At the current rate of video releases it will be 20 years before we see how to code a basic synth.
@robertparenton747024 күн бұрын
Thank You! Hope to see videos on Daisy Patch. I have received the module today.
@electrosmithco23 күн бұрын
Nice, we hope you enjoy the new Patch!! And you can still follow these videos but skip the hardware section since the components are already connected on the Patch :)
@daytrace4635Ай бұрын
can you do an encoder, Im finding this nigh impossible lol?
@electrosmithcoАй бұрын
A video on encoder is planned for sure!
@daytrace4635Ай бұрын
@@electrosmithco Well now ide is stating many conflicts even though it was just working yesterday 🙃. Did a polling method for the encoder but was late last night, did same code and ide freaked out on me lol 🤷♂️
@daytrace4635Ай бұрын
@@electrosmithco So apparently the DaisySP library will not download via zip, not really understanding why considering daisyduino was easy peasy lol
@electrosmithcoАй бұрын
@@daytrace4635 Feel free to share the error message that you're getting on the forum or discord. Would be happy to look at it closer with you :)
@daytrace4635Ай бұрын
@@electrosmithco Ended up fixing it, had to do add a file to the sketch as the library itself isnt valid in ide, added the daisysp h file and it worked but seems I have to do that for every sketch and the library still doesnt show up as a contributed library. Ill get on the discord when I get this done tho 😁👍
@FrootyRecordsАй бұрын
Hi, thanks for the video. In the button.Init clsss , I believe there is a way to set up a button as a ''toggle mode'' switch so that it changes state with each press, however, the syntax for this is unclear to me. could you please type us an example of how you would set the 'init' statement to do this? . Thanks. Dave.
@electrosmithcoАй бұрын
I recommend checking out the SimpleButton code in Daisy Pod's example :) It shows how one button is set as momentary switch for turning on/off LED 1 and another LED as latching switch for toggling LED 2. So the key is the difference between `Pressed()` and `RisingEdge()`.
@seisetteАй бұрын
I'd like to understand what that for loop is cycling on, or what is MyCallback. Basically understand more thoroughly the code please.
@electrosmithcoАй бұрын
Yes, I have been wanting to make a video on that to explain thoroughly! It would be the next video on this DaisyDuino series.
@markparfittАй бұрын
to get started with this setup do I need an unsoldered or soldered daisy?
@electrosmithcoАй бұрын
Just for blinking the onboard LED like in this video, you can get the unsoldered Daisy Seed and start right away. But once you start making sounds, you're going to want to solder header pins to the Daisy if you do end up buying the unsoldered version. This tutorial (kzbin.info/www/bejne/fpacqoiipbZseJo) will give you an idea as to how a soldered Seed is used for outputting sound out of an audio jack.
@greglmna75782 ай бұрын
Hey, great video. I am learning more about pure data and I wonder how I can assign physical knobs to variables in the pd patch. Do you have resources in this topic ? Thanks 😉
@electrosmithco2 ай бұрын
Thank you! A thread called "Quick Guide on Setting Up a Custom JSON File for pd2dsy & Oopsy!" on the Daisy forum would be a great place to start!
@alextkalenko2 ай бұрын
Is somewhere a beautiful video like this or a doc but for PD2Daisy?
@electrosmithco2 ай бұрын
Glad you liked the video! A thread called "Quick Guide on Setting Up a Custom JSON File for pd2dsy & Oopsy!" on the Daisy forum would be a great place to go next. And searching/asking around the Daisy forum and Discord are highly recommended :)
@alextkalenko2 ай бұрын
@@electrosmithco Thanks for the answer. I'm hoping to someday find a course or workshop, that would be nice and time saving :) Cheers!
@daveharwood28432 ай бұрын
These videos have been awesome! I love your delivery, providing theory, electronics and programming separately. Great for teaching this old dog 😅
@electrosmithco2 ай бұрын
We appreciate the kind words, thank you!! So glad to hear that these videos have been helpful on your journey :D
@Crazyfistish2 ай бұрын
Loving all of these videos, having a lot of fun with my own daisy! Would you consider doing a video about digital audio output instead of analogue? I know that it has SAI but have no idea how to get it to work at the moment. Thanks!
