Russ989

Пікірлер

@omchunter6988 7 күн бұрын

Man that is sweet. I just got a new 24' 1000-5 deluxe. I want to do a front light bar and one in the rear for a back up light. I will definitely have to look at this set up. I really like how simple and clean this is.

@sucapizda 10 күн бұрын

You didn't show us how it works in the end. Holly crap, what a let down lol.

@dpigme 12 күн бұрын

I bought the factory manual Where is it in the manual page and section I cant find it

@dpigme 13 күн бұрын

Does anybody know where this is in the service manual? I have the Honda service manual that I can find nowhere in the manual please give me a page number and section

@shawnmetts8010 26 күн бұрын

Do you have to put it auto reverse every time you use the machine? Or can I leave that on and just turn the key off. If I just turn the key off, will the switch light stay on a kill my battery. I have the dual light now and considering adding the switch.

@russ9897 26 күн бұрын

You can run the lights independently and if you shut them off it kills the power to the lights and backlighting on the switch.

@ODellGarage731 2 ай бұрын

what did it make you top out at? factory is 67 ish

@elmerfudd7674 3 ай бұрын

No, no.............I didn't want to know how to adjust it. I just wanted 6 minutes of nothing. My God.

@TheRottydog 3 ай бұрын

Too much digital masturbation,get to the video

@joelhall7176 4 ай бұрын

Any loss of power?

@fomocowboy 4 ай бұрын

Take the buckle apart, take the magnet out and carefully place it in the trash.

@frankashby6235 4 ай бұрын

SO how about a link to fix this?? I had to replace the cable to the rear differential as it had broken right at the adjusting device in that gear box

@StarknightMT_official 7 ай бұрын

Hello, Are you interested in testing our products? We would like to invite you to test the UTV Rear Window for your Honda Pioneer 1000

@russ9897 7 ай бұрын

How does it compare to the OEM?

@StarknightMT_official 7 ай бұрын

@@russ9897 it can replace 0SR95-HL8-211B

@StarknightMT_official 7 ай бұрын

@@russ9897 it can replace 0SR95-HL8-211B

@percebu2 9 ай бұрын

Your switch wires are plugged into what? An aftermarket buss bar? If you install the kit to make the 3 Honda factory 3 amp switches live, could you wire this kit to one of those spots. Replacing the factory switch with the new one?

@jonathankenton7182 9 ай бұрын

These are an absolute must have.

@jonathankenton7182 9 ай бұрын

The link is broken.

@Augustinaris 10 ай бұрын

I already have some spare fuel hose, so I will definitely be trying this out! Thanks!

@russ9897 9 ай бұрын

Glad to help

@brent685 Жыл бұрын

Any issues with door closing properly? Really having to slam it excessively hard

@russ9897 Жыл бұрын

It does seem that you have pull them pretty hard to shut properly. No issues so far though.

@TP42-sc6x Жыл бұрын

Will this work on a 520?

@astantonvmd Жыл бұрын

fuel hose wares out rapidly....need a material that can withstand the friction

@keithriley5015 Жыл бұрын

Honda has to do something about this issue mine has under 400km and same issue I tried adjusting several times. Thought I had it then took it off the jack and nope stuck in turf mode.

@t.j.limbaugh385 Жыл бұрын

Where is the ignition on wire under the hood??? I'm having trouble figuring out how to have my switches back lite... Thank you,

@russ9897 Жыл бұрын

There’s a harness you can buy from Hondasxs.com that ties into your 12v port for key on power. I ran mine to a terminal strip and then landed my backlighting there.

@t.j.limbaugh385 Жыл бұрын

@@russ9897 I was thinking about running a "Daisy chain" from my lighted light bar switch to three other switches I have... Not sure if that will work though??? What do you think???

@russ9897 Жыл бұрын

@@t.j.limbaugh385 yes that would work as well.

@mauromartinez9236 Жыл бұрын

Do I need wheel spacers if I am installing the shock spacer?

@russ9897 Жыл бұрын

I would add spacers anytime you lift a rig. If you go up you should go out.

@allenzyczynski2707 Жыл бұрын

All that heat shrimp and the rocker switch and connector aren't sealed 🙄

@scottburns5049 Жыл бұрын

I would call that 9 out 10 for fit and finish

@chadhastings218 Жыл бұрын

Do u get any rubbing on front wheel wells at full lock and compression

@russ9897 Жыл бұрын

Yes, but I didn’t install the steering stops that came with my superatv a-arms.

@keithriley5015 2 жыл бұрын

Mine is the same tried adjusting but still have same problems

@silvosshop 2 жыл бұрын

On my Honda pioneer I cannot shift 4wd to 2wd. Please give me some advice thanks!

@russ9897 2 жыл бұрын

First you need to confirm that it’s not shifting, put the unit on jack stands to make sure. It could be working but not showing up on the display.

