taj problem i ja imam sad ne prim gas

this is a seat sensor issue. open your seat at the front near the hinge your see a cable check if the cable is not broken if this is in tact then got to your front left wheel your see a black connecter connected to the front left wheel check the cable if its not connected this is your issue.

this problem can be easily solved. 1 - put on the back footboard. 2- after turning on the moped and the sound signal starts, press the lock button to the right. the sound will stop. Move the button to the right to the left several times, if after that the siren will turn on - check the fluid level in the hydrolock drive or completely replace it. If replacement and pumping does not help, check and replace the blockage fluid pressure sensor.

Sicherung

?

Mine did that when hydralic fluid bottle was empty. Topped it up and it didn't do it again.

Problem battery .. I heve piaggio mp3 400 same problem I heve before ... 100% battery

rollock- ecu- sensors wheel- seatsensor- fluid- wtf a lot of things to check and this is not all.. aaah!🧐

i am having the same issue. i will try and see the solutions bellow

Hello. How have you solved it?

seat sensor

Top up the hydraulic fluid behind the headlights. Remove grill and lights to get access. Warning sound for that. Not a part of the computer system. 😜😁

Un suscriptor más saludos

Druze kako si resio ovaj problem imam isti sta je bio problem hvala

*Por si os sirve de ayuda tenéis un canal de mantenimiento de las Piaggio Mp3* kzbin.info/door/NlkIlFm5HAZJ-0gyL0qjBAvideos

I had the same problem and it turned up thay it was from the lock and unlock there was leaking air and the brake oil was empty leaking

Just fixed mine, same exact error. 1) Put bike up on center stand. 2) Mount seat with your full body weight to trigger sensor. 3) Double push the tilt-lock switch toward the unlock position. 4) You can now lock and unlock the tilt and the motor will now rev-up the motor normally as well.

Sensor for sit

Buonasera il mio scooter fa lo stesso difetto cosa potrebbe essere successo ? Grazie per chi mi risponde

ecu computer problem, my was replaced and no more problem.

Check the mirror, mine did the same thing. Replaced mirror and problem fixed.

Привет как решили ету проблему??

Good possibility it might be the seat sensor

that's the ECU computer system, replace the the unit and problem is solved !

I have a fault with mine on the 125 version u can start the bike up fine and it rides fine but when u turn the ignition off and take the key out the start or motor keeps on turning then u have to disconnect the battery for it to stop any ideas be great thanks

Rolock defect

Check the fluid of roll lock

OK so this is the solution. Happend twice. After summer storing. First get the spare programing key. Do the reset on the owners manual. Then insert the remote key orange one. Then it will go.

Датчики в рулевой подвеске смотри

Just had this same issue. Battery was low on voltage after winter storage. Charged it up and problem went away.

I co tp kolego było w tym skutetze

please i have the same problem.you can help me settled

Is a sensor on the wheel, i have the same problem and easy to fix, check on each wheel is a sensor, one of them should be disconnected, normally the wire crack after long years of normal use, good lock!

Seat sensor is faulty.

Check the seat sensor. My piaggio did the same thing with the seat removed. Put the seat back on it works fine now.

how to solve the problem?

как решил проблему?

kzbin.info/www/bejne/nHmUp6tqaayKnpY

i had the same problem. Inspect the fuses and the voltage regulator.

the battery is empty. recharge it and it will be ok. i had the same problem with mp3 400 lt

to dela cidlo pod sedackou