4 ай бұрын
5 ай бұрын
8 ай бұрын
8 ай бұрын
8 ай бұрын
Жыл бұрын
2 жыл бұрын
2 жыл бұрын
2 жыл бұрын
Пікірлер
@haimr1571 8 күн бұрын
In the video there is ATT setup at 1400
@Emilio_G_S 20 күн бұрын
Te vendo el sistema de tren retráctil para esta madre, solo ocupas un canal mas de tu Tx. para gear up -gear down...
@jhawk1977 26 күн бұрын
You post some really great content around these scale GPS stabilized helis, one of which I've just purchased. I'd like to install the G.T.Power Aircraft Simulated Sound & Light System for Helicopters. I've already set it up, but it requires a throttle cable to "pass-thru" the unit so that based on throttle position the sounds will change. I was hoping this would be as simple as taking the throttle cable going to the H1, plugging it into the G.T.Power and then from the G.T.Power back to the H1. Seems possible...right?
@jhawk1977 26 күн бұрын
You post some really great content around these scale GPS stabilized helis, one of which I've just purchased. I'd like to install the G.T.Power Aircraft Simulated Sound & Light System for Helicopters. I've already set it up, but it requires a throttle cable to "pass-thru" the unit so that based on throttle position the sounds will change. I was hoping this would be as simple as taking the throttle cable going to the H1, plugging it into the G.T.Power and then from the G.T.Power back to the H1. Seems possible...right?
@stevethomas-cc5lz 28 күн бұрын
this guy moves so fast nobody can see what hes doing !!
@kartal56 29 күн бұрын
What is wrong ??? kzbin.info/www/bejne/rmbLh4eqhtplpdk
@haimr1571 Ай бұрын
Hello Is setup the 3d to atti 1400 but when I am hovering in gps mode But when I toggle to Atti the heli Doesn’t hold the same Altitude of gps I have to increase the pitch/Throttle stick to hold it hover Any Idea what is the problem .
@stevethomas-cc5lz 17 күн бұрын
thre is no atti. theres home , gps and 3d
@thatsmyrc Ай бұрын
Ive purchased 3 helicopters from flying in last 2 months. Do you have a part # for a swash plate leveling tool to use on the Bell 206 v3, uh-1 v4 and the fw450L all the same.
@speedtwin5t Ай бұрын
Sexy voice !
@wilwhite3508 Ай бұрын
Is there a book for this controller.
@flywing7015 Ай бұрын
Yes
@stevethomas-cc5lz 28 күн бұрын
theres an H1 manual here on the internet but it basicly says nothing. nobody on youtube or the manual shows how to set any radios up to it. nobody shows if its ppm or pwm. nobody shows if its set to i - bus or s- bus. ive got my 450 set up and all plugged in but my tail servo wont move. its basicly a piece of crap with no instructions.
@emiliyanmartinov Ай бұрын
I have calibrated the FC indoor and outdoor. It stopped blinking red in both cases. There is no warnings in desktop app. But when I try to arm it - it flashes yellow, even there are 16 sats and HDOP 0.78 (indoor and outdoor). No low voltage. What I should do to get blinking green instead yellow?
@flywing7015 Ай бұрын
Check the size of your RC channel value.
@emiliyanmartinov Ай бұрын
@flywing7015 yes, the throttle was high. Thanks!
@clarochip1415 Ай бұрын
Porque ele começa girar a calda quando o motor começa pegar velocidade no chão?
@Chetto1965 Ай бұрын
How to manage different flight modes? (GPS, 3D, ATTI...) In the original radio you have to change the output for each flight mode, for example ATTI is 1400 and RTH is 2000, what I've to set in my Spektrum radio?
@aureliusprimus Ай бұрын
Very fine ! for next versions, it could be nice to put some right and left green /red navigation lights on each side and white light at the front of the heli ! very nice flight !! 😀
@jeffkraus1457 Ай бұрын
Good information video...
@Gert-qv9mw Ай бұрын
Hallo, Sie schließen den Akku an, ohne den Sender zu benutzen. geht das so einfach ?
