Those pipes definitely going to let creosote through my friend. Be safe. I also had the damper give me grief for years. Once headed it just wanted to flap around in there an not stay flat. But the more you go the more you'll know and be able to get her dialed in!

Good coffee

So my pump went, I need to winterize. Not sure of how to go about it now,

I just purchased the same converter. I relocated the new lithium battery next to the converter. Next, called WFCO, and based on WFCO direction. I changed the 2nd fuse from bottom to a 40 (marked Red position). I ran the battery down to 0% (yes, that’s what they said to do). Charged on shore power to 100%. It doesn’t turn blue until after the first full charge is completed. At this point, it’s working great. The prior converter never worked well, I bought the trailer used. Edit: I unplugged the shore power last night, and ran battery down to 97%. Plugged 110 in this morning, and battery is charging at 14.3. WFCO stated the sweet spot for charging is 14.6. So, pretty happy with the 14.3 🙂👍

Looks good

How many gallons did it take you?

Nice tent like the French f1 on steroids…have fun stay safe.

It is not a battery charger, it is a vehicle jumpstarter. I’ve had mine for four years and it’s been working flawlessly. Also holds a charge for quite a long time. I had charged it and left it in my truck for about four months and I had to use it on my camper van right now and it worked fine. 🤙🏼

Great video. Interested in getting one myself once Christmas is out of the way haha

Wish you would have showed the six pin, the jumper and device?

I bought one recently, too. I have camped in it a few times with no issues yet. Let me know what you have seen about the leakage you mentioned on the side seams. I may want to treat those seams before I really depend on it for next summer. Thanks for the video!

Hello from Lower Michigan Hillsdale

Nice

2:49 well we know one thing you’re on the north country Trail

Where you camping at in Michigan

Wow

That'll work

No pin hole in mine but making a wining sound... Any chance a fluid change would help/prevent this damage?

maybe actually smoke some cheese next time

Yum

Good review keeping coming

Thanks so much. Email already sent!

So this jumper forced the box to a lithium profile is that correct? Can you tell me someone specifically at WFCo to talk to please? Thanks for this video! Great news!!

Mint oil

What about windows

Sehr schöne Video 😊

It doesn’t get much better than this. Thank you from us convalescences

1

Our leaves are starting to change too and today is only 9/14/24. It's still summer!!

Looking forward to the trail cam

Don't be alarmed but, your buddy looks like he is _unalive_ 🤔

The funny thing is is when the fan turns on the unit is warm in the family continually run until you turn it off and it cools down so you're really only get a few minutes of no fan when you first turn it on

What kind of stuff can you run reliably (heaviest load) on 400w?.. I’d assume stay away from sensitive electronics being modified sine.

Yes

I think I see a person who realized there is a camera and ran out of frame as soon as he noticed the camera.

Mine still works after 4 years. Im blown away!

Nice video....I have a wfco wf-8735p model charger working very well, I want to do an update for a 12v 250ah gel battery and I wanted to know if the charger (wfco wf-8735p) can charge it without any problem. ...could you guide me if I can do that update?...thanks

did you get a full charge of your Lithium battery after you got it installed?

Did you happen to test that jumper with a volt-ohm meter? I'm wondering if just installing the proper resistor would do the trick. I'm on my second attempt to get the charger to auto-detect my 200Ah LiFePo4 battery bank.

Thank you

What is the email for WFCO? I am having the same issue. Thank you in advance.

Yep

Lots of fun

How did u do it?

I'm going thru same thing with 8955, I reduced the wire length to 5'. Helped a lot with amps but still in LA mode. Getting full 55 amps when charging now. I emailed WFCO for a jumper hopefully I will get one. Great video, thanks for sharing!

Ayup, running into this b.s. with a WFCO WF-8955-AD. My camper has 8 gauge battery wire, so there's a large voltage drop from the WFCO to the Lithium battery. In reading forums, it looks like the WFCO never goes into Bulk mode as a result, and, obviously, the "AD" doesn't do the right thing. This is a HUGE failure on the part of WFCO and the RV manufacturers, as it renders the WFCO charger impotent -- and it breaks this "Auto-Detect" "feature." (As an aside...I had another thought as well: The voltage coming back out of the battery to the power distribution center would also drop in voltage. How does that affect the 12V items in the RV? And if you upgrade the wiring, what happens when the full Lithium battery voltage is applied to the stuff in your camper? It "should" be able to handle it, but...) I made my own jumper to get the WFCO into Lithium mode. I read it's a 1K resistor. Do you think you can Ohm yours out and see what it is? I'd like to know for sure. Anyway, I tried that 1K resistor, and the charger did go blue and start pulling about 700W, but AFTER THE BATTERY CHARGED IT WENT BACK TO GREEN. Are you seeing this? Anywhos, I'm looking at options for my waste of $200 on the WF-8955-AD. I may pull the charger and move it where the battery is to see if it actually works. I may disconnect the WFCO charger completely and buy a separate charger (Progressive Dynamics or whatever) and put that next to the battery. It would have been nice if WFCO and the RV manufacturers actually got together on this and worked it all out, but it looks like WFCO only benched tested their stuff and the RV'ers just slapped it in without regard to wire gauge. "8 gauge supports 55 amps, so what's your problem!!?!?!? Whaddya mean voltage drop!?!?!?!" Sheesh. Oh, I have contacted WFCO support just recently, and I got the same questions you did. I have since been told that the voltage drop is preventing the WFCO from functioning properly, that has ramifications for charging and the battery, and that's that. They didn't offer a jumper. I have read that Lithiums do need to be charged properly to 100% periodically. I have a Victron solar charger that does work and will do Bulk and Absorption modes, so at least that tops off the battery. I have a NOCO Genius 10 that will also do the Lithium charging when I have the battery in storage over the winter. But IMO the WFCO and the camper people really need to step up. Thank you for sharing your experience with this.

You didn't buy me a new camper!

Seriously informative. Thank you. Straight and to the point.

Its the firmware!!! Dude, just contact WFCO and give them your address and ask for the "jumper" for the 6 pin location in the MBA. Stick the white jumper on that 6 pin, and it will charge at lithium ONLY. That's what I did for my WFCO 8955 MBA - AD unit. Then make sure to put a notification sticker somewhere on the unit for the next owner that its set to LITHIUM ONLY.

Thanks for the video I just got a lithium battery, and I have the same converter, I was thinking of getting the new one but I’m unsure with all the problems I’m seeing.