It works great no problems with it and my wife loves it (Simple and light) but i did some modifications on the trigger as you get tired holding it (i use 4x5Amp and 2x6Amp in one run). For bigger territorys (2000m2+) i would req a trimmer with 2 handels. But the EM2600U will cut grass, and the blade that it came with will cut wood up to 1cm with ease and with a bit of force 2cm. And the bit with the wire. Is easy to add new wire no unmounting just wind up system. Hope that helped.

@@SilverEnergy Aitäh kiire vastuse eest. Mul on maakohas kuskil põlve kõrgune rohi ja väiksemad põõsad, see masin tundub mõistlik ost kuna hetkel bauhofist vaatan müüakse isegi alla 180€. Loodan et masina võimsusest piisab sellise töö jaoks. Kõik soovitavad STIHLE ja Husqvarnasi aga minul kui tudengil ei ole kuskilt sellist raha võtta :D Mida sa pidasid silmas 4x5Amp ja 2x6Amp? Kas kasutad makita 2T õli segu valmistamiseks või midagi muud? Kui sul midagi halba öelda ei ole siis arvan et ostan ka 👍

@@sandersarevet8759 aaa anna andeks ajasin masina sassi mille kevadel muretsesin juurde DUR194ZX2. Aga see mudel mis videos on supper võimas piisav kõige jaoks mis väiksemas talupidamises ette tuleb. Võtab ka leppasi maha ilusti ;) ca 5cm tüviga. Ja kütte osas tegin segu 1:10 bensuga 98. Ainuke asi mida pead meeles pidama, et kui paned talveks seisma siis kindlasti kütte paak tühjaks, sest Makita bensukatel kipub kummi membraan läbi minema muidu. Aga see pole väga kallis ;) vahetada. Ning profi masinat pole kunagi mõtet esimeseks osta. Kõigepealt võta midagi odavat kasvõi vuffel hiinakas ja kui oled juba teadlikum oma vajadustest siis tead ka täpsemalt mida osta. Ma ise põletasin ennem 2 hiina Bauhofi bensu trimmerit läbi kui esimese Makita ostsin. Ja need 80 eurised trimmerid tegid 2-3 aastat tööd.

Ok as i need to swap the pads out again ill redo it but let the winter pass a bit ;)

Tere, tere. Olen nüüd saanud seda saagi kasutada pikal ja ainult kiidusõnad, miks ma selle mudeli valisin oli sellepärast, et saan ta võmalikult lähedale seinale panna lisaks ka hea hind.

yep i tried cleaning it but for my case the problem was that the rubber seal o the motor was leaking and the inside was totaly full of hard water damage. thats why i brought new used motors. And yes those motor prices are hell

Ok but how?

@@SilverEnergy idn

@@SilverEnergycan you also use ZHANLIDA T-7000 15ML Adhesive Multi-Function Glues,Super Glue Suitable for Phone Screen Repair,Wooden,Jewelery,0.5

In the long run i can say the replyca batterys are bad not worth another try

perfect but remember its only a temporary solution but it helps

@@SilverEnergy I re-coated it once already. It's kept going, and now the designs on the broken glass have given me the solution to a math problem. :D

Hahahha thats something new

Thank you

I speed up alot of footage but now i can say the cells are allmoust dead,usless battery.

2011

Ok thanks so it's before the revised design, cool. I am buying one with the fault so hopefully this will be a fix.

@@Rustynuts410 yeah it was a pain to get it done but I did it and now it works fine. My suggestion is buy 2 motors but check the serial numbers before you buy. Both motors have different part numbers

Ok thanks for your help and the video

As I can't see how broken it is, then I can't say for sure but overall the glue does not damage the lcd screen. But as it's glue then you can't remove it in the future. It's a temporary fix until a new screen arrives. It will give you a better water resistance then a broken counterpart.

Hahaha true that after cluing my fingers now I love those gloves hahaha

Ok could be but now i got myself a test device, but as the battery is allmoust a year old and has had some crazy stuff behind i can tell that its not worth the money eaven if it was 9ah. So i would not recomend it to anyone other than the hoby dude that uses the battery once per season.

