thinking I had to throw away the smaller gauge hose . Now useful again!!
@doitstepbystep3376 Жыл бұрын
Glad this video is helpful!
@sarahtulk2727 Жыл бұрын
Hi, I want to make this arch for my garden. So I’d like to make it without the bottom bar. Any recommendations for how best to do this for stability! Thanks for video. Best one I’ve watched, and I’ve seen a few!
@doitstepbystep3376 Жыл бұрын
Thank you for the comment! Hmm. I live near the coast and it can get breezy in my garden. I would build another arch and make it a standalone 3D hexagon. I would be brace them with wood at maybe two foot spacing and see it I like the proportions. Maybe have a jasmine vine grow onto it.
@garyhynes Жыл бұрын
Do these hose adapters come in different sizes? The pressure sprayer I got has a hose that is much smaller. Thanks.
@doitstepbystep3376 Жыл бұрын
I would think so. I had to go to a local hardware store, like Ace or Tractor Supply to find the adapter I needed.
@garyhynes Жыл бұрын
@@doitstepbystep3376 Thanks. I'll have a look around.
@briannabarta5477 Жыл бұрын
Thank you for this video! Could this be done on a bit larger scale to accommodate a taller couple? Do you have any recommendations?
@doitstepbystep3376 Жыл бұрын
Hi! I am sure that the dimensions can be scaled up to accommodate a taller hexagon. Just need to use lengths longer than 4'. The one I built is almost 7' tall and 8' wide. In this video kzbin.info/www/bejne/Zn7cgZaIfbqHqaM the groom is 6'3" and the minister is almost 6'4".
@neliachitalu5553 Жыл бұрын
I need to try this
@bcom9389 Жыл бұрын
Pretty cool idea. However, could you just use a hair dryer to soften up the rubber hose and skip the microwave, cup&water?
@doitstepbystep3376 Жыл бұрын
Hi. You can use a hair dryer if you want too. I dipped the hose in hot water to evenly heat up the material so not to risk uneven heating or over heating. One commenter noted that there could be mold or mildew on the fitting if you use the method in the video. My fitting is still working great, with no mold or mildew issues.
@michaelpope9009 Жыл бұрын
Are you still making videos? These are awesome
@doitstepbystep3376 Жыл бұрын
Thanks! I hope to make more DIY videos very soon. I lost access to the laptop and camcorder I used to produce and edit the videos a year ago and have borrowing equipment. I now have a new MacBook and a decent camcorder. Saving up for editing software....
@michaelpope9009 Жыл бұрын
@@doitstepbystep3376 I look forward to your work!
@jeffsguitarwork Жыл бұрын
I'm about to try something similar to this. I'll be slipping 5/8 id nylon vinyl tubing over an 11/16 pipe. For the plumbers reading this, yes I said 11/16 pipe. Apparently my house was one of the lucky ones to get 11/16 pipe made by a company called Westinghouse. It was made in the 80's and 90's, but discontinued. Now it's obsolete so no one makes fittings for it.
@doitstepbystep3376 Жыл бұрын
Hope it works!
@jeffsguitarwork Жыл бұрын
@@doitstepbystep3376 worked like a charm. My Frankenstein toilet water connection goes 11/16 pipe > 5/8 id vinyl hose > 5/8 barb to 1/2 female thread > 1/2 toilet shutoff valve. Next step is to conceal it. I'm thinking 2" pvc slipped over the whole thing with an escutcheon on top.
@doitstepbystep3376 Жыл бұрын
@@jeffsguitarwork Awesome!
@khkhkhhkhkhk4238 Жыл бұрын
Except now moisture inside (hose) and rigid pipe is both wetted, so mold- moisture cannot escape, this creates slime from the mold.
@2Fennie Жыл бұрын
Thank you!
@doitstepbystep3376 Жыл бұрын
You're welcome! :)
@MMAL20.3 2 жыл бұрын
Two years after and still useful
@doitstepbystep3376 2 жыл бұрын
Three camping trips, and still good here too!
@benjamindmoss 2 жыл бұрын
Hi , sorry if this questions been answered. The pocket holes, what distance and length screws did you use please :)
@doitstepbystep3376 2 жыл бұрын
Hi Benjamin. I used 2-1/2” Kreg pocket hole screws for soft wood). Please check the video at the 7:10 mark for the pocket hole instructions. Good luck!
@michaelchanner2403 2 жыл бұрын
Hey Bobby can I use a 2×4×8 to do the job
@doitstepbystep3376 2 жыл бұрын
Yes, you can! The measurements for the joints will be different but they are determined the same way. Here is a link for a 1x4 template. kzbin.info/www/bejne/rmWtYYd_gZmAmcU Same width as a 2x4! Hope it helps.
@antonioromo9965 2 жыл бұрын
You just saved me about $13! Thanks!!
@doitstepbystep3376 2 жыл бұрын
Awesome! I'm glad this helped =)
@venothanmunsami 2 жыл бұрын
Could be a lot quicker if the screws was moved to every point and all fasten first time
@doitstepbystep3376 2 жыл бұрын
Actually by first securing each piece of lumber by not tightening the screws allows each piece of lumber to properly aligned itself with the lumber on either side. This saves time by not having to loosen the screws to realigned lumber that had been tightly secured without the other pieces of lumber on each side.