Very pretty! Well done Darl… you did great! Much love from Nat. (Brisbane, Australia) ♥️♥️🇦🇺
@TheResinatorByJulesКүн бұрын
Thank you so much!
@Soifdesang93 күн бұрын
I've watched three of your videos. Please take this as constructive criticism. PLEASE zoom in so your work looks at least 4 times bigger while you are recording, you look like you are several feet from the camera. And take really good close-ups when you are doing anything important and of the finished object. Thanks!
@TheResinatorByJules3 күн бұрын
Thank you, I have my next two videos recorded but I'll try the next one I record closer up xx
@MsElainebowen4 күн бұрын
Wow I don't think he needs eyes, but maybe use a different colour flakes just in his eyes?
@MsElainebowen4 күн бұрын
Congratulations!!
@TheGeeza0016 күн бұрын
Love it Jules! Keen to see some more! 🙌🏼🫶🏼
@TheResinatorByJules6 күн бұрын
Thank you! I put videos out on Tues, Thurs and Saturdays xx
@mattersofthehartbynat88156 күн бұрын
That is really pretty… well done! Much love from Nat. (Brisbane, Australia) ♥️♥️🇦🇺
@TheResinatorByJules6 күн бұрын
Thank you, I did keep this one for myself lol
@MsSnailspace8 күн бұрын
congrats to the winner!!! xo
@Turtledove728 күн бұрын
What a lovely thing to do. 🥰
@mattersofthehartbynat88158 күн бұрын
It is a lovely thing to do! Congratulations Regina! And, look at your growing channel!! 169 subscribers already (at the time I’m writing this of course!)! Well done Jules… you are so deserving! Much love from Nat. (Brisbane, Australia) ♥️♥️🇦🇺
@Turtledove729 күн бұрын
Great video. Thank you What would you think about doing the clear layer before the black? Then it will not deter the powers to much?
@TheResinatorByJules9 күн бұрын
That's a good idea, I'll give that a go next time I do these. I just bought some finer brushes so I'll be doing these again soon x
@Turtledove728 күн бұрын
@@TheResinatorByJules I’m defiantly going to give these a go. 🥰
@mattersofthehartbynat88159 күн бұрын
I was so pleased when you got him out of the mould… I was yelling at you to stick your thumb in holes and pull his thighs out!! That’s always the first part to do on him. He takes 120ml of resin and I use 6mm eyes and they fit really well… just be sure to get them in his eye socket and not in his eye lids! 😂 He turned out so pretty and shiny! You could just use a permanent marker to colour in his eyes? Much love from Nat. ♥️♥️🇦🇺
@TheResinatorByJules9 күн бұрын
Lol Thank you, I have started to write the amount of resin it takes on the outsides of the mould so I know for next time. I'm off to get some 6mm eyes now!
@SASSY_RESIN_GAL9 күн бұрын
The struggle is real trying to get the frogs out...🤣 Love the color.
@TheResinatorByJules9 күн бұрын
Thank you, I'm sure I pulled something getting him out lol
@SteveTrimmer10 күн бұрын
I absolutely love the colour and finish on this- I'd like to see more projects done with this stuff!
@mattersofthehartbynat881511 күн бұрын
You had me in fit of giggles, watching you try to demould!! 🤣 🤣 He turned out just beautifully… I love the colour! A little hint… if you mark the back of the eye with a pen, make a line the same direction as the line on the other side… it makes it much easier to get them in, so they end up the same on each side. Much love, Nat. ♥️♥️🇦🇺
@TheResinatorByJules11 күн бұрын
Thanks for the tip...that makes perfect sense and I will definitely do that next time. Honestly, I thought he was never coming out of that mould and I couldn't stop giggling myself...I was one hot mess by the time the little dude came out lol
@NicksMommy8613 күн бұрын
Hi dear, you’re talking about needing jump rings forget the jump rings and get yourself some pinch bales and they’ll look much prettier too the fit perfect and by the way, I love your artwork. It’s beautiful.
@TheResinatorByJules12 күн бұрын
Thank you so much and thank you for the tip. I'll definitely try pinch bales xxx
@Lizzard-ef4lc4 күн бұрын
Pinch bails really are the way to go on pendants. They may be difficult to find tho
@lindalee540813 күн бұрын
Beautiful embedding! But I don't understand why you scratched the backs. Whomever buys them will take them off of the card and the backs will be scratched. Pocket hugs are for carrying around and fondling, right? They're not going to leave them on the cards permane. Double stick tape understand work perfectly.