@@SilverEnergy Do not believe everything that is written on the battery, especially from China.

i process alot of defective fake makita batteries, and what i often see are samsung 30q, wich are only 15a discharge. good cells actually, alltough not the desired c rating. but i get em from just one good supplier. sometimes i get repairs for buddies of buddies, and have seen the most crappy chinesium cells.

Thats nice to know!

Yeah, thx mate for the info. Seems that i use the tool alot more as the chuck has broken it somewhat works but i think i need a new drill. So the next one is what you recomend. Thx in addvance ;)

@@SilverEnergy I would recommend the DHP458 if you are happy enough with the brushed version. It could be a good idea to spend more on it and get the DHP486 brushless version. If you go for brushless do the free online registration for the 3 year warranty. kzbin.info/www/bejne/g6bbZGicfNKCm7M

Yes there is, i only recomend this if you just want to give the phone some more time before trach or you orderd a new replaisment screen. This fix is only if you just want a fast fix so glass shards dont penetrate your finger or face.

Good for you. Hope you have have had 19 great years and may more to come.

Wtf. Weirdo.

Hahaha no add here just what i had laying around 😂😉 and if this was an add then its realy bad and no glue could fix it 🤣

Yep, your the first one to notice 🤣😘 but works just fine 🤪 banana phone 😂

@@SilverEnergy hahahha if it works it works right?

Correct mate 🤭

Yep i looked inside, but i allready knew that it was my fault as i drilled wood with a realy big bit so cant say that Makita was bad hahahaha. Yeah i asked the local makita service and the price diffrence was 15 euros so i could not resist the new tool smell :D and thanks for the feedback!

Thx

Hi ;)

Thx that you liked it

Thx

Glad it was helpful!

1. turn off engine 2. check fuses 3. turn on engine 4. test wipers if ok then wee if not go on 5. turn off engine 6. unplug both wiper motors (there is a small plastik notch that needs to be pressed down to unplug, i broke mine the first time that i dident see it) 7. turn on engine 8. test if they work (if it does not work then there is are two more thing you can do before you need to buy new ones) let me know if this worked if not then next is, thats a bit harder as you now need to unscrew both motors and check if they are set to the starting position under the black plastic cover. and recheck. if that did not work then take the motors apart and check if the motor has had water damage (back aluminium cover) + check if the bruches are ok inside and need replacing. if that all did not help check your local car yard if they have new motors and test again. good luck its a total pain in the ..... to get them to work took me total of around 4 weeks to test out and figure this out. But now they work atleast.

@@SilverEnergy your awesome thank you buddy

@@SilverEnergy the fusese under the hood not inside the car??

@@vikingshpvs465 check left from the steering wheel. The small pull out holder/box behind that.

@@SilverEnergy mine is a 2009 c5 I can gove you the reg if you like It its the exclusive edition

Its a drywall blade we use longer onese but the US has this www.dewalt.com/products/hand-tools/knives-and-blades/drywall-blades--50-pack/dwht11133l hope this helps

Simple. It's a Razor blade... Lol

Warum nicht? Bei verwendung als übergangslösung. Damit Glasscherben nicht im dem finger oder gesicht gelangen ;) Das war mein Punkt für das video!

The final problem was that the sealent was missing and water had intruded in to the circuit of the wiper motor and messed up the logic. So we did buy 2 used motors and in the end used parts from the old and new motor to build two totaly new onse and atm they work. Total pain i would say.

@@SilverEnergy O , thank you very much, just got replacement motor but problem the same, are going to open them and check inside, thank you for advice

@@disnacdisnac4215 one extra note that i may have not said before is that open the black plastic housing and inside you will find the metal rods that moves the whipers. Set them manualy using a screwdriver as a leaver to zero. And then connect to the car. I found this way they work reset some internal stuff i think.

@@SilverEnergy Thank you, you are my Guru now

Hahaha thx hope it helped, and no problem here they worke till this day

Thank you for the information, smarter every day.

www.loctiteproducts.com/en/products/fix/super-glue/loctite_super_glueliquidminitrio.html this one is ok that i have tested they allso have this in single packs ;)

@Mahmoud did it work for you?

@@technicalsupport1380 yes it did