14 күн бұрын
2 ай бұрын
5 ай бұрын
8 ай бұрын
Пікірлер
@JasonNosajasoNosaj 14 сағат бұрын
$50 option is bike inner tube on plywood
@graeme111 11 күн бұрын
Any concerns with the stability? Looking to use the Easyflex ones on my 8020 rig for isolation
@OSim42 11 күн бұрын
I made mine quite narrow so it does move around a lot, mostly when my wheels gives me some force feedback quick responses... But then again, I like it that way. Making the base wider would make it a lot more stable.
@graeme111 11 күн бұрын
@@OSim42 no risk of it like, toppling over though?
@OSim42 10 күн бұрын
Nope, it would require me to actually "try" to do so, if you understand what I mean.
@leomatis_ 28 күн бұрын
Did you 3d print the mounts for the springs?
@OSim42 28 күн бұрын
No, the springs came with the mounts. They are made out of rubber.
@thomasvanlanen6279 Ай бұрын
For those looking for a even cheaper option! I got my sim rig on a plywood sheet with 4 of those air wedges under the corners, cost..€10!
@louismarauding4300 Ай бұрын
That voice doesn’t invite to stay and listen
@AmrAlhabarneh Ай бұрын
My thinking is 4 Dayton 50watt and 4 Adjustable air shocks 165mm!!
@OSim42 Ай бұрын
Air shock... Didn't think about this idea. If you go for it, tell me how it turns out.
@ForsytheGaming Ай бұрын
Sucksx you got screwed by someone trying to gain a position before the yellow flew. Ended his race and wrecked yours.
@OSim42 Ай бұрын
Yeah, that's my story pretty much every time I do this track. People are way too agressive and end up wreaking and bringing up others with them.
@obrohta22 Ай бұрын
Nice run
@mrmadunit3923 2 ай бұрын
it could be a thing if not WOBBLY lol im off to try im intruiged LIGHT DUTY INDUSTRIAL VALVSPRINGS 40/50 mm diam cheap as chips and stainless
@OSim42 2 ай бұрын
As any DIY project, you can set it up to your taste. I did mine quite narrow, this makes it really wobbly. But by making the base wider, you will have a lot more stability. Good luck!
@frankerwin5379 2 ай бұрын
the net code issues seem to have gotten worse over the last few weeks.
@OSim42 2 ай бұрын
Sad to hear that, it's the worst enemy of any Indy car race, and if it's worst, then this can only mean bad things for the community. 8(
@leo-p5v2h 2 ай бұрын
good video but you need to turn up your mic, i can hardly hear you
@OSim42 2 ай бұрын
Thanks for your comment, I will crank it up for the next one.
@obrohta22 2 ай бұрын
You're back!
@OSim42 2 ай бұрын
Yup! 8)
@bit-eki 3 ай бұрын
i now have my rig on springs and its made such a difference to the experience so thank you so much. i had a long winded idea to do with springs and a diy arduino motor for motion. i wanted to know your thoughts on the idea. if you had more spacings in the springs and you incorporated a motor to pull one end of the rig down , even if its just 10mm to give the sensation of the front of the car lifting up as you accelerate? i use vr and probably to slightest movement will feel a lot move when your in vr. i was litarally thinking of a pully on a sub frame. do you think its worth a try as i already have half to parts i would need
@OSim42 2 ай бұрын
I thought about it, but then you need to find the motor, and then to link it somehow to your PC, and send inputs... That's way over my skill level. But I know it can be done.
@stedz2000 3 ай бұрын
I'm looking into this and I got a similar price from a different manufacturer. They show adjustment to adjust the springs pretty tight for maximum vibration containment. Their shop is called fixing smith. I'm early days I'm my research but it might be worth looking into tightening the springs. Nice setup btw
@farfarad89 4 ай бұрын
which aura bass shaker do you use? i have 4 sinutec bs 250 shakers with fosi audio zk1002d mini amplifier. Are they strong enough for the movement??
@OSim42 4 ай бұрын
I use two AuraSound AST-2B-4 Pro Bass Shaker Tactile Transducer for the back, and one Buttkicker for the front. I'd say that it's enough to make it shake up to my taste. I think you have enough shakers to do the job, but might lack a bit on the amplifier side. But as any DIY project, worst case, you buy another one to improve the thing. Good luck!
@farfarad89 4 ай бұрын
@@OSim42 thank you. Great to know
@bit-eki 4 ай бұрын
I wish there was a cheaper alternative, Ive found a 265lbs but i dont know if that will take the weight of the rig and myself. thankyou for the video
@OSim42 4 ай бұрын
Please remember that you have 4 springs to take the load of your rigs, so math will tell you that if your rig weight let's say 400lbs, and you about 200, that's 600 total, divided by 4, makes it 150 lbs on each springs. Give or take, since the weight distribution is not even, the back will be most of you and front mostly your feet and monitors (if connected to).
