Fuck, you get caught hosing down your slurry in to a storm drain is an instant 10 thousand dollar fine atheist here in california.

E wire

Greetings! I see videos explaining how to install the loops but I don't see videos explaining the device or the software that calculates the speed and how this calculation is done. .I would like to know, to calculate the speed, from the signal sent by the central of inductive loops, is it used a microcontroller or is there a software for PC!? I will be grateful if you can give back..

A lot different than the way my job does it..

These guys are absolute idiots. LOOP LORDS REIGN SUPREME

13 jan 2020 1:46 pm est:traffic-light-with-car-presence-detector makes variable-green-light-time-duration, should be publicised so car-driver can be prepared and decrease brake-pad-lining-milimeter-wasting. non-descript traffic-light-with-car-presence-detector-without-count-down-timer, can make car-driver brake-hard degrading brake-pad-lining-milimeter a lot. 25 feb 2020 6:21 pm est: is this possible ? make traffic-light know whether there is approaching-car or not from minimum-distance around 1/2 mile. if there is approaching-car from minimum-distance around 1/2 mile then restart green-light-countdown-timer for n second. n second is time-duration needed for approaching-car to pass traffic-light with speed 20 mph. if there is no approaching-car then traffic-light is free to show red-light to allow car from other intersection-direction pass. so probability of : hard-braking and brake-pad-thickness-degradation, decrease.

I wish they were good enough to detect bikes... sick of that annoying feeling when the cars due to go after u get a green light 1st :(

Hi Gary, what is best way to get in touch? The TurnCount app we purchased a year ago has stopped working...

much easier and faster way to put loops into the road,dis more than 2000

i do this job in newcastle upon tyne england and our way is so much easier than this

Currently working on a university project involving this type of technology. Is it possible to email this video to me?

Is there a time stamp of each event? I want to calculate the delay of the bus, arrival time at the intersection minus the departure time at the intersection. I was thinking that the arrival time would be an eastbound vehicle swipe and the departure time would be a westbound vehicle swipe, then the data would go into excel where the actual delay time can be calculated.

somebody must be getting a lot of kickbacks from these loop detectors; green wave or synchronized traffic coordination for smooth flow control is so much better, simpler, and makes more sense, but common sense is not that common these days anymore

Well, this is not a professional way to install the induction loop. It is a mess.

Hi Gary, With my slip lane layout, pedestrians cross LT and RT lanes where they cross (3 phases) so pedestrians cross shorter distances than conventional intersections. Examples are at quicksafeintersections.com and the phasing is in the last slide of the "Flow" subject. Each turn movement is individually timed and I have used fixed times. But the controller needs to allow for pedestrian presence detectors and shorten or extend the pedestrian times as required. Great series thank you.

Hi Gary, coordination is usually with double cycling when matching 2 phase cfi with 4 phase conventional. Sidra provided the timing splits for the main intersection and the crossovers for example, a 39/21seconds split at the main intersection and a 46/14 at the crossover. But 14 seconds (less 6 intergreen) leaves 8 seconds (4 cars) per lane for the turners so I need 4 lanes crossing over in a dual-tandem arrangement to ensure that the crossover does not become critical. I then link the cross-overs at the speed limit with the extra time giving those that have just turned time to clear early. the thru traffic can then proceed in a green wave. Another consideration for spacing is the green phase queue length for all lanes so that they are fully using the green time. Regards

Interested to know the total cost of this installation. Including labor and material. We have a solution for much simpler process.

Thts how to install loops badly

Thanks for the upload.

Let me know if you want to buy some Loop sealant or wire! I sell it in Orlando FL.

Buy a cordless drill you fools!

If you ride a motor cycle or bicycle and want to increase the chances you are detected by a loop, stop your bike over the long, loop edges (rather than the middle). The loop is most sensitive here, and you should see a big improvement in being detected. Otherwise, call the signal maintaining agency. They may be able to increase the loop sensitivity in the amplifier or provide a non-intrusive detection method (e.g. video or microwave).

will magnets on your motorcycle frame help let it know your there, these are a real pain in the ass for us riders?

How deep is the saw cut for the loop wire? If a loop detector is installed in a parking garage slab for a gate, is the saw cut likely to be deep enough to damage the reinforcing in the slab? Or is the cut shallow enough to avoid hitting any rebar (less than 3/4" deep)?

Is there any similar applications using Samsung iPad?

That would work well with the Omnibird Product.... Check it out, Omnibird.com

Very informative. Thanks for the upload.

Bidding a job with a few of these. I Didn't know what they were, now I know - thanks for the vid!

nice vid

is there such a thing?

Interesting videos lots of stuff I didn't know! Did not realize how complex this set up was.

I don't care where it is. It was a rhetorical question. Go to 4:30, power washing that street right into the drain will get you fined. It isn't ground water, it's surface water. Nice on calling me stupid, real nice.

what state are you in? awesome storm water quality protection - self incriminating

@WolfGuy100 I'd love to put it on Android, but I don't think there are enough Android users that want it. Email me at [email protected] if you want it on Android.

This should on Android phone

@cruzito408 Video was recorded near Dayton, Ohio

where was this video recorded??

not what i would call a safe lane closure