@@F83.M4 you are very much welcome.

The bump step is made to absorb the impact of a backing up bump or someone bumping in to it while pulling in to a parking stall or a small bump at a stop light. It's made of plastic so I'm sure there is no way that it could bend the frame it will most likely break of or crumple since the inside of the step is a honey comb design.

@ thanks

I have not checked on this, but I'm sure you go to there website you can chat with a person and they can help you with that. It state it's for the 2019 to 2025 with the 5.3 V-8, it you have a 5.3 V-8 with a 10 speed maybe it is a universal fit.

@@Patrick-mq9gk They do make one but, to be able to install it you have to drop the exhaust system from just above the catalytic converters. I did buy one but I ended up returning it because I was not going to do that.

@@HowtowithPaulHendersongotcha don’t blame you on that I just put on the ppe thermostat bypass already had my torque converter changed out at 45K miles

​​​​@@Patrick-mq9gk I just install the PPE bypass last week and I filmed it. Mine definitely runs cooler and that trans bump it would do doesn't do it anymore but it feels like it almost wants to but it doesn't. The PPE video won't be out for a month or so, I was feeling really good so I filmed like eight videos between the truck and the motorcycle and now I just got to get caught up on editing of them in the order that they were filmed, this B&M dipstick video took about 30 hours to edit.

@@Patrick-mq9gk WTF........at 45K miles that is crazy, do you tow with it, Let me know I'm curious I have never towed anything. I can say for sure I had never seen my transmission temp go above 198 degrees before the PPE Bypass install and that temp was very seldom, it reached on average mid 170's to high 180's. Now with the PPE bypass it seems to be running cooler but I haven't had a chance to test it on a trip yet to Vegas, that will be when I make a follow up video to the install video of the PPE that will be out soon I hope I'm backed up on video editing.

the fan on the back of the unit only comes on to cool the electronics, the one that is inside the unit appears to be on all the time to keep the air circulating.

Do you have any concern about the fan drying out your cigars?

@@frankmilano as of today 2-1-2025 my cigars are perfect better than when I had made the unboxing video, I think they were a tad dry. Only issue I can see is that the display panel temp and humidity are both off by at least 6 points my GoVee shows 65 degrees & 71.8% RH the display show 72 degrees & 65% RH this may be because the room it is in is 66 degrees so I'm sure the internal heating device is not made for that type of heating and it probably also affects the humidity. But they do taste and smell great.

Thanks you, with each passing few months I feel better and better.

@@danlaporte9307 125,000 mi that's good to hear, I have just over 63,000 miles, so far everything is good. I looked at a few other products and I chose the pulsar LT. I take pretty good care of my vehicle so I'm hoping to get at least 300,000 mi out of it My Pontiac firebird had 325,000 when I stupidly and practically gave it away I still regret that....

Tango is defiantly the instigator.

I agree, you can also submit your own banner and if it is approved you and can send it to your plate.

@tylerpedro9829 no issues whatsoever, as for horsepower gains it's really hard to say. I know it's not called a ram scoop but it does scoop the air so the air to me has to be forced over into the intake slightly and then of course at idling a light or slow speeds It brings the cooler air from just behind the grill then getting air that radiates from the radiator. I feel it does what they say it does.

@@tylerpedro9829 as for the rocks and pebbles no the scoop sits just behind the top two or one and a half slits in the grill so I feel at rocks or pebbles have a hard time getting through those two upper slits

Bummer that you have to send it back, what happened to it? My K-Elite is just over 6 years old and it still works perfect, I do do a vinegar flush every six months.

@@HowtowithPaulHenderson Needed a narrower model, and love the Supreme I have.

I wish I could help you with that.

@@JustinFarao-d2q Are you color connecting the speaker wires in the back correctly or maybe the wire aren't being inserted all the way

@@HardySeeley wow, I love mine I'm glad I didn't throw it out. I was going to but I decided I want to take the shell off and see what the problem was. So then I decided to film this video just in case someone had the same system and the same problem.

Be sure that the gasket does not get crushed when you sit the plate in place, a baby flat blade screw driver will work fine to use around the plate to lift the gasket up.

you are vey welcome, I love my Big Easy if you buy the accessory kit there are hooks to hang ribs on and the ribs turn out perfect every single time.

maybe the tray is misaligned, this might allow it to close then re-open do to too much pressure when closing. Did anybody at your house try to force it open to remove a cd that may have jumped off the tray. If so that will defiantly cause it to become misaligned. That is the only thing that I can think of.

