Hey my friend! My nozzle seems to be to thick. Do you know the one you use?
@gustavoponciano548025 күн бұрын
Cuánto mide las bocinas de los JBL flip 3 de los cuadrados estoy buscando piezas pero son iguales las mismas medidas flip 4 de las bocinas .
@stephaniesmith100429 күн бұрын
Thanks for this video. I was able to repair my sons kindle. It was my first time doing something like this but the instructions were good.
@jaredgarner921Ай бұрын
Is there a way to send you devices to be repaired i have this same exact unit but on start up it goes straight to the radio and doesnt let me press any of the buttons on the front really want to get this unit fixed
@Pete..Ай бұрын
I don't know why unsolder the speakers they just pop right out of there holes and then when you're done, you can just pop them back in un soldering. The speakers is such a waste of time but to each their own My tablet could be a little different but it's basically the same I think
@blackwolf1mwp746Ай бұрын
Can we bypass it like you did at the beginning of the video with the rca or if it damaged/fried we can use the head unit and get audio out of speakers even with an external amplifier?
@TheRetroBenАй бұрын
@@blackwolf1mwp746 it is possible just remove the bad chip, however the amplifier chip is also what sends out the amp turn on 12v signal on the blue wire, so you wou have to run your amp turn on to a switched power source. I was going to do this with mine as I run external amps and don't need the speaker outputs on the head unit, but I found the chip on AliExpress for really cheap so I decided to just replace it, it made a good video also 😁. Thanks 👍
@thesufiАй бұрын
Well done! Too much work for me though.
@bricepeterson2582Ай бұрын
Where can I get my resistance from
@bricepeterson2582Ай бұрын
I like. Your work
@ezekiel1820Ай бұрын
great vid. was able to use one tablet as parts and fix my kids broken tablet
@daniloguimaraes88Ай бұрын
Good job! i tried to fiz mine and still disassembled for almost 3 years. I will try to refix e make it works again. JBL didn´t project it to repair, unfortunately. Thanks for sharing knowledge!
@RakeshKumar26026Ай бұрын
Very Good 👍
@tonycastro61542 ай бұрын
THERE IS AN EASING WAY TO WIRE UP AN EXTERNAL RELAY TO BYPASS THIS
@florentinoacosta43682 ай бұрын
Ooops! 90 Degrees off.
@boyfromblackstuff78592 ай бұрын
Thanks for posting, very interesting. Regards from England.
@c4love3 ай бұрын
Hello awesome video great info! I have the same amp when i apply 12v to the amp the power light comes on very dim an flickers on/off very rapid. Any ideas here? I checked all the mofs an cant seem to find any issue there
@ThisIsSolution3 ай бұрын
Not sure if u will see this, but my low ohm light is also on, is this the common fix for this?
@jonathankeenan803 ай бұрын
Can you replace the original usb port with usb c?
@daraung89794 ай бұрын
Would you be able to build me a flat ribbon extension for that screen? I am trying to mount the screen in a different location than the head unit.
@thefadebeta5804 ай бұрын
Want another one? I can't get the charging port fixed, I need a microscope.
@roger17sylvester4 ай бұрын
I have a XAV-AX7000 doing the same thing. Do you do repairs for people?
@TheRetroBenАй бұрын
@@roger17sylvester sometimes I do but I am very busy with work and other things so my turn around time can be quite long 😞
@RICHIE-ch3in4 ай бұрын
Very complivated jbl made it on purpose so i could buy new chip
@PanasonicCobra5 ай бұрын
Good Job 👍👍👍
@xParris5 ай бұрын
Thank you for the video, this made the repair a breeze. Worked perfect.
@rashadabdullah97695 ай бұрын
Omg, im sold.
@LawrenceSeetoh5 ай бұрын
this is very informative, thank you
@digitaloverdrivesystems5 ай бұрын
kzbin.info/www/bejne/gJfUpmRuadaKqqs
@nrtg62906 ай бұрын
Appreciate the vid. Saved me time. I tossed it in the trash and ordered a newer model. Time is money.
@tim94306 ай бұрын
Great presentation. Thank you!
@angelstolen69666 ай бұрын
clean work. good job.
@angelstolen69666 ай бұрын
great job in diagnosing and narrowing down the culprit. Subscribed.