@27tattoo72 4 ай бұрын
I hope you are able to get back to racing soon!
@ForsytheGaming 5 ай бұрын
Pimax will be a cool upgrade, sucks is gonna take 3 months.
@OSim42 5 ай бұрын
Yeah, every review I saw said it is the new "best thing", so can't wait to try it out. And yes it will take some times, I only hope it won't be as bad as my order for the Fanatec CSL DD, which took 6 months!
@obrohta22 5 ай бұрын
No!!!!! Get back soon!
@OSim42 5 ай бұрын
Sure enough! This is gonna be painfull to wait this long...
@obrohta22 5 ай бұрын
@@OSim42 I never got into virtual. Still run on a single screen.
@Captain_Lego_racing 5 ай бұрын
errr, check the 2, 3, and 12 chevys for a push to pass button-
@a-ztube 5 ай бұрын
Amazing that's the same I'll had in my mind but i wasn't too direct mount it to my playseat challenge 😉👍
@OSim42 5 ай бұрын
I used the wood to make it more stable and also make the whole rig on the springs. If you do it, I'd like to see what you end up with.
@dborup 5 ай бұрын
Awesome video, and great “hack” Did you get the last 2 ?
@OSim42 5 ай бұрын
Yes, the project is complete and I LOOOOOVE the thing! Also, my GF like it because there is no more rumble on the floor, so it's really quiet for people around.
@OSim42 6 ай бұрын
Inspiration for the title of this video : kzbin.info/www/bejne/qZSYmoeEi6qCd8k
@obrohta22 6 ай бұрын
That sucks! Yeah that race takes 3.5 hours. I missed the best times to run too. And I couldn’t run the open. You could win this. More experienced drivers like us know strategy the novice runners don’t.
@OSim42 6 ай бұрын
I was unable to lead the race, as the setup of the other guys were faster, but at the same time, I was clearly in the top 5. And for the time, I will take that into account for next year...!
@obrohta22 6 ай бұрын
Hey we finished in the same spot!
@fostermatt80 6 ай бұрын
What was the league again?
@OSim42 6 ай бұрын
This is the Road Open Series. (I put it in the title. ; )
@obrohta22 7 ай бұрын
Nice run! My brother came in P2 in this race.
@OSim42 7 ай бұрын
Yeah, I knew he was related to you, but didn't know in which way. Cool!
@cmderinchief 7 ай бұрын
I've raced with Antonio many times. I have never found him to be a dirty driver.
@OSim42 7 ай бұрын
Good to know. I had and still have nothing against him. At the time of the event, I was surprised, because it really felt like he did make a "wheel hit", more so because he was already passing me, there were no point in doing it. So that's why if it happened to be such an intended hit, I would have reported, because it was really a useless case of hitting someone for no reason. Now like the review showed, it was a bad case of netcode, which makes a lot more sense.
@Malik-revved-up 7 ай бұрын
Cars 1 scene
@eloygomez2373 7 ай бұрын
Great video
@OSim42 7 ай бұрын
Trying my best! ;)
@eloygomez2373 7 ай бұрын
@@OSim42 see you in the Next race
@obrohta22 7 ай бұрын
Noooo!!!!
@OSim42 7 ай бұрын
Yeah.... But at least I made it till the end, this time...
@fostermatt80 7 ай бұрын
Thanks for adding the relative! You don’t have to do either or though. It’s nice to have the standings with like top 5-10-something and then it can show laps remaining etc too
@johnwalshaw 8 ай бұрын
I see you've been live-streaming and was cool tuning in a few days ago. I was going to drop a comment but was not possible on the livestream.
@OSim42 8 ай бұрын
Yes, the comments are off because I do VR and I can't see them, it's a VR limitation (open XR). Hope it get fixed sometime soon.
@M4R71N_88 8 ай бұрын
Eeeeeee, eeeeemmm, eeeee
@fostermatt80 8 ай бұрын
Enjoyed the vid. You should add the iOverlay relative too. It's a little hard to read the in game when you're looking around and stuff. Also every time you looked to the left exiting a corner I thought you were losing the backend. I'm not used to see this in the VR perspective, haha.
@OSim42 8 ай бұрын
Thanks for your comment, I'm still testing overlays, see what's good and useful. As for the back end, it was very stable this time around, but it was a totally different story at Texas on Monday.
@obrohta22 8 ай бұрын
Nice strategy, better catch!
