Excellent test, what do you think the beginning voltages were? tia
@ThomasColeman5 күн бұрын
i have the fms futura v3 which comes with the 3665 motor but plastic EDF its on 6s stock, can it take 7s out the box ( i have upgraded the ESC to a HW 130A)
@ghoustanable5 күн бұрын
@@ThomasColeman yes you can
@AphexTwinII9 күн бұрын
e-Flite, "Hold my beer." XFLY, "Hold both my beers."
wish i could of seen the battery placement. gonna try 6000mah on mine
@eoinj392913 күн бұрын
Can you provide details of what angle the thrust tube is at to achieve this? It looks worth copying and tell the "mad scientist" well done ! 👍
@tructran878315 күн бұрын
Awesome. 6+ minutes. Seems like it has 6s 3600 or something like that. ❤❤❤❤❤
@tructran878316 күн бұрын
Very nice, 2 minutes. ❤❤ what about timing for ESC ?
@ghoustanable16 күн бұрын
@@tructran8783 low timing on the esc
@markh446716 күн бұрын
Did you run the stock EDF unit?
@ghoustanable16 күн бұрын
@@markh4467 no I run it on the freeway 2500 KV inrunner with a 60 amp ESC
@user-kq7bg8uk9n17 күн бұрын
I just bought a banshee what do I need to do this upgrade ???
@ghoustanable17 күн бұрын
@@user-kq7bg8uk9n 60amp esc freewing 2500kv 6s inrunner edf unit and 2200 zees 120c or HRB 1800mah pack or any pack that's within the dimensions of the packs listed above. Cheers and happy flying. Thanks for watching.
@user-kq7bg8uk9n17 күн бұрын
@@ghoustanable thank you ! I just ordered this set up will be here I a few days I appreciate the help!
@AphexTwinII20 күн бұрын
The ball links that come with the kit are perfectly fine. No need to spend $100 on linkages.
@ghoustanable20 күн бұрын
@AphexTwinII Sorry, but I would agree to disagree. The ones I had were absolutely hot garbage! The same linkages were also in my BH l-39, and the nose steering one popped off on the taxi test.
@Silverotter_psn20 күн бұрын
The video is very clear i bet anyone even people who are not rc pilots can uslndersand, keep up the good work
@hamiltonshangar20 күн бұрын
Nice!!! 🔥🔥🤝
@tructran878320 күн бұрын
Nice. what fan and lipo pack do you use?
@ghoustanable20 күн бұрын
@tructran8783 QX 6s edf with HRB 6s 1800mah. That said, the freewing inrunner 2500 KV fan is much better and produces less amps
@bryanho683020 күн бұрын
Update: ran this exact set up and everything was great until the 10th flight. The fan blew itself apart at max throttle during take off. The motor might be able to handle 10s but the fan has potential to fail.
@ghoustanable20 күн бұрын
@bryanho6830 sorry to hear about that. I've been running it on over five different 90 mm jets for 2 years with over 100 flights with no fans failing.
@bryanho683019 күн бұрын
Who knows, maybe the new batches are not as good. I bought another one and will try again. The performance is amazing at this price point so I gotta try again..wish me luck @ghoustanable
@neglg235321 күн бұрын
And this is a dog fight between freewing F22 and this fw mig 29 both with xicoy45 setup kzbin.info/www/bejne/hneZiZaCat-bsNUsi=dvEcS5HSjR-Q-3u2
@helmuthuneke177523 күн бұрын
Maybe the flyfans K8 is even better ...i have both❤
@mihauok127 күн бұрын
I see some war time behind it
@user-gp4xd7xc5t28 күн бұрын
Nice!@
@user-gp4xd7xc5t28 күн бұрын
4s available??
@ghoustanable25 күн бұрын
@@user-gp4xd7xc5t the planes been discontinued they don't make it anymore
@xcz578529 күн бұрын
Did you scuff the matte covering or just clean?
@ghoustanable29 күн бұрын
@@xcz5785 I did both. I used Scotch brght with water.
@VT-FPVАй бұрын
hey garfield! ive just faced this issue with brand new retracts for the mig29 80mm were you ever able to figure out what the issue was? ive sent a mail to motionrc as i just purchased them and they died after one run.
@ghoustanableАй бұрын
@VT-FPV mine was just dead on arrival. I contacted motion and made this video so that they could see the problem and they took care of me.
@scottconnors7901Ай бұрын
8s. More weight, been there done that.
@scottconnors7901Ай бұрын
I see you play dangerous on your battery level 3.77 will get you into trouble one day. I never go that low and my battery's , and they don't swell, plus they last longer, good flight. just a tip.
@sendit_rcАй бұрын
Maybe some 1920kv 9 blades on 8s 😊
@ghoustanableАй бұрын
@sendit_rc I need to get some 8s packs
@pintu.pati.733Ай бұрын
Complite guid!
@gooniac33Ай бұрын
that is actually really good!! What burners are you using? That can affect things too...
@ghoustanableАй бұрын
@gooniac33 I'm not sure it came with the plane. I believe it's the freewing afterburners if l'm not mistaken.
@gooniac33Ай бұрын
@@ghoustanableif you use mine it will be even better....
