Modern DJ Cases

Пікірлер

@djrobgons2010 2 күн бұрын

Can you just buy the base with the cast wheels?

@djrobgons2010 11 күн бұрын

This would be cool with a monitor, where the acrylic is (with a clear plexiglass)

@djsanctus1650 Ай бұрын

Are you still taking orders?

@djmotions9392 3 ай бұрын

How Much For A Rane Performer With Dual Mics

@waynecannady52 4 ай бұрын

💯💯💯💯

@simosimplice 5 ай бұрын

What about the colomn speaker? References please

@carlosjara4897 6 ай бұрын

Is this the ProX XZF-DJCTBL CASE Control Tower Podium Stand? Because I just bought my rane 4

@ajwillay6888 7 ай бұрын

How much is This case going to set somebody back? 🫣

@DJRUMMYMUSIC 7 ай бұрын

how much are you charging to make one of these i also have a rane 4

@richardedwards3976 10 ай бұрын

Hi, thanx for video. What type of power outlet or strip you use to power controller, laptop, mike etc, when they say the Rane Four requires a wall outlet?

@DJ_FLIGHT_850 Жыл бұрын

Nice case brother. Simple and great quality look.

@alvin3322 Жыл бұрын

Are these still available?

@dj_awsm Жыл бұрын

That laptop position scares me. Any way to secure the laptop in place? Magnets?

@ModernDJCases Жыл бұрын

Velcro

@ModernDJCases Жыл бұрын

But I’m not selling these anymore

@DjGCue71 Жыл бұрын

$1000.00 for the top only? wow! I payed the same for this: kzbin.info/www/bejne/Z2KrgYRtiMeFm7csi=WWjziP2i3VoWrFVQ

@djdannybhtx Жыл бұрын

Looks great! Can you share where you got these bags made at?

@dtweed76 Жыл бұрын

what's your contact info?

@djcar5181 Жыл бұрын

Looks nice.

@Blazelaserengraving Жыл бұрын

Is $949 the price for the entire setup?

@soundcentral Жыл бұрын

Super slick! The laptop positioning on any of these scares the heck out of me though.

@tepanganiban Жыл бұрын

looks good! do you offer pre wiring for a fee? what's the turnaround time once preorders are met? how many orders do you need to start production?

@tepanganiban Жыл бұрын

Also… The email in the description doesn’t seem to work

@NewVisionLCS Жыл бұрын

Classy setup!

@dan_alex Жыл бұрын

Do you ship to Australia?

@ModernDJCases Жыл бұрын

Would probably be way to expensive honestly

@kaviardachocolatebar5944 Жыл бұрын

i would like to know how much you selling the whole setup you are charging for your custom set up. I also have a QSC touchmix 16 and a rodecaster pro?

@ModernDJCases Жыл бұрын

the actual rack build is all custom and wouldnt sell it cuz its too much work. but i built the rack based on the size of the touchmix 8 haha so it fits perfect on a sliding shelf.

@deejpun Жыл бұрын

Nice where did you get the Custom bag?

@victorgallowz Жыл бұрын

hey how are you i was wondering do make this to fit turntables just asking I like the price or do you make it to fit both like a rane one just curious

@ModernDJCases Жыл бұрын

Rane one for sure. Turntables would need to be bigger so I wouldn’t recommend.

@victorgallowz Жыл бұрын

@Modern DJ Cases all good thanks

@djrobgons2010 Жыл бұрын

You should make a base with option to put monitor up front (for videos)

@FlyCasual1 Жыл бұрын

I can’t believe the top doesn’t latch to the bottom, that is a disaster waiting to happen. Looks very unstable… I mean good luck but I DDJ at jungle dances and they get rowdy!

@ModernDJCases Жыл бұрын

I do weddings and how can it be unstable? If this thing tipped over it would tip over as a whole thing. Even it was a latched together. If you do rowdy dances you should be using a dj booth made out of truss like they do at festivals. I been using this style system for 6 years now and haven’t had an issue lol and I used regular truss which is much smaller than my base.

@DjGCue71 Жыл бұрын

drunk guestr at a wedding comes over and leans on one of the ends and is over. did you make this?

@DjGCue71 Жыл бұрын

if it was latched together, at least you will have some time to catch the whole thing @@ModernDJCases

@ModernDJCases Жыл бұрын

6 months 60+ gigs later, not a single issue. not even close plus i had a similar setup before on a piece of truss, and thats 12/12. this is like putting something on a cocktail table, if htis gets knocked it doesnt matter if latched or not. @@DjGCue71

@DJTEDDY507 11 ай бұрын

@@ModernDJCasesthe fact that it haven’t happened doesn’t mean it won’t happen ever. That is wishful thinking

@alexsalcedo3507 Жыл бұрын

🔥

@scoopballin Жыл бұрын

$2000 for a little bit of wood and metal is wild

@ModernDJCases Жыл бұрын

$2000? It’s $949 And it’s not a little material, it adds up very quickly. And not to mention There’s professional tools used. A planer, a router, table saw, chop saw, lots of wood glue, and most importantly there is a lot of labor. But it’s not for everyone and I don’t even care much to sell them, I only made the availability because a bunch of people were interested and asked for one. Thanks 🙏

@salsa-yasicuba5928 2 ай бұрын

Yes ,that is crazy. I already bought the wood and I'm ready to do it myself.

@dennyd935 Жыл бұрын

The bag for controller is great

@stnation5895 Жыл бұрын

That is awesome. Can you do one for the ddj flx 10?

@ModernDJCases Жыл бұрын

Yes

@diskjokk Жыл бұрын

Man, that's really, really, cool!

@thestarvingdjs Жыл бұрын

Can I order the base all white Led and the transport kit by itself without the top case.

@ModernDJCases Жыл бұрын

just as a shell? and led as in you would want white acrylic so you could put an uplight in there?

@thestarvingdjs Жыл бұрын

@@ModernDJCases Yes sir I use a small controller sb3 and already have the top made. I need the bottom. Been using a totem but would like something that looks more official.

@ModernDJCases Жыл бұрын

@@thestarvingdjs can you give me the width and length of the top case ? And where are you located ?

@thestarvingdjs Жыл бұрын

@@ModernDJCases I'm located in Raleigh NC and Top is 40 wide 19 depth

@ModernDJCases Жыл бұрын

@@thestarvingdjs wow the top is bigger than mine haha mines at 36.5 but yes should be fine email me [email protected] and we can do a quote

@earlesters1249 Жыл бұрын

Do in fit the Rane one

@ModernDJCases Жыл бұрын

yes rane one is smaller than rane four.

@DeeJay_IMB Жыл бұрын

Are you planning to make one for the range 12, pioneer S11 combo?

@djraymondraymond1419 Жыл бұрын

Nice case . I have a question what are the speakers in your thumb nail. 😊

@ModernDJCases Жыл бұрын

maui 44 g2! amazing for smaller to mid sized events

@Nosh_Feratu Жыл бұрын

thats really well conceived, excellent job man!!

@TheDjelements Жыл бұрын

White edging available ?

@ModernDJCases Жыл бұрын

currently no, black or silver.

@wes_wunder Жыл бұрын

Love this build. Not too sensible to ship across the country though, would you be interested in selling the plans? That way I could mod for my uses and save the shipping cost