Hi my machine is filled with water and has been stuck on the drain and spin cycle. What do i do

Mine doesn't even spin. It seems stucked.

Holy cow. I know I’m an idiot for doing this but I put a tiny Phillip bit that would go on a chuck or in a bit holder in there and it was jammed in there good. I couldn’t even pry under it. So what I did was, hear me out, I used a hammer to bang down the tip some, I used some pliers and was able to get a grip on it and pull it out. Thanks for the video my good sir. Now hopefully I can get it reassembled and never make that mistake again

Should the bottom of the agitator be completely tight down?? Mine keeps coming loose from the bottom after every load but all the components seem fine?

What if the splines on the wash plate are intact and the it still spins freely???

Yeah.......I just happened to have a steel press in my garage. Thanks.

But what if the smoke is much heavier and was wet from fire hoses? Plain dry sponges or water doesn't work. Some kind of chemical is needed - what would you suggest?

Start at reg 1 left to heavy 3 to right casual 1 click left light 1 click right reg Start

My daughter has a 1970s frying pan and it’s kind of retro and she likes it. However, the handle comes loose all the time. And when I say all the time, I mean, she comes home from college for a long weekend, uses it two or three times and it’s loose. I was going to use Loctite blue, which is removable thread sealer. I also thought about using Red which is permanent thread sealer, but to remove it you have to heat it up. Since the frying pan gets a lot of heat, the red thread locker will probably just be loose anyway. I never heard of using RTV gasket maker however, the Black is pretty good. The only thing that threw me was when you said to use blue over the black. The blue RTV is for water applications only, basically for water pumps. Everything else I use our RTV red or black for oil pans, valve covers etc. so I don’t even bother using blue at all. I’ll give your method a try using the black and I’ll let you know here how it worked. I just don’t see how it would work. It’s just a gasket maker, not an adhesive. You’d probably be better off using JB Weld epoxy, maybe I’ll try that instead. Either way, I’ll come back here and post what worked, if anything. Thanks for the video. Now you have at least one real long comment!!

I suddenly want to play Super Mario World and fix Appliances

I got the ring, washer and spring taken out but that piece wont slide off. same impact driver too. maybe diff year or something.

Stay away from anything Whirlpool. They have gone so downhill its sad

Thanks it works bless up

I am glad I found this video!!!! Replaced the actuator but it’s still making a loud buzzing sound. What do I do next?

All the lights are blinking green. I presssef start and they are still blinking and it isn't letting me cancel.

Great job!! Thank You!

Thank you for your help sir. Sincerely, guy from Kansas.

Hi, I have a mower that maybe 5% of the time when going from reverse, full stop to then forward will click click click. If I are in the brake go to neutral and then go back into forward it works. Once the mower is in gear, it never does anything wrong or pops out: almost like the linkage doesn't do what it's supposed to some of the time. Any ideas.

Great video!!!

Thank you I got my bit end unstuck with your help! ❤️

Thank you for sharing your wisdom, My Whirlpool Cabrio did not come with them but I am putting them on. After replacing the plastic hub to metal and new rods still shook but for they money can't hurt I will give it a try. Crazy why whirlpool did not include them????

Would have loved to have seen you put the new one on but this gives me an idea of what I'm doing now. Thank you. by the way, the annotations in the video kinda get in the way when you're watching, keep that in mind. Is that a 42" cut mower or does that matter on cut size, or will it be different?

Is there a way to turn the drain pump on just using the dial?

Thanks for posting this great idea on cleaning a soot sponge. Brilliant! Do you have a product name or link for the scrubbing pad you use? I'm not sure the ones I'm seeing are sufficiently abrasive to peel a thin layer of soot sponge.

I replaced mine and it was as if I did nothing. I didn’t remove the rods either. After putting in the new rods, I didn’t want to do that again so I said there has to be an easier way. I’m going to get springs with more tension today.

So is he saying agitator had to be replaced or did cleaning solve issue????

The speech is a little bit off from the video, but still easy to follow. Thank you for posting this!

Thanks a bunch 🎉

Thank you so much for the intel! I am about to help someone with this very situation and your advises are very appointed. Question: If the soot has not been cleaned for over a year, does that an effect on the cleaning procedure?

Great job thanks. Can fix mine now.

Thank you!

THANK YOU for explaining. All these videos never say the paint wasn't flat. Thanks for being the ONLY person who explained this

Hello, I was available to remove the spring and the other two rings but the black part that you pull to remove the bit it doesn’t come out

Good video just had your camera the wrong way so picture was small.

Looked like 6 screws not 4. Can just the top 2 screws be taken off?

can it be drained right from the filler valve where you put the gas nozzle in?

Thanks for the video! Very helpful😊

Epson ET-2750 printer shows e/01 error what to do?

Thank you so much

what size springs do you use and where to buy them please

This was incredibly helpful. I think this is the issue for me as well. Same model, didn’t have springs installed.

No paper in rear feed when it has paper help please

Something tells me tge flat paint was a lot cheaper or rental properties. Yeah?

Couldn’t you drill a few holes and force air and alcohol through and the plug up the holes? Woman asking😊

Your “wet cloth in the bottle” was an excellent way to show that air circulation is necessary to dry the wall.

Very helpful. I’ve always had that problem when taking off bolts on pulleys. Thanks

Right on brother I follow your directions it was super simple the bit in the top save my spring from shooting out one time and other than that your direction to where spot on I will follow you

Sorry from the video I cannot under where you have put all the springs, but thank you for your efforts.

I have the ET-2750 and the paper does actually physically jam maybe a little over halfway when getting pulled in. It's never been taken apart. I end up having to pull the paper back out, and then there's marks in the middle as if it's too tight, but that may just be from me pulling. In any case, just wondering if there's a possible fix that's not too complicated. I saw another video where they mentioned adjusting tension on the white rollers in the back, but since I haven't taken it apart yet I'm not too certain.

It’s beautiful 🐠