Hey Travis I still have this kit never flew it the esc say 30amp 1 to 3s but every person I see on KZbin fly’s 4s battery’s on this kit. If the escs are rated for 3s why does 4s not blow the escs?
@travisgrindal16 күн бұрын
I flew mine on 4S all the time.
@travisgrindal16 күн бұрын
The important thing is to stop flying occasionally and feel the ESCs. If they are not too hot to hold on your hand, then they're fine. If they are too hot to hold, then the batteries are too much.
@BlueaxolotlVR20 күн бұрын
You hold it down
@NoahVigil-o3s22 күн бұрын
Hi @travisgrindal ! I recently found my old innotab 3s and I want to set it up for my niece! I factory reset it, but for some reason the browser says access denied and says parental mode. There is a little person with a cogwheel in the bottom left that I assume is the parental controlls. But I cant click it. Do you know how to fix it
@mattl131922 күн бұрын
I wish you clearly went over the wiring on this. I bought the cam and the wiring in your link but I think I’m missing something. I don’t know where you got that female video cable that goes into the trunk. There is only a male video cable that came in the cam box that you said goes to the display. A more detailed description of the wiring would’ve be very helpful because I have no idea what I need to do now.
@richnguyen771222 күн бұрын
Hi, that cord at 5:00 minutes, where can I find that adapter to get power from my radio?
@absolute___zeroАй бұрын
What about *XT90NE* sold on aliexpress currently? what is the NE standing for?
@bravobhrАй бұрын
its working. thanks
@Jen-Nii7Ай бұрын
I will test it, thanks for the info 🙂👍🏼
@supersaiyanbroАй бұрын
Is there a way to add my own videos, i gave plenty of movies i just dont know how to add them
@MikeJones-rk1unАй бұрын
Advice #1, an impact driver will need a deep socket for the lower strut bolts. Also the sway bar may stop the arm from lowering enough to get the strut on and off. Try lifting both sides of the front end to let the bar pivot down. It is difficult to align the top bolts without help although I was able to with lots of swearing. I tried to only replace the upper strut mount but I found out the mount failed because a small section of the spring at the top had broken and would not fit the mount. I had to buy a new total strut assembly with my car up on jacks, unable to use the car to pick up the part. For a relative novice this job is a Biden. Good luck.
@bobm.1274Ай бұрын
I replaced the fuse, the actuator and the power module (by the spare tire jack) and I still can't get my hatch to latch. PLEASE, ANY IDEAS?
@Plasticshavings2 ай бұрын
the link now leads to malware
@dereksmith50192 ай бұрын
My three position ignition switch won't engage the third position , it used to , now the key will break first .
If you your worried about too much voltage they make a speed controller to move voltage up and down. Cool setup!
@zgr54213 ай бұрын
Mhmm... The frame looks a bit heavie. Only one prop at the bottom side.. Electric starter means shorter flightime. I've seen better designs.
@travisgrindal3 ай бұрын
LOL! So true... So true.
@matthooks58403 ай бұрын
Very helpful video but it still didn't work!
@travisgrindal3 ай бұрын
Ugh... how frustrating.
@raccoon_12313 ай бұрын
Thank you for this show. I pick one up from this video thank you :)
@edwardlawrence62503 ай бұрын
This video is very helpful for DIYers. I just replaced the sway bar on my 1998 Silhouette. Given how hard it is to reach one of the bolts on each bushing, the trick is to turn the steering wheel hard right or left to give you better access to the bushings and bolts. I could get a 15 MM socket on all 4 bushing bolts by turning the steering wheel. This trick also helps in removing the sway bar and putting the new one in. I stationed my wife on the other side when installing the new bar in to provide a little guidance so the bar ends up below the steering linkage. By moving the steering wheel, I did NOT have to jack the frame or remove part of the steering linkage to make the repair. I was surprised to see how shot my rubber bushings were just like those shown in the video. I have been getting some “clunking noise” over bumps and now think this may have been the culprit. Thanks for the video!
