I appreciate you, hope you enjoy I personally can’t wait to see his reaction
@thereflectionartist10 күн бұрын
@@TongateRacing Absolutely
@adriandavalos357813 күн бұрын
Looks super good brother 🤙
@TongateRacing13 күн бұрын
Thanks brother , it’s getting there little by little
@emperorgsx13 күн бұрын
Its look goood🔥😎🤙
@TongateRacing13 күн бұрын
@@emperorgsx thank you sir still not light at the end of the tunnel… hopefully I’ll start to see the end soon
@wookiebw13 күн бұрын
Next time buy tires that fit, stretched tires are more dangerous and decrease the amount the sidewall can hold.
@TongateRacing13 күн бұрын
The tires arnt stretched very much, the front tires are a little more than the rear 235/40 on the front 9.5” wheel 265/35 on the rear 10.5” wheel I went with the minimum size tires for the width of the rim because I was worried about the fitment when aired out the tires fit pretty good 👍🏻
@TongateRacing13 күн бұрын
But don’t worry there’s a lot of rubber on the ground 😁🤙🏻
@TheBlockParty87014 күн бұрын
What green is that
@TongateRacing14 күн бұрын
It’s Kawasaki green paint code 777
@TheBlockParty87014 күн бұрын
@@TongateRacing where can you buy it from I’m restoring a replica and can’t find it
@TongateRacing13 күн бұрын
Any paint house should be able to mix it Motorcycle Kawasaki Lime green Code 777 Years 2005 to 2005 Formula 98996 Mix amt 1 gal System medium solid Mine was mixed with TransStar LV52 Topaz. 1970.7 LV21 Lime. 199.8 LV31 White. 145.8 LV301 Basecoat Binder. 1488.8 I started with a white Upol 2K high build then paint then a pro finish 2 part Glamor clear slow Hope that helps brother if not let me know I’ll make a video of the paint and clear
@TheBlockParty87013 күн бұрын
@@TongateRacing yes thank you
@amyturner101321 күн бұрын
This picture collage of how it started and where you are at is awesome!!!!
@TongateRacing21 күн бұрын
Thanks so much I really liked it , I wasn’t going to post it till all the images in the clip were released however I liked it a lot so decided to go ahead and publish it 🤙🏻
@JetVr3021 күн бұрын
Nice work man! It’s came along way
@TongateRacing21 күн бұрын
Thanks it’s been a labor of love for sure and emphasis on the labor part 😁
@wookiebwАй бұрын
Comment for the almighty algorithm - So I have this buddy of mine, we've been friends for over 3 decades now and I've got a lot of memories from that time. Now I don't know why, but while watching this video I was reminded of the first time I ever went to his house. This guy, he's a bit of a smartass and when he was young wasn't the best about watching what he was saying. So anyway, first time he brings me to his house (we're about 14/15 or so I think) he decides to mouth off to his mom, which I'm also meeting for the first time. She gets a look on her face and my friend tries to run. He gets to the hallway before the force-of-nature that was his mom decides to fucking hockey check his dumbass right into the hallway closet. It was glorious! I think I laughed, I'm not sure. I didn't move, though, I didn't want to draw her attention onto me. Fuck that, I didn't want to be the next victim. She was an amazing woman, and over the years I definitely brought some of that doom upon myself as I was a bit of a smartass, but that didn't lessen the love I had for her.
@TongateRacingАй бұрын
Man I miss my mom … I would do anything to get my ass beat just one more time .. or you know just talk and get a hug it’s funny I tell this story all the time brother it’s one of my best memories/story’s 😍
@wookiebwАй бұрын
That line still looks kinked, fucker!
@TongateRacingАй бұрын
I was busy putting air ride in 😂 don’t worry I looked at it it’s not kinked but I am going to make it a little longer before I put the motor in
@Benny-yb1yyАй бұрын
Now im eeady for my lessons 🏊
@Benny-yb1yyАй бұрын
Overall, BRaVO" i think you did a wonderful job
@Benny-yb1yyАй бұрын
Nice bro
@TongateRacingАй бұрын
Thanks
@Benny-yb1yyАй бұрын
But good job bro.
@TongateRacingАй бұрын
Thanks
@Benny-yb1yyАй бұрын
So don't be disappointed, did you colors and the base coat?