@electrosmithco2 ай бұрын
Glad to hear that you're having fun with your Daisy!! We can look into if digital audio output is possible with DaisyDuino! Thank you for the suggestion :)
@user-dd9vk1bm3u2 ай бұрын
Hello! Tell me pls, can i implement any form of built-in samples by storing them in built-in memory of daisy seed?
@dogme6663 ай бұрын
I'm sorry , I'm usually really positive in my comments , but this is the most unintuitive board on the market... I've been using , teensy , axoloty , esp32 boards for years and the daisy , though very promising , is extremely hard to setup in comparison , the pcb has barely any information on it , its extremely sensitive .... this board bums me and my students out , and some of them are far more tech savvy than me.. i hate posting this comment...
@electrosmithco3 ай бұрын
We appreciate your honest feedback and are sorry to hear that you and your students did not have a positive experience with the Daisy. Please feel free to share the part of the setup we could have been clear in this video. And let us know more about the board being sensitive. We are currently working on making the experience of using the Daisy more intuitive so your suggestions (especially in educational context) will be valuable. Thank you. And if you ever return to using the Daisy for your class, please don't hesitate to ask questions over on the forum and discord. We along with the community members are always happy to answer!!
@dogme6663 ай бұрын
@@electrosmithco the tutorial is fine , we solved everything , but the process is really hard , i might try to do a one click installer script for windows , and pin numbers on the pcb would make life so much easier, also the process for connecting it to maxmsp didn't work for me so ill have to troubleshoot that as well , to be honest I'm going to continue using it because of the form factor and features , but i don't feel comfortable recommending it to people , especially new people in the domain (the alternatives are much more inviting for beginners , i don't know if that's your aim but i would love to use this to teach children , for now i use the teensy for workshops) , btw i have the rev7 , also I'm sorry for the firmness of the previous comment , i was frustrated with the amount of steps needed to set it up . what you do is great and i appreciate it a lot a lot , and please don't stop , i hope this comment is more productive than the previous one .
@dogme6663 ай бұрын
@@electrosmithco the tutorial is fine , we solved everything , but the process is really hard , i might try to do a one click installer script for windows , and pin numbers on the pcb would make life so much easier, also the process for connecting it to maxmsp didn't work for me so ill have to troubleshoot that as well , to be honest I'm going to continue using it because of the form factor and features , but i don't feel comfortable recommending it to people , especially new people in the domain (the alternatives are much more inviting for beginners , i don't know if that's your aim but i would love to use this to teach children , for now i use the teensy for workshops) , btw i have the rev7 , also I'm sorry for the firmness of the previous comment , i was frustrated with the amount of steps needed to set it up . what you do is great and i appreciate it a lot a lot , and please don't stop , i hope this comment is more productive than the previous one .
@jermainewakeup3 ай бұрын
Hey! When trying to execute the "task build_all" command, I'm met with this error: Error makefile 118: Command syntax error Error makefile 126: Command syntax error Error makefile 134: Command syntax error Error makefile 183: Command syntax error Error makefile 185: Command syntax error Error makefile 204: Command syntax error Error makefile 206: Command syntax error Error makefile 209: Command syntax error Error makefile 216: Too many rules for target 'build/%.o' Error makefile 219: Too many rules for target 'build/%.o' Error makefile 243: No match found for wildcard '/*.d)' Error makefile 243: Command syntax error *** 12 errors during make *** * The terminal process "C:\Program Files\Git\bin\bash.exe '--login', '-i', '-c', 'make'" terminated with exit code: 1. * Terminal will be reused by tasks, press any key to close it. I'm on Windows if that helps. Thank you!
@electrosmithco3 ай бұрын
I want to double check with if you're going to File -> Open Folder and opening the Blink folder.
@jermainewakeup3 ай бұрын
@@electrosmithco Yes this is the Blink folder, but I've also tried other examples and they all greet me with the same error.
@electrosmithco3 ай бұрын
@@jermainewakeup In case other people run into similar issue, I'll share the solution that you posted on Discord. "...it turns out I installed RAD Studio, an IDE, which has its own MAKE integration. Uninstalling that and installing GNU Make worked out for me."
@Octovolt-os2up3 ай бұрын
If you are still taking requests for videos, I would love to see a video about creating a delay effect, or even a walkthrough of the delay example code. Thanks for all your great work!