@RP-cm3df3 ай бұрын
I got one when I was like 10 years old had lots of fun with it, it’s still in the closet , for some reason it won’t charge , but great memories of it
@Ailasophia13 ай бұрын
JES 9800
@Ailasophia13 ай бұрын
Same but for an electric
@sam77w3 ай бұрын
That little screw was there on mine (probably on all), and I never would have looked for it if not for the video (saved me a "snap!!"). I've never had so many things go right on a project like this, and this video gets the credit for that. I did, however, change only the chrome handle. It was tricky removing the pins, but I never had to take out the old, painted casing.
@Sasha_Svarovski4 ай бұрын
спасибо. Помог понять
@plushbatfan4 ай бұрын
We did some Vtech Innotab Reviews with the Hello Kitty Learning Games.
@gordondahle78444 ай бұрын
My Silhouette defroster doesn’t work. Where is the actuator for the defrost?
@hellenmartini34724 ай бұрын
Fantastic information! Thank you. I have a couple of questions. Is the clasp strong enough to withstand the constant vibration of a Harley (I would hate for it to fly off), can the videos be downloaded to a cellphone somehow for those who don't have a computer, and lastly will the videos be smooth and vibration free on a motorcycle? Thanks to anyone with feedback 😊
@mikebeaulieu94854 ай бұрын
Good video. I have this camera, it is very nice for the price. I have done some very long videos with it while cycling. The only thing I dislike about it is that the mic picks up a lot of wind noise and while on a trail the bicycle noise travels to the mic. Again that to me is the only drawback. I installed a piece of foam to try and cut down the wind noise but it didn't do much.
@JustS0meNO0b4 ай бұрын
Love yhe people that do make vids on these cars, I thought Id have to go to mechanic for that and probably still will ask my neighbour nrchanic to help me out. Anyway thanks
@AdamM1514 ай бұрын
How long did the whole job take?
@travisgrindal4 ай бұрын
Maybe about an hour. It is relatively easy to replace.
@muhammadriasat55244 ай бұрын
This is such a bad video (would rather the inotab max)
@etherag5 ай бұрын
Thanks so much! Hugely useful video!
@randyt7005 ай бұрын
this video also demonstrates why toyota is one of the best makes, if not the best, out there because not only are they reliable but the little maintenance they do have, the engineers make it easy to take things apart, easy and affordable to replace, and easy to modify. you don't need special tools like for some other makes, looking at you bmw.
@douhghlie04445 ай бұрын
Thank you 🤘🏽
@user-dy4fo4mo3e5 ай бұрын
i used to have one as a kid
@stevekimball79315 ай бұрын
Thank you!!!
@gxbesgxbesgxbes5 ай бұрын
Either I bought this exact same 2005 Buick Terraza or there's a screw at the corner of every panel haha
@gxbesgxbesgxbes5 ай бұрын
Good job, Man. Straight to the point. Thank you for making this video.
@rafaelortiz68956 ай бұрын
This video worked perfect for me than you I wasn’t trying to splice anything
@mklsdv6 ай бұрын
Will it work with Camry 2012 LE?
@travisgrindal3 ай бұрын
I'm not positive, but my guess would be yes. Mine is a 2013 Camry SE and it also worked on my friend's 2012 Camry SE.
@ilieava5846 ай бұрын
Can you please do how to download Apps
@LoveGrowsAdam6 ай бұрын
Yes! Finally a helpful video!
@clayevandenbroeck11886 ай бұрын
Bonjour, je n'ai pas réussis pouvez m'aider a la passer sous betaflight svp ?
@qwertykeyboard59016 ай бұрын
Dear LORD! I just wanted to backup the entire NAND on mine for firmware archival purposes! So I need the device to be wipped but _nooo_ Leapfrog requires some god awful software that makes iTunes look like a well designed piece of software.
@ivancontreras35176 ай бұрын
good video, you will know what happens if I install a 1080p camera on a screen with 1024x600 resolution
@kwadwosomuahasiamah63746 ай бұрын
Just got mine unboxed. They have reduced the accessories now. It didn't include the charger head, handle bar mount and one other. I hope the quality has improved and you didn't mention anything about the battery life