BoostyMoose

Пікірлер

@Mad_Skill_Garage 3 ай бұрын

Nice video! 👍 Looking forward to your roadtrip. We also had the 90 here in Denmark! Nice car!😃

@BoostyMoose 3 ай бұрын

Thank you, I am still gathering the missing pieces

@trollhattanclassics 3 ай бұрын

Saab sold the 90 also in Germany, 1.200 units in total in over 3 years. 5 Speed Geearbox and the sporty front spoiler was standard. Only option the customer had was the color and the sunroof.

@BoostyMoose 3 ай бұрын

I heard also that some was sold in the Netherlands

@trollhattanclassics 3 ай бұрын

@@BoostyMoose Thats correct, Belgium as well. Totally underrated in my opinion - the best version of the 99!

@BoostyMoose 3 ай бұрын

@@trollhattanclassics My favorit 99 is still the hatchback. Wish they started producing the hatchback erlier, with chrome bumpers, that would have been amazing.

@jan-akestenberg7176 3 ай бұрын

Ett tips bara skippa musiken när ni pratar.

@BoostyMoose 3 ай бұрын

Brukar försöka sänka den, men ibland glömmer jag dubbelkolla så det inte överröstar

@MiniorMinority 3 ай бұрын

Fantastic video! We had the Saab 90 in the UK (but only for a couple of years). I had a 1984 8v turbo for a few years. Maybe the best car I have ever owned. Good luck!

@BoostyMoose 3 ай бұрын

@@MiniorMinority I'm dreaming of getting an old classic turbo for my own, they're not cheap...

@michaels4766 5 ай бұрын

Love your work, can't wait to see more!

@BoostyMoose 5 ай бұрын

Thank you! That means alot

@THEadrian85 5 ай бұрын

Stackars rem... oj nej ja mena turbo.

@BoostyMoose 5 ай бұрын

Hör du maskineriet? den spinner som en katt!

@Mad_Skill_Garage 5 ай бұрын

Nice work, nice car! 😊

@BoostyMoose 5 ай бұрын

Thank you! I'm glad you like it!

@jayschuon8330 5 ай бұрын

Did it work ?

@BoostyMoose 5 ай бұрын

It surpricingly did, but I was and still am ready to replace the headgasket if it fails.

@christian-ov6rm 5 ай бұрын

Snyggt jobbat! ser fram emot nästa video!

@BoostyMoose 5 ай бұрын

Tackar! man får göra vad som krävs för att hålla dessa skönheter rullandes

@sanchopanso9976 5 ай бұрын

👍

@BoostyMoose 5 ай бұрын

Stay tuned for the next update

@sigg610 5 ай бұрын

Having the headgasket break to the outside instead of into the cylinders must be pretty rare lol

@BoostyMoose 5 ай бұрын

Yea, I have not seen this happen before, though I have heard that it's more common on these older saab 900 cars

@sigg610 5 ай бұрын

Nästa år är förhoppningsvis min 96:a där

@BoostyMoose 5 ай бұрын

Hoppas vi ses där

@kacperstick 11 ай бұрын

Nice to see it come to life even after it had a flashing oil light. Best of luck to you!

@BoostyMoose 11 ай бұрын

I have yet to run the engine hot so i will have to wait and see if the engine is savable or if I have to rebuild or replace it

@ABDULRAHMAN7334 11 ай бұрын

is this Trollhattan

@BoostyMoose 11 ай бұрын

You could believe so but it's actually Örnsköldsvik

@intrepid5684 Жыл бұрын

The engine sounds good and you have good compression. If it's not a soft plug then you will most likely need to change the head gasket. That's an easy job which you can handle. Keep up the good work.

@BoostyMoose Жыл бұрын

I did not change the headgasket. In the next video you will se what I did to fix it

@intrepid5684 Жыл бұрын

Do you have a soft plug leak?

@BoostyMoose Жыл бұрын

It was not a soft plug

@jonnyb4336 Жыл бұрын

You have a coolant leak, bummer. You know where its leaking, excellent. It’s leaking at the head gasket, oh no! It’s not leaking into the cylinders… wait, what? That’s some really good luck! Don’t know if you Swedes have a national lottery, but if so I’d buy a ticket if I were you😁. Liking the challenge so far.

@BoostyMoose Жыл бұрын

Maybe I should go buy a lotteryticket, I have truly been lucky (with this car...)

@intrepid5684 Жыл бұрын

I liked this video! I enjoyed watching you make some repairs. That exhaust may need to be replaced. It's in bad shape. I've owned a 96 and look forward to seeing you work on that as well.

@Emil91 Жыл бұрын

Fick med min gröna Vaz vid 7:38 🙂

@BoostyMoose Жыл бұрын

Nice, kul med gamla simpla bilar

@jonnyb4336 Жыл бұрын

Liking the challenge so far, should be fun 😅

@BoostyMoose Жыл бұрын

We will see what this car has in store for us next. Hopefully not too much work

@MrOikono Жыл бұрын

Let’s gooooo. Simple. I see Saab , I subscribe…

@BoostyMoose Жыл бұрын

I get it too, saab is very nice

@sanchopanso9976 Жыл бұрын

Keep going!