@TheResinatorByJules13 күн бұрын
Maybe I'm the only one who put mine on display and didn't take the heart off 🤥 Thanks for the tip...I'm learning all the time 😘
@TheResinatorByJules13 күн бұрын
I suppose you could take it off or leave it on so I'll switch the double; tape from now on lol
@lindalee54089 күн бұрын
@@TheResinatorByJules the tape works perfectly...
@TheResinatorByJules9 күн бұрын
@@lindalee5408 I found some glue dots at the back of a drawer and tried those. they peel off easily but secure the heart to the card too. Will definitely get some tape though 😀
@mattersofthehartbynat881516 күн бұрын
Wow… that looked like a fiddly job!! I had to laugh at you making a mess… it was like watching myself work with resin!! 😂😂 I hope the alcohol ink one cured up ok… cause it was my fave! Much love from Nat. ♥️♥️🇦🇺
@TheResinatorByJules16 күн бұрын
It was so fiddly lol. I have got to the point where I just go with the flow when it comes to my messiness and on-camera accidents lol. The alcohol ink one is my favourite too so I really hope it cures xx
@mattersofthehartbynat881518 күн бұрын
New subscriber. These pendants are really pretty! Much love from Nat. (Brisbane, Australia) ♥️♥️🇦🇺
@TheResinatorByJules18 күн бұрын
Thank you so much!
@denisestich873119 күн бұрын
Those turned out really cool looking, especially the red one.
@TheResinatorByJules19 күн бұрын
Thank you! The red one is definitely my favourite. I learned a lot from doing these and hopefully the next ones will be even better.
@bzlilthisandthat20 күн бұрын
I love watching your videos! Thank you so much for sharing! Please enter me in the giveaway!
@TheResinatorByJules20 күн бұрын
Thank you so much! I love making them. You're in!
@ZAGAL513422 күн бұрын
Bonjour et merci pour le partage, j aurais une question svp, pourquoi vous ajoutez du silicone avant de mettre la résine,merci pour votre réponse. Cordialement 🌺
@TheResinatorByJules22 күн бұрын
Bonjour. J'utilise le spray silicone car il permet de démouler plus facilement la résine du moule et augmente la durée de vie du moule. Hello. I use the silicone spray as it helps to release the resin from the mould easier and it increases the life of the mould
@toieiland-mcdonald21124 күн бұрын
Good job. 😊
@TheResinatorByJules22 күн бұрын
Thank you! 😃
@CatherineSummerfield25 күн бұрын
Thank you for you time and expertise !! xx
@TheResinatorByJules25 күн бұрын
Thanks for watching!
@SuperLinuxAudioGuru25 күн бұрын
A Manchester United clock would look much better lol, nice work though :)
@SuperLinuxAudioGuru25 күн бұрын
Oh maybe try a bunch of elastic bands or a large rubber grommet wrapped around the circumference of the back part of the clock and twist it into place ?
@TheResinatorByJules25 күн бұрын
Great idea!
@TheResinatorByJules25 күн бұрын
LOL! Each to their own x
@janewood38827 күн бұрын
Lovely bookmarks. Really colourful xxx
@TheResinatorByJules27 күн бұрын
Thank you x
@SteveTrimmer28 күн бұрын
Now this is a success! I love the colours, especially the camo-looking one. Nicely done.
@TheResinatorByJules28 күн бұрын
Thank you! I'm so happy with them, especially after the last disaster!
@cherylbrowning884528 күн бұрын
If you would put us closer to where we could see what you’re doing it would be easier for us to enjoy what you’re doing
@myqiheart9487Ай бұрын
Suggest with thin layers of resin,decrease lamp time. Too long will allow resin to separate from mold edges.
@myqiheart9487Ай бұрын
And use mirror under mold to cure from the bottom.
@TheResinatorByJulesАй бұрын
Thanks for the tip
@stephanieproud2513Ай бұрын
These are cool. I cant wait to try this.
@stephanieproud2513Ай бұрын
I'm somewhat new to the UV resin and im loving it. I love your technique for your pendants and am now watching your beach scene. I'm so glad I subscribed to your channel. Can't wait to see these finished❤
@TheResinatorByJulesАй бұрын
Thanks so much 😊
@MsElainebowenАй бұрын
I see 52 subscribers!!
@TheResinatorByJulesАй бұрын
It was less than 50 at the time of posting. I’ll be announcing the giveaway soon x
@MsElainebowenАй бұрын
I love the pink!!!
@TheResinatorByJulesАй бұрын
Lol, I think it's a bit of a dirty pink, I thought it was going to be a bit more delicate!
@MsElainebowenАй бұрын
🤘🤘🤘very cool!!!!