@electrosmithco3 ай бұрын
Yes! Delay tutorial would be awesome. Thank you for the suggestion!!
@Dave2DVlogs3 ай бұрын
ive been looking for something like this for ages, hope to find time to get into this soon thanks for these tutorials!
@electrosmithco3 ай бұрын
Happy to provide these tutorials! And we hope you find the time soon!
@barbierthomas83223 ай бұрын
I would love to see a video about dsp sound generation!
@electrosmithco3 ай бұрын
Yes!!
@elipagnani45533 ай бұрын
Any word on whether RNBO works on daisy?
@electrosmithco3 ай бұрын
RNBO doesn't work with the Daisy at the moment.
@berzerker174874 ай бұрын
These tutorials are phenomenal! Great work and thanks for making them!
@electrosmithco4 ай бұрын
We're happy to hear that, thanks!!
@andreas-wismann4 ай бұрын
Great tutorials, thank you! May I ask if it‘s necessary to have the analogReadResolution(16) instruction placed in a loop, or would it suffice to have it called once?
@electrosmithco4 ай бұрын
Good catch! You can place it in void setup(). That was my bad in placing it in void loop()!
@NaokiApri4 ай бұрын
What if i need more knobs than adcs available?
@electrosmithco4 ай бұрын
Multiplexer will be your friend :) We have a tutorial post on our forum, so I highly recommend checking it out. If you search the word "mux" or "multiplexer" that post should appear.
@TheOleHermit4 ай бұрын
Hi Takumi! Great to see you back! Looking forward to this series. Just completing my latest T4 Laser Synth ver VI PCB. 😎
@electrosmithco4 ай бұрын
Good to see you here :) I hope your laser synth project has been coming together since we last talked.
@TheOleHermit4 ай бұрын
@@electrosmithco Thanks! It just keeps evolving beyond my original expectations. Knowledge = creative potential = learning = knowledge. It's an endless feedback loop. Hoping for some Yt demos this summer...ish.🙄
@TR-7074 ай бұрын
takumi needs a x2 raise, a beach vacation and to make videos everyday
@electrosmithco4 ай бұрын
Thank you for the kind words! :)
@draconianrhythms4 ай бұрын
Yeeeeaaahhh content ❤❤❤
@electrosmithco4 ай бұрын
Thanks!! 🙏🙏🙏
@chrisegonmusic4 ай бұрын
Loving these. Looking forward to finding out about Daisy accepting instrument signal as well as line. I think I know how it would work but always good to have someone confirm. Thanks for all you do 🌼
@electrosmithco4 ай бұрын
Yes!! We have been wanting to make videos on op-amps for sure!! :D
@chrisegonmusic4 ай бұрын
@@electrosmithco great!
@draconianrhythms4 ай бұрын
@@electrosmithcoI’ve been doing some research into Op-Amps recently, it would be so cool to see how you explain them. I’m sure you’d do a great job of talking through the different configurations (of feedback loops etc).
@chillywilson4 ай бұрын
I think instead of hand holding normal arduino electronics once a month, where there's already plethora of tutorials, it might be more benifical for your target market to up the game a bit. Like multiplexing connections to the seed lib, or handleing instrument inputs. Just some food for thought, I would assume most of the people buying a seed would be people that are upping their electronic skills, not starting them. love the product, keep it up either way.
@electrosmithco4 ай бұрын
We appreciate your feedback!! The electronics basics is pretty much complete now with this video, so we can start covering a more Daisy-specific electronics topics :)
@chillywilson4 ай бұрын
@@electrosmithco excellent so cloning an op1-field next month right ;P
@Daruma_Studio4 ай бұрын
I appreciate some intro/entry level stuff but more specific to Daisy Seed's strengths so, instead of Arduino code, its more in Max MSP or PureData or other Daisy Seed-unique IDEs.
@electrosmithco4 ай бұрын
@@chillywilson Hahaha!
@chillywilson4 ай бұрын
@@Daruma_Studio i feel like plugdata to seed tutorials are going to be thing that can propel us into a new maker boom
@corticallarvae4 ай бұрын
Hey were did the patch info move to I was on slack but I don’t know if it moved to GitHub it’s not terribly specific anymore….
@electrosmithco4 ай бұрын
Are you referring to the Daisy Patch schematic? If so, you can find it on its product page.
