I purchased a digital caliper, purchase some on the web that were similar, but a little larger, took them to a machinist, and had them turn it down, I don’t remember what they were off of, but it was difficult to find ones that were similar

@@jerryterburgh9425 In your comments you mentioned they were off of a Ford 8240. What about the ball bearings for the spindles? Did you just measure as well? What had to be machined down? The king pin shaft to slide into the tractor?

I will bearings in the hub were the same, it’s just the spindle shaft itself was bigger in diameter, and longer,

Stupid auto, correct, I always seem to forget to check that

@@jerryterburgh9425 For the spindle shaft after it was machined, did you recall what bearings you used? Thank you for helping me with this btw!

Thank you. My brother got one that sat for 10 years and started it right up. He hauled it to his camp and there is sat for 2 years. He just gave it to me yesterday. So I'm all fired up getting ready to get it working right then ran into this video which is really a buzz kill. lol Thanks for the positive reinforcement.

Oh yeah, it came from the factory as a backhoe and was first owned by the township.

@@onenewworldmonkey mine was a skip loader from the factory with a hydraulic top link and. Hydraulic adjuster on the lift bar. Wish I still had it

Most of the problems I think we’re just from lack of maintenance, very strong tractor I really liked it.

The part numbers are on the bearings, you can get them from any auto parts store.

I believe if you’re going to fix something, you should fix it right and paint it, that way it’s a forever fix, right now I am doing a ground up restoration of a power king 1614, fixing and painting every part as I go, I have two videos on that already and will be making more as I go.

Yes, but you can get them from Home Depot and lowes as well, they have free shipping to store, they also have a cover for the lines now, I believe the part number is MGL450, good luck.

The pyramid as you see it or just cover stones, the actual structure is underneath, there is proof of this you can see on the web they have removed stones from the top exposing an elaborate doorway, as far as the coral castle goes, anti-gravity is already being used, you can see proof of this in my United States space force video, I am not the first one to accomplish this as far as I know I am the third.

If the fan shroud is still on there you will have to pull the radiator, if not you can do it

I know how you feel, we live in constant pain, its hard to live with pain every day, I don’t get much sleep, just take one day at a time and make the best of it, keep active that helps, have a great day

@@jerryterburgh9425 hi there Jerry im reaching out to you and Im trying to find a solution fkr this problem. The best I have found is something called 3 point traction by cbp chiropractors. Please please please answer this message. Thank you

@@mattinfinity1623 , hi Matthew, unfortunately there is no solution for this problem, I’ve been to pain clinics, physical therapy, spinal fusion, unfortunately if you have this problem as well he most likely have degenerative disc disease on top of it, because I do, doctors are great for taking your money, but no one has any solutions that I’ve seen and I’ve been living with this for more than 10 years, I have six degenerative disk, in my spine fusion has failed, I have done a great deal of research on this problem, and there virtually are no solutions, a chiropractor Will gladly take your money but they will not be able to help you at all, I have no advice for you, I just have to live with it but it’s tough, I don’t even sleep in a bed I have to sleep in a recliner and have for a very long time, I have a jade stone heating pad I sleep on, that helps with the pain a lot.

@@jerryterburgh9425 hi Jerry, I have had mildk scoliosis since early high school. They say that flat back syndrome is comorbid with scoliosis due to the rotation happening at the lateral curves and this flattens the spine. I have both conditions. I have also got two herniated discs L5 S1 and L5 L4. The orthopaedic surgeon said that I need to get ready for a spinal fusion within 5 years. Well its been 6 years and Im still hanging in here with the pain! I dont want to be operated on and will only do so as a last resort as spinal fusions can cause too much play at higher vertebrae and this causes further degeneration anyway. The spien needs to move. Have you checked if you have ankylosing spondylitis? Its the fusing of the spine that usually starts in the middle of the back. A lot of people have beaten the pain of the condition by eliminating starch completely and it takes away the inflammation which actually causes the fusing of the spine in the first place! I checked to see if I have it with an HLAB27 gene test and I was negative. Please get checked! You say that chiros will take your money but I will ask you again... have you seen a cbp qualified chiropractor that does 3 point traction which is made to correct the loss of a lumbar curve! They also work on loss lf thoracic curve as well.please check out Dr. Walter Salubros videos on youtube. I am thinking of going to see him in Canada even though I live in Jersey in the Channel Islands. Have you looked at muscle imbalances? They say that tight hamstrings, weak back extensors, weak iliopsoas, tight abs is the muscle imbalances causing this problem. I seem to have an anterior pelvic tilt thou. Which pelvic tilt do you have? Thank you Jerry!

Jerry the operation that is available for this condition is called pedical subtraction osteotomy. Its another option for us. But preferrable I think for both of us is to avoid the knife! Im going to have a video call with this Doctor Salubro and will see what his fees are. These CBP chiros seem to have results!

Yes there is a dip stick on the bottom of that breather on the left side about 2 feet long, I had the backhoe connected to the 3 point, it worked well, very strong, very heavy, well built tractor, I only sold mine because we moved 2 states away, to big and heavy to ship.

I had some luck at the New holland dealer they bought out ford, you might try finding a name and part number on the bearing, research it that way, the part number may change a few times, some of the parts where made by other venders, and fit more than one tractor, good luck, they are a nice tractor, sold mine for 12 thousand, he was happy to get one.

@@jerryterburgh9425 I’ve tried to find any type of number on the bearing but all it has is there abbreviations for Ford motor company. The way I understand it now fiat owns ford new Holland possibly with CNH. Either way they’re not in the USA. I will probably just give up and put the old bearing back in and sell the tractor because it’s just too difficult to find parts. Thank you for the quick response.

Call all states Ag 866-609-1260 it shows they have 2 types in stock, new holland bought ford out, I’ve ordered several parts from our New Holland dealer, costly but they got them,@@joereinhardt5358

I did find it easy to use, I still have my computer but home pc’s are getting out dated, I decided to get the new 2020 iPad, so far I love it

Exactly. But, it's only cheaper if they put no value on their own time. :)

I’m interested to know if you found the replacement parts and if so where did you purchase them? Thanks, Tim in northern TN

I looked up the spec sheet for tie rod ends on the computer, but you may be able to get one from the auto parts store??? it look me two or three days, to match up the parts I needed to the spec sheet, and got the part number that way, I took the part number to the auto parts store and they told me what it fit. it was a lot of work.

I believe some of us here on Earth are descendants of the Ancients ( the people on the moon ) that's why Ed's telescope points towards space, that's how Ed knew how to create his neutral gravity field, I'm like Ed, I don't like humans very much, I've been told I'm from a race called Sacaren, you can't find that word anywhere.

@@jerryterburgh9425 Jerry, study the Polaris telescope at Coral castle, look above and below the 1940, If you can see what I see I will show you more.

you will need a larger screen monitor size and some descent resolution.

The pipes will sweat in the summer when using the air conditioning, they do need to breath.

It's pipe used for electrical, any electrical supply house or home improvement center.

Jerry, did you study the tin plate in Ed's workshop?

@@raulburgos5145 The area is solid coral or rock, no place to get a good ground, you would need to use it for a grounding plate

Jerry, I'm talking about the the square piece of tin inside the the wooden frame you see in Ed's workshop, zoom in on the piece of tin and see what is etched into it.

@@raulburgos5145 Yes I've seen it, there are two, its a wash board from 1920"s, one with the frame one with out, one is flat, one is ribbed, common item for cleaning your clothes in the 20"s

@@jerryterburgh9425 look closely you may have to zoom in, there's etching of images in the tin.