@derranrobinson82296 ай бұрын
Thanks for sharing this video on how you fixed this radio. Any advice on how to learn how to solder? Thank you
@TheRetroBenАй бұрын
@@derranrobinson8229 thank you, soldering is actually quite easy with some practice. There are many videos out there with tips... Maybe I should make one 🤔. For starters get a good temperature controlled soldering station such as a Weller or hakko, some can be found on sale for a decent price. I have an old Weller station that I have had since 1997, so if you get a good one they can last a very long time. There are also practice circuit boards that you can purchase to learn with. Practice makes perfect, I just realized I have been soldering for over 40 years now 😳... Wow I'm old.
@GReaper7 күн бұрын
The TS100 and TS101 soldering irons actually make great beginner irons.
@axore136 ай бұрын
can we found one original game boy screen the original only ?? ty and great video you help me with this
@davids16187 ай бұрын
When I replaced the capacitor, I left the leads long so that it would be away from the resistor. I used pieces of tubing to isolate and insulate the leads. Striped wiring insulation will work fine.
@TheRetroBen7 ай бұрын
Good idea, it does get cooked by that power resistor otherwise.
@davids16187 ай бұрын
I fixed the no display by replacing C920. While you are at it, change C921 as well.
@davids16187 ай бұрын
Does anyone know what the voltage should be on the filament leads of the vacuum fluorescent display?
@woodbinescab7 ай бұрын
Any idea if the boot hdd can be removed and replaced ?
@laidman20077 ай бұрын
Very useful. Thank you.
@MosquitoCreekHoulas7 ай бұрын
I just picked up the same amp, but has issues and needs repaired. Any chance i could send this to be fixed?
@tvdinner3257 ай бұрын
So...I did some things off camera...and there you go. Please like and subsribe.
@Retro_Highlights7 ай бұрын
I need help on my Nintendo the same like that. It won't work and my parents won't help me.
@davids16187 ай бұрын
How do I get the display to be brighter?
@robertonunez96617 ай бұрын
Does anyone know any place in the Phoenix area where I can have this same fix?
@JulieRoo8 ай бұрын
Hello Ben. Sos from a British lady here, essay warning. I have a Sony XAV ax 5550d stereo, looks very similar to the stereo in your repair. My fault is different, it has a dab radio built in. Bought the stereo second hand, with a magnetic aerial, swapped that for a windscreen stick on aerial BUT the plug was faulty and snapped the dab aerial port on my xav. 🥺 So now I only have fm radio, which in the uk is rubbish. Do you remember having your xav open when you made this video? Any idea what parts I need to repair this, or how to repair it please? Sony want £200 to fix it, which is madness. This is an sos, because no one else seems to have any photos or videos of the inside of my headunit. Im not a repair novice, and have a soldering iron, loads of screwdrivers and sockets etc, but no actual understanding of what part does what inside a stereo. Hence im trying to contact a competent person, such as yourself, before I remove the stereo to attempt a repair. (The removal in itself is a pain in the butt as its a modified retrofit, aka i MADE it fit using a hacksaw on my car's centre console area. Its a double din Sony, and my Mini was designed for single din only, but the XAVs are double din front, but almost single at the back. Its a known mod to my model of Mini, so I had others advice and mistakes to learn from/avoid, and a good idea of how to make it work. It was all going so well until I decided two aerials on my roof looked silly. 😢 All the scruffy bits are neatly tucked away in the void behind the glove box, and the cut bits are under solid original plastic trim, so are as safe as it was before i removed the original tape deck stereo to modernise)
@TheRetroBen7 ай бұрын
Hello, thanks for the comment. As for you radio I am not familiar with the connection in question. Mine only has one connection for the antenna which is the big round hole on the back left. What is the exact model of your unit?
@Sci-Mon18 ай бұрын
I have a AX5000 and the yellow video RCA for the backup camera doesn’t work. I thought it was the camera but I troubleshooted with 2 other camera, wiring, etc. It has to be the yellow rca port. I tried cleaning it and nothing. Do you have any idea if this is board related?
@TheRetroBen8 ай бұрын
Hello, it is possible, however on my 5500 there is an option under settings to completely turn off the yellow camera input, I would definitely check that. Also be sure the reverse camera input wire has 12v on it when testing the cam to activate the yellow input. I hope this helps.
@_moonstxrs_24258 ай бұрын
i just got this in my car but why does my audio sound worse than before. I made sure that I paid for a good one so my audio wouldn't get screwed up and it sounds like water is in my speakers now
@TheRetroBen7 ай бұрын
It sounds like one or more speakers are wired out of phase (wired backwards +and - swapped) that would make it sound like that.
@renemarrufo75368 ай бұрын
Very cool and technical, clean and very well done.
@Henningberge8 ай бұрын
Do you know if the flex cable from the screen to the motherboard can be extended, for remote mounting of the screen?