@joegelencser2571 2 жыл бұрын

Why not just get longer cables so you don't have that big bracket sticking out??

@russ9897 2 жыл бұрын

They were readily available and longer cables weren’t on the market yet. The bracket doesn’t matter because the cables are attached to it anyway.

@bradyhaider3609 2 жыл бұрын

What are the dimensions of the light bar? Is this a 20”?

@danharris5873 2 жыл бұрын

Shouldn't have to do that on an expensive machine

@russ9897 2 жыл бұрын

I added it to help out when the radiator gets dirty. I went 6 days of solid riding this last trip before I washed the radiator out and it helped keep it cool enough until I could find some water.

@11stealthgraygmc 2 жыл бұрын

my 2022 Honda Pioneer 1000 has a hard plastic cover underneath the seat, removed it and the wire is right there in front of you, as in the video. Used a tiny flat head to depress the tab and the plug came out easily. Plugged in the override, zip tied it and done. This video is spot on, thanks so much! took longer to type this than to install the override plug.

@wilfredlemon4961 2 жыл бұрын

On my 2021 P-1000, in 4x4 low, with Diff Lock, under heavy load, it will pop out of Diff Lock, then 1 second later will SLAM back in. Not sure, but pause in motion seemed to indicate same problem in both front and rear Diff Lock. This happened 2x my last outing. I don't think it is a linkage proplem. What alse might it be?

@russ9897 2 жыл бұрын

It could be your low going out in the sub-transmission , does it do it in high?

@wilfredlemon4961 2 жыл бұрын

@@russ9897 That is an excellent suggestion and I now think that is the problem. Is that something that could be fixed with an adjustment? I don't know the answer to your question.

@russ9897 2 жыл бұрын

@@wilfredlemon4961 any disengagement in low that jumps in and out is typically that range going out in the sub-transmission. Unfortunately you will have to remove it and have it rebuilt.

@biggunaddict2931 2 жыл бұрын

Have you had any issues with your machine overheating before adding this ? I have a 2021 1000-5le and it’s been overheating a lot lately. I live in south Florida and been running it in sugar sand and some mud but nothing to hard for it to overheat that much . I wish I knew the actual temp on the machine rather than the crappy display symbol they give us with 4 symbols being the hottest then the red temp light turns on . I just ordered this fan override kit hopefully that solves my problem and also ordered the other radiator cap and thermostat with the water wetter to see if that helps. Just wondering if you had any similar issues or any ideas on what it could be thx

@russ9897 2 жыл бұрын

I never had any of those issues, I added it as extra insurance when I play in the mud. I’ve heard some guys having the ecu flashed and it taking care of that issue:

@redblue40rc33 2 жыл бұрын

5???? Wheres the other rear seats?.... It suppose to seat 5 ppl right????

@russ9897 2 жыл бұрын

They are in the bed, it turns into two extra seats.

@russkeagle3216 2 жыл бұрын

Very well done video, especially about pressing down on connector tab- thanks!

@russ9897 2 жыл бұрын

You’re welcome, I’m just trying to make it easier for the next guy.

@sallutz 2 жыл бұрын

Great video. I just bought a 1000 and am considering an aftermarket hardcabs kit but they are pricey.

@russ9897 2 жыл бұрын

Yes they are, I’d love to have a set but not for that much coin.

@tomfoolery5033 2 жыл бұрын

What wheels and tires? Sizes?

@russ9897 2 жыл бұрын

System 3 SB4 wheels 6+1 offset. 30x10x14 Super Grip K9s.

@larrye2749 2 жыл бұрын

how about a link to where you got this please.

@russ9897 2 жыл бұрын

www.wfosxs.com/

@davidbrett7613 2 жыл бұрын

You should have said what adjustments you made

@youdandee1 2 жыл бұрын

I’m installing Harnesses on my Pioneer 1000-5 but I’m leaving original seatbelts on machine this will work for sure thank you for posting this

@travisricks3436 2 жыл бұрын

Just ordered door cup holders for my 2016 Pioneer 1000 EPS.

@brettcobler 2 жыл бұрын

Where can I get them?

@russ9897 2 жыл бұрын

I got mine off EBay.

@byronanglin2316 3 жыл бұрын

I was wondering does it still ride the same or is it a little bit rougher

@russ9897 3 жыл бұрын

It firms it up a bit but still rides good.

@jessewoody5772 2 жыл бұрын

It will be stiffer because lifting in this manner is equivalent to a good six clicks or so on an adj. preload shock. Its good uz you stay within the intended travel of the cv joint, but you give up some droop and suppleness

@dueler100 3 жыл бұрын

Does anyone have a video on the front diff adjustment? Mine goes in and the light comes on but doesn't stay in under throttle. Was told theres a nut adjustment under a cover..

@dueler100 3 жыл бұрын

Front diff lock i mean.