Hope you enjoy it!

Mine is still working flawlessly good luck

You’re welcome thanks for the watch

Mine has not flaked off and looks as good as the day I sprayed it

It says that in the manual but I was using a thinner stain.

You are welcome

They used to work in HA but I need to redo my HA so I can update it. I am running on a very old version that is not supported anymore.

Never fails lol oh well mine are done now

I absolutely love the whole Govee ecosystem. I do love my lights.

Make sure your screens are not clogged or make sure you are getting a good seal on your glass

@@dmurphy68 thanks. yea, i've tried all of those things and can't figure it out. added a little plumber's tape to the threads to make sure it wasn't the seal. ha! no sure what else to try but I'll take your ideas! Thanks for replying

I keep them at about 3200k and I think they look good. Not to much orange color

There are a lot of places that offer 3d printing. You would be surprised how many people have them. Ask your friends and maybe someone can make them for you. The wiring is easy just turn off your circuit.

7 inch is what I made it I think. I included the file so you can modify it if you need to

They are instant on and they retain the last state they were in.

Yes I used my IPhone to connect.

That is the reason I took the can part out and did it this way

They do connect only to 2.4 GHZ network and I do not see any IP ratings on them. They do have a whole line that is made for outside.

Yes I had my wife’s connected but because mine was done first it connected before hers

Had to reroute them and adjust

Wonder how that can be fixed

Same for my civic it’s so frustrating

Frustrating

Yea I was trying it out on the spindles but didn’t work as good as I wanted

Yes but I sealed it with some silicone when I was finished. It has been in the rain a few times and I have never had it drip down the screws.

@@dmurphy68 Thank you so much!

@@krobertson2453 you are welcome

I do not see an option for it unfortunately

Electric if you are using indoors

Thanks for the tip!

Thank you and yes I still believe this is the best thing I have ever purchased for my chickens. Almost makes them self sufficient. I am working on an automatic water collection system so all I have to do is worry about food.

I didn’t but it would of helped

I have no idea sorry

Thank you for the kind words

You can make automations in the Govee app but I do not think there is a way to sync it with your tv. I have the Govee tv led backlight on my tv. Limited-time deal: Govee Envisual TV LED Backlights for 75-85 inch TVs, 16.4ft RGBIC WiFi DreamView T1 TV Backlights with Camera, Works with Alexa & Google Assistant, App Control, LED Lights for TV, Scene Mode, H6199 a.co/d/gLx5GOm

Yes its possible through the app. You can set up a group and then sync them to the tv light strip .

Cool I will try it out. I haven’t dove to deep into the app yet.

You at least want to kill power to whatever circuit you're installing the lights onto

Sorry I did not see this comment. You only need to isolate the circuit you are working on. If you feel safer shutting off everything that’s your call. Just be safe and make sure you are not working on live electric.

Thank you it was a dark green but didn’t look as good

This was a rental unit not a contracted job. If I remember correctly it was about $250.00 to rent the saw.

All lighting circuits are ran in 14 gauge wire.

@@dmurphy68 I have a few more questions, sorry. What is the minimum clearance needed above the lights, and the recommended spacing between the lights? I'm considering 4 iches above, 18 inches from walls, and 3 feet between each light maximum and 1.5 feet minimum.

They are only a 1/2” thick so they can be installed where a stud is. As long as you have room on either side for the remote driver. I spaced mine out at 4’ to the center of each light. And I think I just split the distance of my hallway. I hope this helps

I used the smaller sprayer at first but I ended up using the bigger one to save time. The only place I worried about over spray was close to the house. I did manage to get a little on my windows just because of the breeze we had that day. Take your time and cover anything you don’t want sprayed.

Again, thanks for the excellent video. I finished my deck the other day. I actually used the small detail sprayer to do all of the wooden balusters of which I have 110 feet of railing so it was many times filling up that small bucket. But I needed a very narrow spray pattern I then switched to the larger spray head to do the flooring section. For some reason I was not as happy with that larger head the paint kept clumping even with the air all the way up and the material flow fairly low. I never did try to thin the stain which I probably should have as it was a solid color stain, so it was very much like paint, I found that if the larger bucket was not screwed onto the gun very tightly, the paint would ooze out of the gun, even after you stopped pulling the trigger and the switch was shut off. I bought the flexio 5000 model by the way, which is just a big plastic box that sits on the floor with the power and a 16 foot hose up to the gun. But in the end this thing was definitely worth the $220. I spent on it as it decreased the labor time by at least 10 fold

I have 6 in a room about that size and it lights it up well. At full brightness it is almost to much. If you are doing anything else it is perfect.

@@dmurphy68 that helps a lot, thank you!

You are welcome

Being a smart device you can dim them through the app.

1/2 in. Knockout Non-Metallic Push-In Connector her is a link to them amzn.to/3L3Jugm

@@dmurphy68 Much appreciated!

You are welcome thanks for watching

Thanks for watching!

I would think you could do that no problem they are only 14 watts a light.

It is each one they are super bright at the highest setting. I run them at about 20% in my small hall. I am super impressed with them.

@@dmurphy68 thanks sir

@@Zenbeau you are welcome

Thank you, I will let him know what you said.

Thank you