@TongateRacingАй бұрын
Not really I sprayed a coat ( learning the gun and how to adjust it) then went over it wet smoothed out a couple of runs the when I had the gun and speed to where I thought I was comfortable with it i sprayed coat 2 and 3 then went straight into the clear … there are some imperfections and a couple of drippy spots above the license plate but over all it look pretty good for my first time spraying base clear I’ve done a single stage once but this was by far the most work I’ve put into body and paint 🤙🏻
@Benny-yb1yyАй бұрын
Color Sanding and buff does not always come out as shiny as the spray to finish appearance
@Benny-yb1yyАй бұрын
Cant wait to see the response of Galvin
@TongateRacingАй бұрын
Me either I hope I get thing so awesome he never wants to get rid of it
@Benny-yb1yyАй бұрын
Cant wait to see the response of Galvin
@Benny-yb1yyАй бұрын
Looks nice, body works appear to be exceptional, time for some 1500 21:34 -2000 the change is going to be defined by the touch of the buff
@TongateRacingАй бұрын
I can’t wait to cut and buff it to see how I really shines .. I spent a lot of meticulous hours redoing body work that I didn’t like 👍🏻
@wookiebwАй бұрын
Looks like you need to trim the hose from the rear brake reservoir to the brake booster, it's pinching a bit at the first 90* bend.
@TongateRacingАй бұрын
I'll definitely take a look at it, thanks brother.
@ccrider57492 ай бұрын
Sweet
@TongateRacing2 ай бұрын
Thank you I’m trying to do the best I can 🤙🏻
@jamesguiboa47922 ай бұрын
It’s come a long way !
@TongateRacing2 ай бұрын
Thanks , Yes it has just slow going right now I’m editing a video right now putting the air struts in once that’s done I can get some wheels and tires on it and get it to modern image 👍🏻
@user-rj6ve7vv9f2 ай бұрын
Looking good!
@TongateRacing2 ай бұрын
Thank you so much it’s definitely a ton of work but I think I’ll be delivering a badass car to my son in a few months and I’m sure he will love it 😍
@wookiebw2 ай бұрын
Goonigoogoo
@TongateRacing2 ай бұрын
😂
@twowitnesses72 ай бұрын
This car was pop culture gold. kzbin.info/www/bejne/rYnIlnWJgKirm68si=5-JajQMla74CgUQI
@TongateRacing2 ай бұрын
Sorry, I must have missed your comment but I’m going to watch your video after work tonight when it’s a little quieter and i can hear it 🤙🏻
@twowitnesses72 ай бұрын
@@TongateRacing 🙏🏽🙏🏾
@alicialatta78812 ай бұрын
What's happenin
@JetVr302 ай бұрын
That thing came out 🔥. Color sand and buff is going to be insane!
@TongateRacing2 ай бұрын
I really hope so I’m going to put the graphics on and 3 more coats of clear so hopefully I’ll get that deep shine 🤙🏻
@rebakahrecovers90742 ай бұрын
That's bad ass cuzzo
@TongateRacing2 ай бұрын
Thank you so much it’s a ton of work but it’s starting to look amazing I’m excited 🤙🏻
@wookiebw3 ай бұрын
Comment for the algorithm gods
@TongateRacing3 ай бұрын
Hell yeah brother 🤙🏻
@TongateRacing3 ай бұрын
But in all honesty I think the paint job turned out really good 👍🏻
@Crotal_Karma4 ай бұрын
Watching this first video, I'll try to watch in sequence. Let's see how it goes! 👍
@TongateRacing4 ай бұрын
The first one is boring as hell 😂 but it lays out what I want to accomplish.. they get better as you go I really was a new to making videos in the beginning, hope you enjoy
@Crotal_Karma4 ай бұрын
@@TongateRacingwe all start somewhere.
@rb39844 ай бұрын
Same! I'll watch from here and catch up
@TongateRacing4 ай бұрын
@@rb3984 hope you enjoy
@TongateRacing4 ай бұрын
If you guys see anything I can improve on or just make better lmk 🤙🏻
@amyturner10134 ай бұрын
Ok, that center console looks absolutely outstanding 👏
@TongateRacing4 ай бұрын
Thank you Amy ,I really love it 🤙🏻 can’t wait to get the interior done and stand back and enjoy it
@user-of7kd6np8t5 ай бұрын
It is really looking good.
@user-of7kd6np8t5 ай бұрын
Bad to the bone.
@user-of7kd6np8t5 ай бұрын
The clear that is.
@user-of7kd6np8t5 ай бұрын
Tack, an spray' evenifyou get a Run or two won't matter " it's going to follow in line
@user-of7kd6np8t5 ай бұрын
Do not use fingers only block
@user-of7kd6np8t5 ай бұрын
Blocking looks good from phone
@user-of7kd6np8t5 ай бұрын
Time for colorsand and ...and then clear tip? No, fan and distance " along with volume.. Color sand.
