How did you tighten it to 55lb if it moves? You edited the video and skipped that part

Hello, Are you interested in testing our products? We would like to invite you to test the Rear Windshield for your 2019 Honda Talon 1000X

I also own a 2016 maverick, what size tire would you recommend?

Great video Sir….thank you so much, Let me ask you this if I can… My 2018 ranger 900 XP will maybe do this once maybe twice per year it seems it won’t start exactly how you showed in your video but out and roll the machine forward or reverse maybe a couple of inches, get back in the machine, put it in park step on the brake and she will start then it’ll start, however now it seems to do it much more frequently and If I try to roll it. It doesn’t work every time I roll it forward or backwards So I’m not sure if it’s the brake sensor switch or if it’s a flat spot somewhere do you talk about this in your other videos that you can direct me to? Ty Kevin

Can u send me pic of where ur doors fit the back glass from the side angel I think I have mine on wrong

6:44 25:05 31:29 34:01

Really couldn't see what you were doing.

How did they work out for you?wouldn't 8 inch carbide be better?

I replaced the upper shaft and I installed this motor and stopped working. I got the ECU 25 code only after using the snowmobile for 2h, backup 10 times maybe. I will investigate but pretty sure it's not strong enough.

What's the part number or where did you order the kit from

the better mousetrap!.................................................................................but my sister said her "rabbit" worked well installing them in her harley tires.....................................................................................go figure

We’re having the same issue we already fixed the side case but now it won’t slide back in place does that pre load nut need to e tighten back up to get the case to slide on.

We’re having the same issue we already fixed the side case but now it won’t slide back in place does that pre load nut need to e tighten back up to get the case to slide on.

Obrigado pela ajuda estamos tentando retirar essa peça não temos as medidas deste saca

What brand was the correct tool

Great video

Helpful video. One thing I had found was, the rear work light harness will not go through the cab. How where you able to perform that job? No openings found. Thank you in advance.

Where did you get your wheels from ?

Why are americans so obese

Chad! Your video just saved me hours of chasing my tail and troubleshooting my Ranger XP1000! I had this issue and I fixed it today with your solution! Thank you very much!!!!!!

I just did mine on a 19 XLT. You are right, fronts are a pain but the rears were easy. But it was worth it. They look great! Great vid! Thanks

Trump 2024 🇺🇸

I went on Polaris’s website and they said this part isn’t correct for my 2018. They say #4081117 is the right part and looks more like the OEM. 🤨

What does indexed properly mean?

Very cool

I just put on my Tusk fenders my self, I used bolts along with the self taping screws, they look great, I wouldn't trust push pins if I were you.

Get rid of that horrible music.

36 inch pounds maybe, now way 36 foot lbs on that plastic housing

That looks great. I used POR15 on the engine and transmission for my car and I was very impressed with how it flowed out after being brushed on.

Did that positive scrub with the wider front end make it steer funky?

Thanks Jeff. Could not have done successfully in a decent timeframe without your help. I was totally lost with the brackets and u-bolts before watching this! Much appreciated.

Trash... what good does it do to show breakdown if you're gonna break brackets to remove coolant tank?

On my Ram, was no way to tell which end of the plastic goes up. Nothing in the generic instructions. What I did was put the thinner part at the top, and where it curves out like a fish belly, that went towards the rear. Frankly, I doubt many people actually get the plastic on in the right spot, i still can't say for certain I did either.

I just installed Husky on my 2005 Rm 3500 Dully on the front. You can not drill the plastic without removing the tire, BUT you can heat up a nail with a torch and melt a hole with the tire on the truck. Worked well.

big problem with this infomercial is the clips installation. Cant see anything you did or how.

I swapped mine out. Rotated the top section 180. Do not hear any noise and get ECU 25 code after pressing reverse switch. Any thoughts what to start looking at?

Have you ever replaced standard seat belts with aftermarket 4 point in a pre 2015 dise by side rzr? Is there an engine no start connection that has to be fixed if removing oem belts?

What are they made out of .Plastic or tin.

Bravo, thank you, I’m so tired of punching the brake pedal. Even a girl can do this

Thanks for the video! im done trying to clock the wheel inside to a spot that isnt stripped out. Im wondering if the 742-114 (Left front window motor) vs the 115 (left front) will reverse the polarity and skip that step.

If there is wear (missing metal) why would you want to grind away more metal. Makes bigger tolerance then before you ground it down. Doesn't make sense.

So you didn’t need to bleed after changing huh? I have an 06 500 fi and the switch is under behind SS fender in a pita location.

I couldn't figure it out until I watched your video,,, great work

You did not have to reverse the wires for the polarity. All you simply have to do is remove the 4 bolts on the actuator again and turn that magnet housing 180 degrees. Done.

Dude man this is a great video I have the same unit . Learning lots from yah. I may some some questions . Is that possible thanks !! My unit is reading temp . I didn’t see any leaks. how do we see is the reservoir is low ? Is there a specific coolant pre mixed ? Tanks !

Thx , would it be similar install on a 2020 ranger 500 .. just had this today,break lights stay on trying to crank then clicks. I disconnect battery to get break lights to go off

Could you do a winch Install video on a 835R,

Whats this kit gonna help me do? Is it a performance part or just replacing the old ?

Where else would a heater get there from you crazy off like a heater's gonna get cold air from the outside what were you thinking God-bless everyone

Wtf idiot doing on that Yamaha lmfao it's guys like him that cause accidents!