@corticallarvae4 ай бұрын
Yes but I meant more of the software side
@electrosmithco4 ай бұрын
@@corticallarvae You can access repos such as libDaisy, DaisySP, DaisyDuino, and etc if you go to GitHub electro-smith. If you were looking for something specific, please let us know :)
@jeffro.4 ай бұрын
I just discovered this Daisy. I play guitar and write music (in addition to electronics), so I'm thinking about building effects processors. (In fact, a search for which processor is best for music processor is how I found Daisy.) I'm looking forward to getting started! First, I need to get some home automation projects done, though,,, 😎
@electrosmithco4 ай бұрын
Sounds like Daisy is indeed what you were looking for!! :) Please keep us posted about your project if you do end up getting it!
@junronglu99114 ай бұрын
Is it possible to use DSP on a normal stm32? I really want to try it but it just cost too much on shipping...
@electrosmithco4 ай бұрын
You can reach out to us about other shipping option via email, thanks!
@thorstenweimar11904 ай бұрын
Thank you for opening a new door for me, I am very excited about PD and how to work with Daisy and Electrosmith! Keep on doing this great work...I just installed PD and start with your tutorials 👍
@electrosmithco4 ай бұрын
We hope you enjoy your new Daisy journey!! :D
@suisjefou4 ай бұрын
Hello, I think it is very very (veryyyyy) crucial to make a simple tutorial to just plug a potentiometer to the breadboard and make it correctly control anything on the patch. I struggle doing it reading everything on forums trying to make my own json. But even with the pod I think it is very important for your platform to show people what to write on the param of the gen~ to make the knob control things.
@electrosmithco4 ай бұрын
We greatly appreciate your feedback. Yes! A video on this topic is much needed, and we have been wanting to make it soon.
@roberto43122 ай бұрын
Yes please, this is absolutely needed here too!
@UnderDriven174 ай бұрын
I'm getting this error after 'task build_all': Executing task: make Error on line 89: expecting target : dependencies The terminal process "C:\Program Files\Git\bin\bash.exe '--login', '-i', '-c', 'make'" terminated with exit code: 1. I have never used VS Code before, and I tried to follow your example but it's not working. When I open blink.cpp I am asked about opening git repositories--do I need to do this? I tried opening all of them but I still get the error. I don't want to make any changes to the repository files, just compile blink.cpp.
@electrosmithco4 ай бұрын
I'm sorry to hear that you're encountering an issue. You can just click X when that window pops up upon opening the blink example folder. I unfortunately haven't seen that error, so I recommend making sure that you did not miss any step. If it's still an issue, please feel free to start a thread over on our forum as it's easier to troubleshoot there.
@flywittzbeats40085 ай бұрын
Our hero has returned to bring us synth goodies! haha. Best tutorials on the internet
@electrosmithco5 ай бұрын
You're far too kind, thank you :D
@TR-7075 ай бұрын
super exciting. all of my daisys arrived and i am ready to follow along
@electrosmithco5 ай бұрын
Let's goooo!! :D
@RixtronixLAB5 ай бұрын
Creative video, thanks :)
@electrosmithco5 ай бұрын
Thank YOU for watching :D
@usmanfr25 ай бұрын
Unknown USB Device (Device Descriptor Request Failed) . 4:25 unable to see the "DFU in FS mode" option in the dropdown menu
@electrosmithco5 ай бұрын
Please make sure that you put your Daisy into bootloader 0:37. And trying out different cable is usually a common solution too! Let us know if it's still not being recognized.
@usmanfr25 ай бұрын
@@electrosmithco . I am sure that the daisy is in the boot loader mode . also tried all ports and different cables . Each time i press the bootloader sequence my PC gives warning "USB device not recognized" . the terminal says Warning: Invalid DFU suffix signature A valid DFU suffix will be required in a future dfu-util release No DFU capable USB device available make: *** [../../libDaisy/core/Makefile:344: program-dfu] Error 74 * The terminal process "G:\GIT\Git\bin\bash.exe '--login', '-i', '-c', 'make clean; make; make program-dfu'" terminated with exit code: 2. * Terminal will be reused by tasks, press any key to close it. .................................................................................... is it possible that my PC has USB 2.0 ports and The communication protocol of Daisy requires USB 3.0 ??
