Would love to see a programming of different make and model . Thanks. The Video was very informative.

I Can't See Due To It's Small

How are you connecting to the vehicle? Is laptop>jtool>obd2 port?

Most body shops will do those repairs

Hello I accidentally tried to loosen the welded nut on suspension frame, thankfully nothing happened and I drove the car since yesterday without problem. I am not sure but I think I easily applied 100-140nm torque on the welded nut white the bolt was still thight on it. Do you think the weld got cracked and I may have problems in the future? Or if weld cracked I should have heard it? I stopped when I saw that the wrench started to bend and did not push further but I used about 25 inches iron pipe on the wrench. Look forward to hearing from you.

Is it possible to program a used module such as blind spot modules, abs, etc.?

Hey bro... nice video. I have all of the tooling needed to reprogram a couple of new junk yard pulls that I got that I want to put into my truck. I want to enable a couple of additional features specifically with regard to the VPM to turn on some other camera views that were not available when the 2019 sierras came out, but were available on later models with a larger VPM. There are companies out tehre that charge an arm and a let to reprogram this stuff, but I have all of the equipment already, so I wanted to know if using this software, is it something that I can do myself? Id me willing to pay you a consulting fee so I can learn do to this myself instead of paying another company to do it for me.

Would you do this process for replacing a BCM?

Tinie B.S.

Nissan Pulsar 1.6 190ps Can this fix the p0090 and p0087 and start/stop problems on a nissan pulsar c13 2015’? Ive replaced everything in the car and the problem still there! I bought a new ecu new fuel pump both front and rear i changed fuel pressure sensor, fuel pressure regulator, maf crankshaft camshaft n75 sensors new battery two times! I also changed all the injectors and all the injection line-changed the fusebox-all fuses and relays-also changed oil for sure even the aircondition fluids-im frustrated

Can we add different languages to instrument cluster and Radio system?

😲😱😩

Does this sequence work with autel scan tool?

Is there anyway to get the programming files for free if anyone knows id appreciate it.

So you'll need about 3K in tools and programs lol

What about cast iron heads same process

Thank you bro, I'm in Uganda Africa i have a friend's car with me and it ad a problem with the truob and it used to accelerate by itself and i changed the accelerate padle season and i put on the digoss to clear the flts and now it is still beheving

Thank you for the information!! you sound very genuine to providing the details. Thank you.

So is it possible to add cruise control to an ecu that didn’t have cruise control?

Hi I have a 2010 Rogue and the ECM needs reprogramming, I have the Topdon Pro will that work on the Nissan or do I need a different Scanner

Hi there and thank you for the video! I know this may be a longshot leaving a comment here but here goes: I have a Drewtech SuperGoose and they say it will do what i need but i need some advice if you are able to: My friend has a 2012 Altima and the ECU is not recognizing one of the TPS signals and he has no throttle response. All wiring, throttle body, etc has been checked and it appears the ECU is just not recognizing the signal. So i got him a scrapyard ECU with the same service number and I'm a bit confused about the "Before ECU replacement" and "After ECU replacement" options. So i purchase the ECU file from Nissan using the VIN and then purchase Consult R2R license for 24 hours and start up the Consult software and attach my J2534 connection. I guess my question is when do I replace the old ECU with the scrapyard one? Like i said I'm also confused about the before and after ECU replacement options in Consult. Any help appreciated and I'd be willing to pay for any help you could provide (i can leave my email as a comment and then delete it later if you want to contact me). Thanks so much for your time.

Can I program 6T45 TCM ON BENCH MODE WIL WORK IF I CONECT MY INTERFACE STRAIGHT TO TCM LET ME KNOW THAO

thx for the video

I know its an old video but how about the k33 module for the hvac system

Thank you for the video. You also move around alot with the camera. Good job talking through the demonstration.

I have a question on this. I have a 2020 corvette I’m rebuilding that was wrecked. Previous owner installed a used rack and pinion that will need programmed. Is this able to program the used rack into my ECU?

This does absolutely nothing for anyone other than a nissan technician…….