ThnkU 4 replying however it's not a cd jam I can loaded w/cd it's not staying close? And there's ta sound it makes

@DeaconJCross I have no clue, sorry

@@DeaconJCross I have no clue on what it can be....

It does have a locking mechanism, it's not a strong lock but it will hold it in place. It does give it the appearance of a locking gas cap of the past. I still use it as of today even though it is getting a bad rap it's better to use it than not, since it will keep wash water, rain water and dust from entering the system.

Thanks you, I was able to find better O-rings on Amazon, the new O-ring seems to be holding up better than the one in this video

Yes you can wipe the drawer with distilled water two speed up process, but it's not recommended and I wanted to see how long it took on its own to get up to the 70% humidity. I did however wipe down the drawer and shelf with distilled water between takes where I was loading the cigars into the humidor since I was opening closing the door the humidity kept dropping, it did however get back up to 70% very quickly. So my cigars have been there for about 5 days, I decided to wait to smoke the first cigar and it burned perfectly even and tasted great.

@HowtowithPaulHenderson thanks for the info, I may invest in one possibly. I'm using sistema airtight Tupperware container with boveda packs with 2 cedar trays works great, keeps everything at 65rh-68rh but want something a little nicer and visible for my smoking room. Thanks for the upload.

​​​@@Matthew-qk1xi Hi Matthew I tested the codes at Amazon and needonelife.com and it works at both. The prices at needonelife.com site are the same as on Amazon. I'm smoking another cigar right now. So far for the 5 days of owning this units I can say it is an awesome unit. I never knew they had humidors for sale like this. Coupon codes are good until January 6th I believe. If you're going to keep like 35 to 50 cigars of a larger ring size this will be perfect size I have 35 in there and I'm sure I get fit another 15 have the same size with no problem.

@HowtowithPaulHenderson thanks. I usually smoke from 48-60 ring, more around the 52-56 usually depends on what I want to smoke. I hear they run pretty quiet also so that's a plus.

​@@Matthew-qk1xi Yes it does run quiet, there is a cooling fan on the back of the unit that cools the electronics. You can hear it but barely, it's quieter than a single cooling fan on my HP Omen computer tower when it's set to low power

@@Tradewinds-s2o Don't tell me you're crazy ex-wife put something in your gas tank, you do not mess with a guys vehicle That's the number one rule during a breakup. But I think women follow that rule they know how much we love our vehicles and one way to really pisses off is to mess with it.....

@@rpe97 hello RPE97 Thanks very much for the nice comment, I do make it through a video sometimes without having bloopers but it's very rare....

@@harrizzaki3536 thanks for the nice comment, wish I could help you with that, I don't have any idea of what it might be unless there's a fuse on the back of the unit.

@HowtowithPaulHenderson I has change the fuse but still same..cannot on the radio..Is that the transformers are problem?

@harrizzaki3536 wish I knew the answer, could be so many different things. Sorry

@@harrizzaki3536 I wish I new the issue, sorry

I do agree, but you have to admit I got the job done. I'm a breast man and that is all I wanted was the breast.

@@allisonfey1 It sits on top of the thin plastic piece that is connected to the Keurig, It kind of locks in place

@ thank you so much

@@jonellholly5087 Maybe lame for security purpose but it will keep dust / rainwater/carwash water from getting into the capitalist fuel system. If there's a malfunction in the top trap door water will get into the system and if the drain hole above the second door is blocked that space will fill up with water. Long story short I saw on a KZbin video of a guy that lives in Canada he had a malfunctioning top trapdoor It was raining and water filled up the in the pipe from above the second trap door The drain hole froze over and there was a solid chunk of ice in that pipe That's why I think this cap is worth buying May not be worth the price But the alternative makes it worth it.

Thank you, I still have this unit and is working perfectly. I don't use it everyday but when I do I can feel a difference in the air

@@keenankong8537 No I don't, chicken legs are ok though

yes, the heated steering wheel works it may take an additional minute before you start to feel the heat. no issues whatsoever. My main purpose for installing these protectors is to keep my leather looking perfect for as long as I own my truck, without totally covering the leather it's a very nice-looking wheel and this 3-pc set does not cheapen the look of the wheel or the interior at all.

@HowtowithPaulHenderson thank you for the info. I sweat a lot at work, so I want to keep the steering wheel as nice as possible on my new Rover. It's in like-new condition & want to keep the steering wheel from getting all nasty like my leather wheel did in my RAM

@@j.jmcquade5278 The other thing that I noticed when I drive is that I do not touch the leather at all, they cover enough of the wheel so my hands stay on the covers and they wipe clean with a damp rag..