@usmanfr25 ай бұрын
@@electrosmithco . I am sure that Daisy is in bootloader mode . Tried different cables and different ports as well But no luck . My pc has USB 2.0 . Is the daisy communicating on USB 3.0 ?
@electrosmithco4 ай бұрын
@@usmanfr2 USB 2.0 should work. Which version of Windows are you using?
@usmanfr24 ай бұрын
@@electrosmithco . I am using windows 10 Pro
@youbobbotube5 ай бұрын
You can’t drop these fast enough for me. Thank you so much
@electrosmithco5 ай бұрын
There will be more tutorials soon! We appreciate your waiting!
@robertparenton74705 ай бұрын
Thank You! Been Waiting!
@electrosmithco5 ай бұрын
We hope it was worth the wait! We started dedicating more time for videos, so your wait should be shorter from now on :)
@peppercrack52115 ай бұрын
Yessss! Tutorial day!
@electrosmithco5 ай бұрын
Wooo! We hope you enjoy it!
@ewanbristow5 ай бұрын
Babe wake up new a new Electrosmith video dropped
@electrosmithco5 ай бұрын
YESSS :)
@toolzshed5 ай бұрын
So cool
@electrosmithco5 ай бұрын
Thank you so much!!
@freeelectron82615 ай бұрын
Nice work, looking forward to more cool tuts! Electrosmith rocks! Or maybe it beeps and squarks?
@electrosmithco5 ай бұрын
You're in luck because we just now posted another new tutorial!! Bloops is acceptable too ;)
@MikeHudsontek5 ай бұрын
Yes! you're back. This is what we want :-) thanks
@electrosmithco5 ай бұрын
Wooo! And we juuuust uploaded a new tutorial!
@freeelectron82615 ай бұрын
Great tut - got daisy blinking on a windows system.
@electrosmithco5 ай бұрын
Glad to hear that!! Now the fun begins :)
@shke45195 ай бұрын
is there any way to run daisy c++ code on the vscode terminal? like emulating the chip?
@jumpstar90005 ай бұрын
Very cool. I'm just about to order some to play with. BTW, have you seen CMajor. It would be really cool to support that.
@Vcg1085 ай бұрын
Would one be able to pass audio through the daisy ( line in - USB out ) without effects ? In effect use it like an interface
@electrosmithco5 ай бұрын
From my understanding, USB audio is not a feature with the Daisy, but I think we are adding it in the future if I remember correctly.
@gcb7135 ай бұрын
Awsome, thanks!
@electrosmithco5 ай бұрын
Thank you for watching!
@draconianrhythms5 ай бұрын
Excellent as always. Bring on part 2 ;)
@electrosmithco5 ай бұрын
Currently writing the script for the button tutorial :D
@draconianrhythms5 ай бұрын
Awesome man ❤ would you consider maybe one day covering what other components you’d need to add to this setup? I’m talking about op-amps here really; I think I know how to hook them up but seeing an expert do it would be great. I know ES offer boards with all this stuff already, but I’m coming at this from a very low-budget point of view haha. Just a thought .. cheers 🙏
@electrosmithco5 ай бұрын
@@draconianrhythms Op-amp tutorial for amplifying instrument level (like guitar) to a line level, correct? Yes! I have been meaning to make a tutorial like that for a while.
@draconianrhythms5 ай бұрын
@@electrosmithcothank you .. that’s great news
@sound.workshop5 ай бұрын
awesome tutorial!
@electrosmithco5 ай бұрын
Thank you so much!!
@chillywilson5 ай бұрын
yes, custom hardware tutorials. I'm stumbling on plug data json file/heavy stuff, I'd just wish there was a table of plugs and their corsponding hardware you can pin them to.
@electrosmithco5 ай бұрын
If you want to learn how to put together a JSON for custom hardware configuration, we wrote a guide titled "Quick Guide on Setting Up a Custom JSON File for pd2dsy & Oopsy!". We highly recommend checking it out. And we would be happy to answer any question that you have there.
@chillywilson5 ай бұрын
@@electrosmithco I was looking for somthing like that, the forum search might need more tags in them, I came up blank seaching "plugdata harware mapping". Thank you I was able to find it now. Would you know if there is a list of matching hardware to plugs? Like if I want to put various sensors or like 5110 displays, what plug would work or not at all?