Great video thank you for sharing all information, Hey I just did a manual swap to my 2004 frontier Supercharged 4x4 and I’m getting a transmission no communication, can the original ecu be programmed to manual or do I have to source a original manual ecu? If it can be programmed, are you willing to do the programing, I can ship it to you. Thank you in advance.

Hi, can I bench program a gen4 E38 ecm? I have all the needed tools (J2534, TDS license, etc) but I´ve never tried on a bech. It´s an LS swap platform (2010 Camaro SS donor) that needs an ECM replacement. I don´t have any other modules of the donor vehicle. TIA.

If I send you my onstar module can you flash it I’ll pay you

@apmotorsports5568 could you possibly reflash one for me if I sent it you a gm PCM. Thanks

Can you recommend a j2534 device that can get the job done without breaking the bank?

i wish to get more power out of a 13 nissan rouge how can i do that? sound stupid after i watched this video but like to learn install bigger injectors and squeeze stock power and do a rebuild to get aftermarket performance

Hi,nissan kick 2022 replacet the ecu same number from other car,i need to reflash it right? But consult asking me the 22digit pin wich i don't have because its not a new ecu from other car... what to do? Thanks

Nice.....solid....work!!!! :)

Hey is there a way i can connect with you? My 2008 altima is really acting up and the dealership told me they dont work on vehicles older than 10 years

Hey sir, if I am working on a 2004 Chevy Colorado that has a salvaged motor and new ecm... and I don't know the vin of the engine's origin... you got any advice?

Can this be done with Snapon D8? How do you get the reglash file into the ECM?

Was yelling at the burning bushing till you mention replacing em 😂

Great video!!!!!! was thinking of doing it as a business what is the best tools needed in your opinion to start with..

Can a auto shop do this? I don't want to go to dealership

Question: The speed nut on my 07 Avalon is square. I stripped the nut and bolt by accident attempting to reattach the lower control arm. It appears to be free-floating in there inside small metal walls. Toyota says the nuts can only be part of a subframe assembly (and they have no way of finding an individual nut like this). Nut is M16x1.5 Thread Pitch. I don't have any welding tools (just a Dremel I could cut a square hole with). I think the nut will just drop free then. The bottom of the sub frame already has a hole there (a plastic cover fits into it). Since I'm working in my driveway instead of a lift, would you just do the cutting(I think I'll have to tap a piece of steel sized to the original nut shape), reassemble everything, and then take it to have the square removed piece spot welded back on by someone? Very helpful video, thanks!

awesome thanks

I’m just getting into this. Which tool of the j2534 tool do you recommend?

Excellent video, thanks! I found it amazing how as you went along, you answered all the not-so-obvious questions that came to mind. This all is much appreciated!

Will work on Body Control Module to can activate the cruise control? My truck was coming without cruise control from manufacturer.

Just get anything but a Nissan next time... worst brand of cars and car issues that they refuse to recall but will happily send bulletins on how the issue can be corrected -by the owner and even instructions on how to do so. Took a lawsuit to get headlights replaced that almost killed people and anything within 5 feet of them at night and they still try to fight you on doing the job... went through two transmissions in less than 4 years and 38k miles total.... sends a massive multiple year/model effecting bulletin on how to remove your center console to replace the $600 gear shifter they acknowledge has an issue getting stuck in park- permanently....so they want to make sure you know how to spend that $600 and the hour + time it takes to do yourself... the right way.. cuz they aren't going to recall them and responsibility they were nice enough to let you know it's going to happen, right?! It's the damn park position switch inside the shifter mechanism that's less than $25 to replace but they will not ever admit it or even have the part available... has to be bought third party but works and resolves the issue 100% of the time... had a 2006 maxima back in 2007 and almost as nightmarish ... Nissan is trash and I'm just sad I even gave them a second chance years later only to be disgustingly disappointed. They are full of hot air like their garbage A/C compressors control valves... salvageyardwasteland

Cool video, can you please show how you connected this same module you are reprogramming? Thx!

But can you add a module, like let’s say a VPM, and program it to work within the vehicle network?

Hello can I pay you to flash out program my BCM?