Complimenti per il video, però potevi far vedere in maniera piu' dettagliata i colegamenti specie come hai inserito il filo verde sul clacson non si vede nulla, bastava una semplice ripresa dall'alto con una piccola torcia.

I purchased one of these recently for my 2023 F900XR. The mounting screws on either side of the GPS cradle that go through the holes in the moto-mate will not stay tight. At first, I thought it was simply a matter of needing a lockwasher. No luck, still gets loose and the mount falls into the LCD. I added locktite to the threads, still no luck. I swapped out for longer screws so there were more threads going into the threaded portion of the mount. With the moto-mate having a thicker section than the stock mount, this made sense. Still no luck. No matter what, the mount becomes loose and slips downward into the LCD screen. The only thing I can come up with is that the material is somewhat soft and continues to compress with each re-tightening of the screws. I can tighten the screws with the bike sitting in the garage, come out the next day and they will be loose again without the bike even moving. I'm at the point where I'm about to toss it in the trash and find another mount.

Great vid ,just what I was after

Good instructions. Looks a bit tight if you put on the new bmw connected ride gps. Can you confirm when this gps is fitted it will also allow screen height operation. I can confirm that the new ConnectedRide Navigator prevents screen adjustment as its about half inch too wide.

The pods outer lens is upside down….

Hi. Sorry if I’ve missed but how many EzCan are there? Thanks. Hakan.

Illegal. Ya welcome

can you share connection diagram for this configuration , thanks!

can you share the connection diagram?

Can it hold the Chigee Aio lite?!

Perfect! Except I’d lose that screw somehow!

Did you remove the fuel tank to run the harness from the lights to the cansmart or is there room to route it underneath?

Don't buy this piece of s**t..... I have bought it and quality is horrible. The holder broked after one euro trip. Somewhere in Romania l had to solve the navigation mount due to holder was broken. Save the money!

I ordered the D3 lights and sound bomb for my KTM 2022 1290R however the sound bomb does not fit in the frame gap as there is a hug knob for the preload adjustment for the rear shock... I can't find anywhere else to mount it... anyone want a sound bomb? Very frustrated!

I have the genuine touring screen, does it still work for that. The one in video is standard screen.

Guards

Where u get engine bars

Any discount offered on this product NV-1 T?

Did you have to use an extra shirt Y CABLE that come with the kit for use all the functions? Have you occupied three circuits or two in the cansmart?

Do you have a picture or video showing what the Zumo XT mounts look like without the GPS itself on there, but WITH the power cable? In this video, which doesn't show the power cable, it looks like the power cable would be sticking down from the back of the GPS and blocking a bit of the view of the TFT display.

Enviam para Portugal?

It’s def not excessive

Amigo esse suporte dá para telemóveis?

Nice place to mount but the moto mate is flawed. Numerous v100 owners myself included have had it split and break where it curves over the tft. The plastic is too thin. Needs to be made from metal. Mine lasted 100 miles and thats road riding with a galaxy s24 on it. I would avoid this product.

Does this mounting solution cause the SoundBomb's Compressor to be outside the maximum allowed lean angle? "The compressor should be mounted so that the cylinder is vertical with no more than a 25 degree variance from the vertical position." This is due to the lubricant inside the compressor that is held inside in part, due to gravity. If the lubricant is allowed to work it's way out of the compressor, eventually it will stop working. Be aware, if this is too far on its side, Denali would not replace this under warranty if it failed.

Good day, can I use it for my techmate carplay 5 inch device? Thank you, good work. Do you ship to Turkey?

👍👏👏👏👏

Good video and looks like a good product. Looking for a system to fit to my new HD Pan-A. However, the camera mounting brackets that are shown on the MM website aren't the same as the ones shown in this video. The mounts shown in the video look good - very similar to the INNOVV cameras on my 2nd bike. Can't say same the same about the mounts shown on the website. The mounts are going to be a dealbreaker. Which ones would I get if I ordered a X6 system today?

Hi Will this setup fit onto a KTM 390 Duke?

Thanks for the video. What is the maximum weight you recommend, for devices put onto the GPS Mount? Devices vary from roughly 340gr. (Garmin XT2) to max. 840gr. (Carpuride W702).

Got mine love it. Grate positioning. Looks awesome. And works brilliant👍🏻

Hi, can i use this for KTM 1290 sas 2019?

How do I win? ❤

Is there not a gps / navigation on that big color tft screen that is already on the bike so you do not have to add GPS units / phone for the bike ? Or did KTM cheap out and only put turn by turn on that HUGE KTM screen ? For an expensive bike like this that has almost everything , I think that KTM could at least add so that you can have google maps via your phone or something on that TFT screen that comes with the bike. They surely already have it so that you can sync your phone with that KTM TFT screen for calls and music so should not be that expensive / hard for them to add a google maps sync feature to that screen.

"2k" is called Full HD. it is has a 1920x1080 pixel resolution. In other words it is, in fact, 2k in the front, and 1080 in the rear - both of which are the same thing.

That looks like a very good bit of kit for the V100 but with the superb multi-Media package on the V100S model navigation information is sent to the bikes instrument panel via Bluetooth from your phone. I would see little use for such a device unless you are particularly wedded to your particular GPS unit.

Interesting piece of kit i remember you talking about a "New Product" when you were fitting the Global Eagle dash cams & rear licence plate lights a few weeks ago...By the way there all work fine.

7:18 good morning, like to know where to order that mount; I’m in Canada , just bought V100s. Looks to be a great mount

Does it vibrate?

Is there a subscription with any third parties or with the camera to have the gps or anything working?

Does it work for carpuride 5"????

I installed my Mount Yesterday, absolutely great!

Does moto-mate mount work with touratech crash bar extension?

Looks like a great product. Does it work on a 1290 R 2023 with the Garmin 700 series mount. The website doesn't note that it does.

This is the perfect solution to keep your eyes on the road and follow the navigation. the material is very sturdy. the support will be sent quickly. the only downside is that I was charged an additional 23.97 euros in import duties.

Fantastic product. I dremeled a small notch at the centre point where the mount meets the top of the TFT to allow the XT2 cable to pass through and then fed that through the centre cable channel. Totally hidden cable and looks like a factory install. May be worth including such a notch in future versions.

Would it be advisable to disconnect the battery when disconnecting the screen?.

for 1290 2020 model...???

Honda African Twin? I thought it was Japanese.

I'm from Singapore....I want to purchase it. Please advise how to get cause your country selection box my country is invalid.