@RCREVIEWS101 Ай бұрын
How about making a video for RadioMaster TX16S EdgeTx? the only video available on KZbin you need pay $5 to watch, pitty
@123windyron 2 ай бұрын
Had mine up for the very first time right out of the box perfect! Fun whow
@ivanhallberg4801 2 ай бұрын
Cant you talk ?
@Chetto1965 2 ай бұрын
Hello not clear to me how you can set ATT mode on Spektrum…
@xdravex11 2 ай бұрын
Please explain in a video how to fly in ATT mode.
@andresgr3545 2 ай бұрын
Hi. Do you have any information on when version 4 of Bell 206 helicopter Fly Wing is available?
@rickadams5342 2 ай бұрын
Beautiful bird
@gilsonemidio8511 2 ай бұрын
I think you didn't understand my question. I'm referring to these two cable entries that are on the bottom of this radio transmitter, one of which is USB and the other appears to be used for a simulator cable. I have doubts about that. Is the USB used to charge the radio transmitter batteries?
@flywing7015 2 ай бұрын
USB port cannot charge
@stevethomas-cc5lz 17 күн бұрын
ones for trainer cable and other is for computer set up
@gilsonemidio8511 2 ай бұрын
Hello friend, I would like to know what these two cable entries on the bottom of the transmitter radio are for.
@Aviator1009 2 ай бұрын
Support voltage detection of the battery. Only necessary if you activate the low voltage protection in the H1-software.
@stevethomas-cc5lz 17 күн бұрын
ones for the trainer cable. the other is to plug it into the computer.
@wowblackhawk 2 ай бұрын
How do you adjust values, for a non fly wing transmitter? 50% 40% 30% switch adjustments?
@Tucker_T 2 ай бұрын
@wowblackhawk my tx uses 0-100 values instead of 1000-2000. So 0% is 3d, 30% 6g, 40% atti, 50% gps and 100% rth. Make sure you calibrate your sticks I use AT10 II and works for me. 👍
@wowblackhawk 2 ай бұрын
@@Tucker_T thank you. Putting a H1 controller on a 700 soon, and definitely want more range then the stock fly wing TX/RX units.
@Aviator1009 2 ай бұрын
The values I found for my Spektrum Transmitter: Fly Mode 1: Return Home (purple LED) = 100 Fly Mode 2: GPS Mode (green LED) = 0 Fly Mode 3: ATT Mode (red blinking LED) = -20 Fly Mode 4: 3D Mode (blue LED) = -100
@Tucker_T 2 ай бұрын
@Aviator1009 you say red flashing light at 20? Are you sure that's atti mode on you tx? As there is a 6g mode but that also has a red flashing light.... you are definitely in one of those modes. Generally 6g is a lower no than atti. But.... I don't know your radio, just mentioning as you might not have realised there were 2 modes with a flashing red light....👍
@123windyron 2 ай бұрын
How about slow motion on this vid no way can anyone get it its to darn fast
@tumadsvids 2 ай бұрын
Just pause the video where you get lost?
@RobisonRacing68 2 ай бұрын
What is ATT mode?
@Tucker_T 2 ай бұрын
Turns off altitude hold
@tumadsvids 2 ай бұрын
@@Tucker_T No it does not. It turns off GPS only. Get it right pls bud.
@tumadsvids 2 ай бұрын
ATT = ATTITUDE MODE. I.e. Self leveling plus Altitude hold, but NO GPS, so will only drift with the wind.
@Tucker_T 2 ай бұрын
@tumadsvids so how does my 0 & 8 fly work whilst in atti mode if it has no gps? I thought his heli uses gps whilst doing auto flight....
@tumadsvids 2 ай бұрын
@@Tucker_T they dont work in ATT mode only in GPS mode
@willtherocker2373 2 ай бұрын
😂😂😂😂
@gilsonemidio8511 2 ай бұрын
Hello Friend, if by chance during the flight you lose the GPS signal completely, what flight mode will the model adopt?