@BoostyMoose Жыл бұрын

I'm hoping the cars will do that too!

@tompettersson3814 Жыл бұрын

Jag har kört gl 82 som brukis i 12 år och 40000mil. Den har gått 62000 mil nu. Aldrig åkt bärgare. Bästa bilen jag ägt.

@BoostyMoose Жыл бұрын

Ja, denna har varit väldigt pålitlig maskinellt. Köpte den billigt med rasad växellåda

@BWTECH0521 Жыл бұрын

thats a good saab, started up like it never stopped :)

@BoostyMoose Жыл бұрын

I was actually surprised how quickly it started. Swedish enginering at it's finest.

@BWTECH0521 Жыл бұрын

Good to see young guys appreciating old saabs haha, love it!

@BoostyMoose 6 ай бұрын

of course, they're living work of art, every single one of them

@saabtrip3714 Жыл бұрын

😍 looking forward for the road trip

@BoostyMoose Жыл бұрын

Me too, but I'm a little scared that we will break down in the middle of nowhere.. But we'll figure something out in that case

@saabtrip3714 Жыл бұрын

@@BoostyMoose it will be fun to see :D But hopefully the 900 and 96 are going to made it

@BoostyMoose Жыл бұрын

@@saabtrip3714 I'm currently working on an update

@intrepid5684 Жыл бұрын

Pretty boring, but I do love the Saab's

@BoostyMoose Жыл бұрын

There is is more old saab to come! Thanks for the feedback, I will see if I can make the "infirmational" videos more interesting in the future. I'd love to hear any suggestions you might have!

@intrepid5684 Жыл бұрын

@@BoostyMoose People love when you wrench on the vehicles. Repair something, improve something. Keep it light, joke around. Try to put out some longer episodes.

@BoostyMoose Жыл бұрын

I kind of like doing the shorter format videos, I tend to make a lot more content in the long run if I don't have to spend so much time editing a longer video

@preamble466 Жыл бұрын

You are a good son, God bless.

@BoostyMoose Жыл бұрын

My dad wanted to scrap this car 7 years ago, when I first got into Saabs. I begged him to keep it so I atleast could have a parts car. Now it has been standing in his backyard since then, so he's probably happy to see it go away for a while

@MrHaro196 Жыл бұрын

Yep you heve lots to do with a project. Spoler alert. What will hide in the engine. Probably you have worn-out engine bearings. If not damiged crankshaft. So take out engine sump check big end bearings uper side and the main bearings especially nubered 2,3,4.

@BoostyMoose Жыл бұрын

The bearings was replaced no too long before the car got parked. So if they need to be replaced, that will have to be at a later stage.

@BoostyMoose Жыл бұрын

Also, the engine is going to be checked before determining if it needs to be parked for longer or if it is fine to drive of course

@pbutter237 Жыл бұрын

Thanks for this! This is the first time I have seen or heard of anyone making this repair. I have the same problem in my 1989 900s sedan. I think it is the worst part of the car. Saab didn't think this through too well. The part is just a piece of cardboard. Mine has sagged over time and the edges have broken off. I have repeatedly taped it and wired it up only to have it fall. The speakers attached to it are too heavy for such weak material. After my last repair it all fell down in a day! So, now I have put a large plastic container under it just to hold it up. It looks like yours is in better condition overall.

@BoostyMoose Жыл бұрын

Yes, It was in pretty good condition to begin with, but I was still torn ower if I should reuse it or make one out of plywood or something, but I'm pretty happy with how it turned out

@pbutter237 Жыл бұрын

@@BoostyMoose In the newer model years they used a type of molded plastic which was similar and stronger. I wonder why they didn't figure that out earlier? That makes me think that I could get one from a newer Saab at a junk yard and cut the piece to fit the classic 900 sedan.

@BoostyMoose Жыл бұрын

Could be worth experimenting

@BWTECH0521 Жыл бұрын

your videos are so relaxing to watch. Thanks for a good start to a monday morning! Excited to see how your father's 9-5 turns out :)

@BoostyMoose Жыл бұрын

I'm reviving it on a budget to begin with, just to get it back on the road. Hopefully I can afford to restore it completely some time in the future

@BWTECH0521 Жыл бұрын

that was rough, good job getting it free! I love the overall style of your videography. Keep it up dude!

@BoostyMoose Жыл бұрын

Thank you! Hearing it means alot!

@SaycoPworrell Жыл бұрын

Come on baby, start!