Here are a few questions. Did the box looked factory sealed? maybe it was a damaged return and re-sold as new by mistake. Do you think you could have hooked the Pulsar harness up backwards?. Maybe the Pulsar harness connectors were not seated correctly into the stock OEM connectors. Is this Pulsar Lt for you trucks model, year and engine size? I'm sure it is I just had to ask. If all the connections were done correctly and the unit you received is for your vehicle then the Pulsar Lt must be defective, they will send you a new one with no problem. I hope this helps This is an excellent product and as of today I have not had any issues with my Pulsar Lt Paul Henderson

@ So far what I have done is contact edge.. I was told that GM changed how 2022 1500 Silverados (refreshed) communicate. Apparently there is no Pulsar LT works with 2022 Refreshed. Do you have any other suggestion of what module to adjust ECM at least the speed limiter for 2022 refreshed?

@@AldreneVentula well that is kind of good to hear, at least it was nothing you did wrong or a defective Pulsar Lt. After I left the response to your original post I had wondered if Chevy made some changes to the 2022 years computer system. As for if I know of any other device to shut of the DFM, I do not know of any. Just keep searching the internet I'm sure somebody will come out with one, hopefully Pulsar Lt will soon.

@@Gotfive5 me too

@@dab34rs And a lot safer and a much quicker cleanup. I did a video of doing ribs in The Big easy and I just recently did a test run with beef kebabs and they came out phenomenal.. I'll be doing a video for that soon. I'm sure you're one for Thanksgiving will come out just as good if not better enjoy.

@@briones7817 hello Briones. I'll email you the template for free, just email me at [email protected]

Hi TMXV That's awesome, glad you found my video useful.

Thanks, glad I made you laugh. I can never get through a scene without a blooper or two

@@darryngleason5985 I did buy some recently so when I cook the turkey this Thanksgiving and the Big easy I'm going to be testing these gloves out plus a new knife set that I bought from DalStrong.

@nocapjayyy you just need to use a small flat head screw driver to move the rubber gasket out of the way.

I do believe there is a screen blocking a hose from going in to the tank, that is what I was told at the dealership. If it's true I have no idea

@@MichiganTrailRider yes the cruise control works as before the install. I forget what cruise button is used to adjust the throttle sensitivity but that one button can only be used to adjust the throttle sensitivity when the cruise control is off and does not show any symbol on the DIC.

@ so potentially the throttle sensitivity could be changed by mistake if the cruise control is in the off position .

@@MichiganTrailRider yes it can, but you would have to hit that button twice, once to see where the sensitivity is set at which will be shown on the mile per hour gauge and then tap up or tap down to set the new level. I had never experienced this so I do not think it is as easy as it may seem it would be.

I'm so glad this video helped you, as for the license plate lights in did switch out the halogen bulb for two LED bulbs, the halogens made the letters look yellow. I bought the LED bulbs from Amazon. Here is the link..... Auxbeam 194 LED Bulb, 168 T10 W5W... www.amazon.com/dp/B08D3JG8SZ?ref=ppx_pop_mob_ap_share

Thanks Jay appreciate it, with each passing month I feel better and better. Especially the last month I've been getting extra sleep and I feel awesome. I did have another micro mini stroke just over a month ago and that was the last one so everything's looking up

@HowtowithPaulHenderson Well imagine it could certainly be worse and if that's all that happened, consider it a blessing. Keep up the great work my friend 🫂

@@Mark-R8 it's main purpose is to keep rain water and wash water from filling up into the top of the capless system and potentially dripping through into the space above the second trapdoor and the fill pipe and if you're in a freezing environment I could potentially turn into a solid tube of ice. As a theft cap no it doesn't work as a theft deterrent sort of it might deter somebody from trying to steal the gas or put something into the tank that shouldn't be there.

Sorry I do not know, I'm sure a smoker box would be fine, but it will get covered with the drippings

are you talking about the doing a DFM delete, yes this is true it can be done but will be expensive

yes, you can buy a dry filter that is washable from AFEpower.com The filter is a Magnum flow filter number 21-40011 it's just a tad smaller than the OEM filter. the cost was around 65.00. I haven't installed it yet but I do have 2 of them I had just installed a new OEM filter before I bought the AFE filter, it is a gray color not red

That I do not know, I have not had any issues with the PULSAR Lt. I did hear that to do a DFM delete it is expensive

@@TheRealJohnMadden glad you were able to get it fixed