@TheResinatorByJulesАй бұрын
Thank you xx
@MsElainebowenАй бұрын
Oh I love these!! I'd love to see a heart in emerald green 💚 and purple 💜 as that's gonna be the colour theme at our handfasting!! Do you have a stag mould?!
@TheResinatorByJulesАй бұрын
Thank you. I have a stag keyring type mould
@louisedavies1666Ай бұрын
❤ ahhhh sooooo cute. X
@TheResinatorByJulesАй бұрын
Thank you, I did toy with the idea of putting googly eyes on it and making it look weird lol
@louisedavies1666Ай бұрын
Yes, the weirder the better lol where did you get the mold from? I keep saying I'm going to start a channel on here. I talk to myself when I'm crafting so I thought if I start a channel, at least it will be less like I'm talking to myself lol@@TheResinatorByJules
@TheResinatorByJulesАй бұрын
@@louisedavies1666 Temu, you should definitely start a channel, I would subscribe!
@lindalee5408Ай бұрын
Beautiful work, good to find you here! What if you used a dab of resin and cured it. It would glue the bits down and they couldn't move. Then add the filler resin? I do that when adding items.
@TheResinatorByJulesАй бұрын
Thank you so much, it's lovely to meet you and thanks for the tip!
@SteveTrimmerАй бұрын
These are just great- stunning colours! I think you're onto a winner with the sinker white thinned out a bit. Even the ones that "blobbed" look like sea spray- good choice on the nautical colours with those pieces!
@TheResinatorByJulesАй бұрын
Thank you!
@MsSnailspaceАй бұрын
beautiful! i think you have a knack for petries!! xo
@TheResinatorByJulesАй бұрын
Oh thank you so much, I think these may have a fluke xx
@MsElainebowenАй бұрын
oh they are gorgeous!
@TheResinatorByJulesАй бұрын
Thank you x
@MsSnailspaceАй бұрын
so cute...you've inspired me to try a ring mold :) xo
@TheResinatorByJulesАй бұрын
Go for it! It's a bit fiddly but worth it. I'm going to have a look for some more ring moulds now xx
@subhavishnuАй бұрын
The tiny bowl is candle holder
@TheResinatorByJulesАй бұрын
Ahhhh Thank you! I would never have guessed that. I'll give it a try
@rubymorris1971Ай бұрын
I’m loving the videos Really informative interesting and handy Being an absolute beginner I wish you’d make a little video introducing resin art for those of us who are 100% new to it. It’d be nice to see the Resonators face if only once 😊 Can I just say a massive thank you though because with your in depth fun videos I’ve absolutely no need to go to an expensive workshop I definitely will be buying you a coffee ❤ruby
@TheResinatorByJulesАй бұрын
Thank you so much Ruby, I really appreciate your kind comments. Thanks for the coffee too!
@SteveTrimmerАй бұрын
This is your best piece yet. I absolutely LOVE these. I think they'd look great in black and gold.
@TheResinatorByJulesАй бұрын
Great idea! I was also thinking black & copper.
@SteveTrimmerАй бұрын
@@TheResinatorByJules oh now that sounds epic!
@robinpinkham9398Ай бұрын
❤😊
@3dprintingbird554Ай бұрын
They're pretty awesome looking! You should do resin coasters...you can literally put anything in them! I've done bottle top ones...I'm sure Steve has some old computer hardware you can take apart and use to feature in a coaster :) Keep up the good work! (Mikey B)
@TheResinatorByJulesАй бұрын
Thank you! What a great idea, I bet he has loads of stuff like that I could use. Watch this space for coasters though ;0)
@MsElainebowenАй бұрын
These are stunning!!!!❤
@TheResinatorByJulesАй бұрын
Thank you! 😊
@MsElainebowenАй бұрын
These are lovely need a little fishy or an octopus or starfish next time xx
@TheResinatorByJulesАй бұрын
Thank you, definitely, little starfishes I think x
@kyleisarat887Ай бұрын
The first time you pressed the button on the uv lamp you fliped off the camera 😂😂
@TheResinatorByJulesАй бұрын
LOL, I hadn't noticed that!
@SteveTrimmerАй бұрын
These came out really well I think. Nicely done!
@TheResinatorByJulesАй бұрын
Thank you so much.
@MsSnailspaceАй бұрын
they turned out very nice! i love the sea theme! thanks xo
@TheResinatorByJulesАй бұрын
Thank you, I really enjoyed this one!
@alishamae20892 ай бұрын
They look like space for sure!! Like a galaxy ❤
@TheResinatorByJules2 ай бұрын
I might have to try the safe mistake with darker colours and see if I can make them look more like space lol