@BoostyMoose Жыл бұрын

That's k-jetronic for you 😂

@pbutter237 Жыл бұрын

Forget this piece of junk...work on that cool collection of Saabs in the background! 8^)

@BoostyMoose Жыл бұрын

It is very much not prioritized. But since I own it, it will not be ignored completely

@pbutter237 Жыл бұрын

My parking brake, the pressure plate, totally rusted. I had it removed since it was partially dragging on the rotor causing a moaning sound. It was barely used since it is an automatic. The car is typically garaged. So, this part should not have failed so badly.

@BoostyMoose Жыл бұрын

You need to use it once in a while, but since my car has lost the return springs it might be a bit more risky

@pbutter237 Жыл бұрын

How did this get so rusted? The newer/NG Saabs seem to rust less than the classic models.

@BoostyMoose Жыл бұрын

In my experiance, this generation (pre facelift) is the one with the minimal problems with rust. But this car has been daily driven in the salty roads of sweden every winter, and not really taken care of. My facelifted 9-5 has seen alot bigger rust problems than this car but that has been taken care of directly so it doesnt spred anymore

@saabtrip3714 Жыл бұрын

Great!! I love the Videos

@screwit8408 Жыл бұрын

Looking forward to the next episodes! I'm currently working on my 1997 9-5. These cars are great to learn the basics of automotive enginnering

@trevorhoover6582 Жыл бұрын

"PromoSM" 🤣

@BoostyMoose Жыл бұрын

What do you mean? What do I promote?

@jan-akestenberg7176 Жыл бұрын

Spännande projekt ska bli kul o följa det.

@BWTECH0521 Жыл бұрын

I love these small repairs/updates on old cars. One day at a time! Good video.

@BoostyMoose Жыл бұрын

Thank you! It feels good that even these "small" and "low effort" videos are still appreciated, I will probably keep posting even the small projects I do.

@kayerickatson4814 Жыл бұрын

Saving another Saab! We love them!

@jonnyb4336 Жыл бұрын

Well done, some excellent progress! And maybe a torch on the rotor hub will help free it…

@BoostyMoose Жыл бұрын

Good idea! I think I might have figured out the problem though, but if not I will try that!

@joeneoj Жыл бұрын

Fint!

@BWTECH0521 Жыл бұрын

hope that wheel gets unstuck!!! Great video, beautiful cool little town :)

@BoostyMoose Жыл бұрын

yes, I hope so too, I need the wheel to be free to be able to take it to the garage, I will be using a dolly cart when moving it. Thank you for the support and the "town" is the village where I grew up, but living close to the edge and paning over towards the center makes it look alot bigger than it really is:)

@bonafriss Жыл бұрын

I have a ignition cartridge that I can donate to the channel if you are interested. Love restoration projects like this. Doesn't have to be a fancy car to be enjoyable. Send me a PM if interested.

@BoostyMoose Жыл бұрын

Thank you, but I have allready gotten the ignition cassette covered. But if it fails I'll hit you up!

@BWTECH0521 Жыл бұрын

Looks like the rust will be the most challenging. Hope you can make it work! There is nothing better than a saab with sentimental value! 😊

@BoostyMoose Жыл бұрын

One of the things that inspired me to finally start this project was that I found out that it is legal in sweden to just cut out the trunk floor and replace it with a flat sheet of metal as long as you get rid of the tow hook and register the car without it. That would make it a hole lot easier if I am unable to just patch up the holes. Small sacrifice to get rid of the towhook but it might be worth it just to get the car back on the street

@jonnyb4336 Жыл бұрын

Regarding the engine oil pressure, many early models could develop the infamous “sludge” issue. Oil pickup screen may be substantially clogged, causing the low oil pressure and warning light flickering, but the screen can be cleaned if you drop the oil pan. Besides clean it he pickup screen there was a PCV update fix too, but a first step I’d suggest is to remove the cam cover and see if there is any evidence of oil sludge on the valve train. Good luck, and will be watching!

@BoostyMoose Жыл бұрын

That is the plan, I am hoping that the issue is something like that. It would be really nice if I don't have to replace the engine.

@BoostyMoose Жыл бұрын

I did notice that the vacuum port for the PCV on the throttle body was clogged. So if that is anything to go by, I might be in luck, we'll see.

@BWTECH0521 Жыл бұрын

Hey! Another 9-5 restorer!! Welcome, looks like you have a lot of work ahead of you :) let me know if you have any questions, I will try my best to answer them!

@Kv.Hornblasaren Жыл бұрын

Vad trevligt!! Som föregående talare; ser man fram mot att följa detta!!

@christian-ov6rm Жыл бұрын

Fy fan va fint! Får mer inspo att jobba vidare med mina 900:or, ibland känns det överväldigande. Men med vetskapen att man inte är ensam med liknande projekt och vårdandet av Saab gör mig mer motiverad och glad. Tack! Ser fram emot att få följa detta.

@BoostyMoose Жыл бұрын

Vad kul att höra att jag kan inspirera andra också, tack själv!

Ең жақсы KZbin

Пікірлер