3 жыл бұрын
4 жыл бұрын
4 жыл бұрын
4 жыл бұрын
4 жыл бұрын
4 жыл бұрын
4 жыл бұрын
4 жыл бұрын
Пікірлер
@godaboveall8344 2 ай бұрын
My doors dont have a groove in the center for weatherstrip, just flat, trying to figure out what to use in my case
@beachdweller3378 3 ай бұрын
This is great. i have similar door. was trying to figure out if all i needed to do was pull on the weather stripping to remove or if there was some disassembly required
@58hicks Жыл бұрын
I tried using that type of weather stripping on my French doors and it was too thick and the doors would not close together.
@raffakele Жыл бұрын
Hi! Thank you for the video! Can I ask you what weather stripping did you use for the bottom of the door and where you can buy it?
@kajunchronicles3001 Жыл бұрын
Thank you so much. This is the exact video I was looking for.
@antorreon Жыл бұрын
Thank you Sir!
@summergoldsmith7751 2 жыл бұрын
Can you check my patio glass door
@BewareTheLilyOfTheValley 2 жыл бұрын
As this video started, I said to myself, "You guys (home DIY channels) are the unsung heroes of KZbin," lol. I used DIY channels to teach me how to disconnect my washer in prep for the new one that arrived yesterday, and now, I'm shivering in my house because of the draft from my patio, lol! My doors slide open, so they're not the same, but maybe I can put some weatherstripping in the space between the two doors (I very rarely go on the patio, so it's fine if it prevents the door from opening).
@delilahrainelle7158 2 жыл бұрын
I understand what you’re showing me, but I’m just not capable of physically removing the doors and fixing it.
@kajunchronicles3001 Жыл бұрын
He shows how to do it without taking off the doors.
@hustleandfun 2 жыл бұрын
I just wanted to let you know that you are awesome! Keep up the great work with your family, church. I know you will be blessed! Keep putting out the great content.
@dirtyclothesdad6343 2 жыл бұрын
Thank you, that is very kind.
@hustleandfun 2 жыл бұрын
@@dirtyclothesdad6343 we need people like you sharing their skills and lives on here to have a positive impact on others!
@hapakifranco1647 2 жыл бұрын
Oh man Don! That is something that completely terrifies me with our house. I would have absolutely no idea what to do. Good job!
@firazeli 2 жыл бұрын
Awesome video!
@dirtyclothesdad6343 2 жыл бұрын
Glad you enjoyed it
@damonlee9836 2 жыл бұрын
What's with the beeping? I couldn't get past the first few seconds. This video is useless without decent audio.
@dirtyclothesdad6343 2 жыл бұрын
I'm sorry to hear it didn't work for you.
@DoyleTerry 2 жыл бұрын
Not perfect for you? Maybe you should make one. LOL Good ....... work Dirty Dad. Thanks for making this video. It helped me a lot!!!
@tylergmorales17 3 жыл бұрын
My weatherstrips appear to be screwed in. Is the process much different? Are only more recently manufactured doors made with that slot that you press the stripping into?
@martinkent333 3 жыл бұрын
FROM VIRGIN BIRTH TO GLUTTONY...................
@leeleeonthemove 3 жыл бұрын
Thanks soooo much!!
@justmyopinion2 3 жыл бұрын
What a fun dad!
@dirtyclothesdad6343 3 жыл бұрын
Thank you. We do have some fun.
@victorreza9463 3 жыл бұрын
Your video was very helpful thank u
@dirtyclothesdad6343 3 жыл бұрын
Glad it was helpful!
@NotDayWalker 3 жыл бұрын
Damn didn’t know luise ck is into construction as well
@dirtyclothesdad6343 3 жыл бұрын
hehe.
@jamshedkh6478 3 жыл бұрын
Louise CK doing DIY project videos eh
@dirtyclothesdad6343 3 жыл бұрын
Haha, I've also been told I look like Vladimir Lenin. :)
@mohajeramir 3 жыл бұрын
Awesome. Looks exactly like my door. Thanks
@dirtyclothesdad6343 3 жыл бұрын
Glad to help
@juliepoetker5824 3 жыл бұрын
Kill the music Way too loud
@dirtyclothesdad6343 3 жыл бұрын
Thank you for the feedback. I'll try to balance the music better for other videos.
@DelishiaB 3 жыл бұрын
😆 looks simple thanks
@dirtyclothesdad6343 3 жыл бұрын
yeah, not too bad.