@OSim42 8 ай бұрын
For some reason, I was afraid of passing people and get hit by Netcode. Well, I guess my fear was right. o.O
@concepcioncastrosalinas6261 8 ай бұрын
I love how indycars make the illusion of a closed cockpit
@finerim2370 8 ай бұрын
nice vid just need a little more audio
@OSim42 8 ай бұрын
Now that you mention it. Will consider for future vids. Thanks for the feedback.
@mosesvega1300 8 ай бұрын
😊 'promo sm'
@ji3200 8 ай бұрын
Hi, i have question. If i use 4 of Dayton BST 300watt version, can i use 2 of 300w×2 channel amplifiers or do i have to use 1 amplifier that has 300w by 4 channel. Im not sure if 2 amplifiers can be use for this tactile racing setup.
@OSim42 8 ай бұрын
You can use 2 amplifiers, simply split your output into each amp. You could also use two different sound cards, by doing so, you would be able to set up your software for each of your corners (front left/right, rear left/right).
@obrohta22 8 ай бұрын
Don't get me started.....😖😛 Great run. That start was way too slow. I stopped but dude behind me didn't.
@OSim42 8 ай бұрын
Well, this is what happen when the iRating system is not respected. They took the Road iRating to make the splits. As a result, we had 4k and 1k drivers mixed together. People with less experience and knowledge fighting alongside people that knows how to avoid wreak and actually do a restart.
@Yaroslav2205 8 ай бұрын
Happened in every split. I hope they will fix the results
@OSim42 8 ай бұрын
Sure they will, give them time. ;)
@obrohta22 9 ай бұрын
Stay off the primary tire as much as you can. They're usually terrible and way too slow. I went RRRB in this race. Very few tracks where the primary is the preferred tire.
@obrohta22 9 ай бұрын
And I went RRRB so that I only had to do 12 laps on the primary at the end. A worn Red is as fast as a new Black.
@OSim42 9 ай бұрын
Thanks for the tip. I must admit, I am so bad at road racing that I can't see the difference between both of them... Haha! But of course, with time I will. =)
@obrohta22 9 ай бұрын
We've raced a million times on ovals. You'll be up to speed soon!@@OSim42
@BirdDawg1980 9 ай бұрын
It's pretty amazing that everyone finished it safely. That was some pretty intense racing! I love ripping the top at Michigan!
@pwi-studio 9 ай бұрын
i love it - if you google for good vibrations discord - you will find other guys doing it - but i never saw it on a playseat challenge - just cool
@vsm1456 10 ай бұрын
$60 for a spring is a horrible rip-off. vibration isolators of similar strength (used for air conditioners and big fans) cost a few bucks per piece, so you're looking at no more than $20-30 for a set of 4
@OSim42 10 ай бұрын
I also think it's expensive, but for lack of better option, that's the only one I found on the "internet". If you happen to know a place that sells such item, please help the community by providing such info..! (so more ppl can afford to do it). Thanks!
@vsm1456 10 ай бұрын
@@OSim42 I see youtube deleted my comment. I'll try again. Yeah, I understand how it can happen, took me a while to find the springs. I guess my point is more about Slip-angle set being overpriced because it's not cheap either, at all.
@vsm1456 10 ай бұрын
@@OSim42 Now, about how to find them yourself, I couldn't find a link that anyone can use and buy. You probably would be more lucky looking in your local/your country's stores. Put something like "spring vibration mount isolator hvac" (in different combinations) in a web search and see what comes up.
@vsm1456 10 ай бұрын
@@OSim42 Oh, come on, another deleted comment. /o Now, about how to find them yourself, I couldn't find a link that anyone can use. You probably would be more lucky looking in your local/your country's stores. Put something like "spring vibration mount isolator hvac" (in different combinations) in a web search and see what comes up.
@vsm1456 10 ай бұрын
@@OSim42 It's getting ridiculous, three comments in a row deleted. Now, about how to find them yourself, I couldn't find a link that anyone can use. You'll probably be more lucky looking in your local/your country's stores. Search for vibration isolator or spring mount or any other combination of these words, can also add hvac because that's where they are often used. Also take a look at what load they are designed for so you don't end up with too stiff ones.
@MIMCKMedia 10 ай бұрын
Thats probably the ugliest Rig i´ve seen on KZbin :D
@joseppc6802 10 ай бұрын
Understandable enough!!! Thanks
@phracer 10 ай бұрын
Tks for the video, Ive a race in this track this week and now Im working on the car for the oficials
@OSim42 10 ай бұрын
Just know that the setups this season is way different than what I had on that race, so it may end up being a whole new kind of race. Wish you well this week!
@phracer 10 ай бұрын
@@OSim42 Anyway, your race line and adjusts is more than enough for me to start training
@phracer 10 ай бұрын
@@OSim42 Thanks again.