@tumadsvids 2 ай бұрын
You forgot to mention that we need to sand the blades first else they dont actually fit
@tumadsvids 2 ай бұрын
When I try this on both my UH1, it loses control and flies away. Might be a coincidence though but very strange.
@gilsonemidio8511 2 ай бұрын
Hello friend, can the compass be calibrated indoors or does it have to be in the field?
@gilsonemidio8511 2 ай бұрын
Hello friend, can the compass be calibrated indoors or does it have to be in the field?
@thatsmyrc 2 ай бұрын
My brand new uh-1 Huey has the death wobble. What’s the fix for this as I was going to purchase the bell 206 but not so sure unless I can resolve the death wobble on first helicopter made by flysky
@samybergh1917 3 ай бұрын
Hello I bought the flywing bell 206 v3 2 days ago and noticed today that it shakes so hard when starting on the ground at medium speed that I had to stop using it. Can the setup change in this video help or do I need different settings for the bell 206. Regards
@flywing7015 3 ай бұрын
Yes，this video can help you
@vincentcimino1963 3 ай бұрын
Recently received the V4 version, it flies flawlessly, a few minor changes in the H1 software which was easy made the flying smoother, lotsa fun!!
@Cakey831 3 ай бұрын
Can you share your changes to make it fly better?
@vincentcimino1963 3 ай бұрын
@@Cakey831 for me…I went into the H1 software and set my throttle speed to 65%, Flywing did put out a video on KZbin with some recommended settings do a search and you should be able to find it.
@rcaviater 3 ай бұрын
i gave up used beastx instead
@rcaviater 3 ай бұрын
mine just says no rx signal
@leftnuff 3 ай бұрын
Does this heli have a Fail Safe system to prevent Going to far (Out of Range) or "Low Voltage Return to Home" ?
@Emilio_G_S 3 ай бұрын
That’s simple, hahaha, it is not easy …
@davidharrington956 3 ай бұрын
Thank you so much for helping me with my helicopter 😊.
@AstouCiss-kp6yc 3 ай бұрын
Comment faire pour le acheté ❤
@flywing7015 3 ай бұрын
www.flywingrc.shop/
@tumadsvids 3 ай бұрын
HI Does the swash gain and Swash EXP parameter affect the heli in GPS and ATT mode or only in Acro-3D mode? Regards
@flywing7015 3 ай бұрын
Simultaneously apply to these three modes.
@vincentcimino1963 3 ай бұрын
@@flywing7015sport, standard and soft get all the same changes?
@wowblackhawk 3 ай бұрын
Just took delivery of one. Why aren’t you guys adding updated parts? Still the old school gps and esc in it. And how can I get the software to reflash the controller and Heli? Seems neither were bound correctly.
@rmb1 3 ай бұрын
I WOULDN’T TRUST THE CONTROL BOARD ON ANY OF THESE CHEAPLY MADE CHINA HELICOPTERS. SUCH A WASTE OF MONEY. BIG ISSUES WITH THEIR CONTROL BOARDS AND NOTHING CAN FIX IT. TOTAL JOKE.
@Peace5374 4 ай бұрын
Very nice. Please make the us marine ch53e super stallion, ah 1w super cobra, v22 osprey
@joaopinheiro9738 4 ай бұрын
Olá, no modo gps ele voa 3d?
@flywing7015 4 ай бұрын
3D can only fly in 3D mode, GPS mode is GPS flight, 3D mode is manual mode, GPS is automatic mode
@hotscarywjm 4 ай бұрын
Love your videos FLY WING! Any suggestions on how do remedy the wonderfully useless venting of the cockpit? I have drilled a grid of 1/4" holes in the see-through lower windows on the lower fuse. These are the windows just below the nose of the helicopter. The ridge vents near the top of the canopy were only half of the solution. Cheers!
@joaopinheiro9738 4 ай бұрын
Olá, como configura para partir o motor suave
@flywing7015 4 ай бұрын
Please ensure that the propeller is neither too loose nor too tight. It will only remain stable without shaking when the tension is just right. Wishing you an enjoyable flight!
@clarochip1415 Ай бұрын
Conseguiu?