@zehuazhou3390 3 жыл бұрын
I spent a few hours and finally figured out how to align the doors properly. Now the center strip contacts the right door from top to bottom. That’s a great step forward. Right now the center bottom still has a hole. I wonder if yours has a hole there too？
@dirtyclothesdad6343 3 жыл бұрын
Well done! Yeah, mine has the same thing where the center strip doesn't quite go all the way to the threshold, so there's that small gap at the very bottom that doesn't seal. That's okay.
@zehuazhou3390 3 жыл бұрын
Thank you for the video. I have the same door as yours. My problem is that the right door is a little sagging, so when closed, the lower left corner of the right door does not contact the weather stripping, and there is a gap and wind blows in. Could you give me some advice regarding how I should fix that?
@dirtyclothesdad6343 3 жыл бұрын
I can offer two suggestions. First, a sagging door is often a sign that some of the hinge screws have loosened. If that is the case, you can easily improve the situation by simply snugging up the screws holding the hinges. Second, you may also be experiencing a slight warping of the door. I saw this also with my door, where the top of the door was in contact with the weather stripping on the center bar, which is attached to the fixed side, but the bottom of the door was pulled away a couple of centimeters, leaving room for the wind to blow through. To address this, I adjusted the location of the hole in the threshold to pull the bottom of the fixed door slightly inward. A little tricky to do because you have to fill in the old hole before you can drill the new one. I used a short length of dowel the right diameter to fit snugly in the old hole, putting wood glue in the hole and then tapping the dowel in place with a hammer. After letting the glue dry for a day, I was able to drill a new hole slightly offset from the original to close the gap and bring my door fully into contact with the center weatherstrip from top to bottom. If you can solve the problem with a minor adjustment like that, it is sure a lot cheaper than replacing the door/frame.
@zehuazhou3390 3 жыл бұрын
@@dirtyclothesdad6343 thank you! I think there could be some loose screws because when the door is closed, I can see the bottom hinge closing tightly but the top hinge has a little 1/4 inch gap. But I don’t have any idea how to adjust that because I don’t see any loose screws.
@issamenu5en5e29 4 жыл бұрын
not trying to be the smart ass here bc ive learned alot from this video but instead of wasting 5-8 mins taking a measuring tape and measuring each piece pf weather strip couldn't you just put it on the door and cut the excess off? i figured maybe you're just doing that for video purposes in case somebody isnt as handy as we are. im getting ready to do my metal glass panel french doors from 1992. im pretty sure this is the first update to them lol
@dirtyclothesdad6343 4 жыл бұрын
You certainly can do that, but you'll have to fudge a bit to cut the part of it that is inserted into the channel on your door.
@pepperadams1331 4 жыл бұрын
That sure was a BRIEF video 😉😆😂
@DonTheCellist 4 жыл бұрын
Set phasers to "pun"!
@dirtyclothesdad6343 4 жыл бұрын
haha! Well played.
@sarahs.8216 4 жыл бұрын
Thank you so much. My dad has been absent for a bit. I recently bought a home and have been feeling overwhelmed with projects, not having anyone to help, you know? thanks for making this feel more doable with your step by step videos.
@dirtyclothesdad6343 4 жыл бұрын
Thank you for sharing that. I'm so glad my videos have helped you.
@dirtyclothesdad6343 4 жыл бұрын
What other projects would you like to see?
@raleigh6589 4 жыл бұрын
Nice one!!! I think you deserve lots more views. You should use smzeus . c o m!! It is the fastest way to grow your KZbin channel, and also works for any other social media profiles you may want to promote!
@theplaguedoctorshaunt9787 4 жыл бұрын
Great minds think alike. kzbin.info/www/bejne/iIHTgKJppM-BopY kzbin.info/www/bejne/eYi2mImEf9qFr7s
@dirtyclothesdad6343 4 жыл бұрын
Fun!
@TheSherilyndria 4 жыл бұрын
What a fun idea!! It looks great too :)
@dirtyclothesdad6343 4 жыл бұрын
Thank you! 😊
@jodeeleahy7546 4 жыл бұрын
What a fantastic family project!
@dirtyclothesdad6343 4 жыл бұрын
It was a blast.
@jodeeleahy7546 4 жыл бұрын
Love your garden! It's so pretty and huge! So jealous!!
@dirtyclothesdad6343 4 жыл бұрын
Thanks so much! 😊
@tallandcurlyjr6063 4 жыл бұрын
Is that the cuteness runnin around the whole time? -Lazarus Carmack
@dirtyclothesdad6343 4 жыл бұрын
Well spotted! He's 15 years old now, mostly blind and deaf, but still kicking.