@israeljuarez3707Ай бұрын
The crash is an example of an accelerated tip stall, which this particular model is fond of doing. I noted that the plane made a fast tight turn ljust before the crash. and this resulted in an accelerated tip stall that led to the crash. This plane is what we know as the king of tip stalls. You fly slowly? You lose power? You attempt to do tight loops and abrupt changes in direction? You flare just a tad too much when landing? You take off with insufficient speed? Yes, tip stall. And no SAFE will save this model from destruction. Once you tip stall at low altitude, it's over. And this model is so heavy for its size that its wing loading suffers accordingly. Therefore, it's critical to fly it scalelike at all times, and never, ever cut the throttle on landing. This jet DOES NOT glide. It simply drops like a rock in a tip stall manner. Takeoff must be scalelike-very shallow climb, not Timber style.
@ghoustanableАй бұрын
Well said 👏 👌
@jasontidwell1206Ай бұрын
How large is the opening at the rear of the plane?
@ghoustanableАй бұрын
I believe it's 100mm
@bryanho6830Ай бұрын
Damn... wish I would have seen this video before I bought a schubeler fan..
@derjoh1986Ай бұрын
Not to be a hater at all, I think this is extraordinary! But how do we, the viewers, know that it's an 18S setup other than your word?
@fpv-techАй бұрын
What sort of amps u drawing
@stevecollins2981Ай бұрын
Heavy into pylon racing, I discovered that you can't get an accurate speed from a radar gun standing way off to the side like that. To get a speed reading that's real, the radar gun must be in line with the approaching plane. Off to the side like that the readings will always be higher than the true speed.
@M4rkmcc21Ай бұрын
136mph on 10s? I didnt like my 10s. I prefered 9s. Easier on the packs and tad less weight. Be to see if them SMC packs puffed on that 150A draw. I've read they dont dish out well on high demands. 6s yes ideal. But 9s 10s etc im happy with my Lipos. Its whats putting me off investing into a bucket load of SMC. That plus the many factory push backs for nearly 1 yr now.
@ghoustanableАй бұрын
To be honest with you, the blue yowoo batteries pushed out more power, and I got 327 km an hour on my first 10s setup on the f-22. See link below. kzbin.info/www/bejne/f3WTnWBordGCeZYsi=rcpl3_E6AzppecnF
@lukaszJBАй бұрын
Do you use flaps when taking off AL 37?
@ghoustanableАй бұрын
Yes he does
@sendit_rcАй бұрын
What fan and kv?
@ghoustanableАй бұрын
Fms 1500kv ...cc 160 esc smc 4 and 6s 4400 mah hlv packs
@maggietyler78Ай бұрын
Same setup I have in my 22 and viper. Amazing
@bryanho6830Ай бұрын
The fms 1500kv is for 8s no? How are the temps at 10s?
@jacklets3851Ай бұрын
I got mine up to 225 kmh on the stock setup with 6 cells. I had to use a 500 foot dive though 😂
@andrewsc7304Ай бұрын
Great save!!!
@tomling9310Ай бұрын
Fms 1500kv edf unit?
@ghoustanableАй бұрын
Yes
@freestilelyfestyleАй бұрын
Dude stop relying on your telemetry I dont care what that thing says keep your flights 3min max then prepare to land.
@bryanho6830Ай бұрын
Im basically gonna run the same setup as you with the castle 160amp esc. May I ask what settings you have on your esc? Imo's cares about what timing you're running
@ghoustanableАй бұрын
Lowest setting on timing for the esc and smc Lihv 4400 mah packs.
@bryanho6830Ай бұрын
@@ghoustanableThank you!
@fortunajetsrcАй бұрын
Can you help me how to setup the reverse, thanks
@ghoustanableАй бұрын
@fortunagames5828 I'm running a Castles Creations 160amp HV ESC that has an auxiliary plug feature with it. I can connect it to a separate channel. You have to use the Castle Creations USB dongle to program the auxiliary feature for it to function as reverse thrust.
@bryanho6830Ай бұрын
I'm running the same ESC on my setup 10s. What are your ESC settings?
@ghoustanableАй бұрын
Low
@bryanho6830Ай бұрын
Thank you. @@ghoustanable
@M4rkmcc212 ай бұрын
I found this to be this set up to be an Amp monster. In my F22 on 5° it was at 140A 3486W around 3.9kg thrust max. Just too much for my lipos. The 1500kv on 9s is kinder on the lipos at 130A producing 4.6kg of thrust in the F22. Thanks for the upload. I also ran this set up on my Venom too. 2.3kg plane, 3.8kg thrust and 130A draw 8°. But top speed wasnt great at 111mph. It climbs on full power and needed a down EL mix as throttle went to 75% upwards. Plus it gets the wing wave wobble with this extra speed/power. Unfortunately i destroyed it from an unrecoverable stall and demolished against a brick building.
@DODICZEK2 ай бұрын
Nice
@rcjetaviator2 ай бұрын
Well Done👌
@victorrcjets76602 ай бұрын
Nice job😊
2 ай бұрын
What about the CG using 7s 5000mah bat?
@ghoustanable2 ай бұрын
No problem, what so ever.
@fedesilvi69652 ай бұрын
Stl?
@khangduy76353 ай бұрын
The black horse, seagull, and phoenix model company is near my home in Vietnam, they specialize in producing very good wooden models, I produce composite models😊