@justinmarcum41215 ай бұрын
That is badass!!
@TongateRacing5 ай бұрын
Thanks I’m digging it, it’s turning out better than I had expected 😁 can wait to get the livery put on
@user-of7kd6np8t5 ай бұрын
Anal... hahaha
@user-of7kd6np8t5 ай бұрын
😂
@user-of7kd6np8t5 ай бұрын
Right
@user-of7kd6np8t5 ай бұрын
600
@LuckettsGarage5 ай бұрын
I came across your KZbin today and I have been binge watching this build all day. This project is a loooooot of work but will be 100% worth it when you're all done. Im a subscriber now and I look forward to seeing future videos. Keep up all the hard work!
@TongateRacing5 ай бұрын
Thank you 🙏 that means the world to me I want to make this thing badass for my son…. I try and get videos out every week but sometimes I have to work or have no parts and don’t get a video out … I’m excited for the next one should be paint
@user-of7kd6np8t5 ай бұрын
Now since he picked me to death: I have to do the Finnish Spay Painting myself so no one gets the final finally finish because the end result is because of the blocker Painters that only want to paint are lazy and want the credit for the Finnish the prestige they don't deserve.
@TongateRacing5 ай бұрын
😂 yes I’m very “picky” attention to detail is what this car is all about I want it to be as close to perfect as I can for my sons first car and I’ve gone the extra mile in every aspect of this car so far and it’s beginning to show I can’t wait for the next step installing the air ride and putting everything back together 👍🏻
@user-of7kd6np8t5 ай бұрын
Perfection takes Time, time takes money, quality is the hands that does it!
@user-of7kd6np8t5 ай бұрын
The only thing to run is those to follow playing ketchup
@user-of7kd6np8t5 ай бұрын
He's really a Particular kind of mind, yet Respectable, picky yet picking me to death. In body work attention to detail
@user-of7kd6np8t5 ай бұрын
Shows most definitely ' , in the Finnish blocking as far as runs in polyprime it can be used
@user-of7kd6np8t5 ай бұрын
As a filler so in detail the hight is above the body line you can only block down only to end up in the perspective line. End result Beautiful lines.😅
@user-of7kd6np8t5 ай бұрын
In bodywork: Deception is the Motavator sometime deceiving the creator because beauty is in the eye of the beholder meaning , what you think you see is not actually the way that it is you see it. It's like does the dress make the woman or the creator of those lines
@amyturner10135 ай бұрын
So when is paint day???
@TongateRacing5 ай бұрын
Amy we’ve got a few hours left to finish up the rear bumper I wanted to paint it today but we didn’t finish so maybe next weekend we will finish and will be ready to paint however it’s supposed to rain all next week so I’m guessing then next warm day after next week I’ll be shooting the Kawasaki 777 Green on the car 🤙🏻
@amyturner10136 ай бұрын
This is starting to really come together!! So excited for you!!!!🎉
@TongateRacing6 ай бұрын
Amy, I’m really excited too if the bodywork gets done this weekend it’s supposed to be 65° on Monday and Tuesday I’m really thinking about painting this thing next week.. 😁😁😁
@user-of7kd6np8t6 ай бұрын
Little more faness
@user-of7kd6np8t6 ай бұрын
Looking good!😊
@TongateRacing6 ай бұрын
Thank you I’m really impressed with how it’s turning out
@emperorgsx6 ай бұрын
Those quarter panels look good🔥🔥🔥
@TongateRacing6 ай бұрын
Man I love the way they turned out 😍 the contrast from the green to the carbon is going to look so awesome 🤩
@emperorgsx6 ай бұрын
@@TongateRacing it definitely will look good🔥🔥🔥
@ccrider57496 ай бұрын
Just subscribed
@TongateRacing6 ай бұрын
Awesome I hope you enjoy the build 🤙🏻
@ccrider57496 ай бұрын
I'm really interested in the chassis mounted wing. Never seen one on a DSM. I would have to build one because 3k = 2 more DSMs.
@TongateRacing6 ай бұрын
@@ccrider5749 I know your right 🤙🏻 I’m building the structure but man that APR 71” swan neck is pricey
@ccrider57496 ай бұрын
@TongateRacing steel rods and aluminum sheeting, to cover it and nobody would know the difference at a far.
@TongateRacing6 ай бұрын
@@ccrider5749 😂 that’s funny , but I’ve got a small fortune into this car already another 3K won’t matter much 😁🤙🏻
@mikerucker97466 ай бұрын
happy to see people still building theses carry on subed