Thanks Great video

I got duped on mecari when cordless senior was fairly new. It was actually the wahl 1919 . As far as the dupe i received i could tell was by motor. Because when you switch it off the motor didn't stop running right away. I had the magic clip at the same time so i could tell the seinor i got was fake. I disputed it on mecari and they sided with my case.

Same shit happens with me 😔

Just buy them from the Wahl site or a certified dealer and you don’t have to worry about it. If you see a name brand for half the price from a seller you don’t know then it may be fake.

Thanks for this video. I was just thinking about buying a couple of these cordless WAHL Seniors and now I'm kind wondering if I want to get them. I found a supply place in Florida that has three physical walk-in stores. They have one in St. Petersburg and two in Tampa. Their regular price shows $179.99 and they have them marked down to $109.99. They show the SKU is 8504 but it doesn't have a dash or any other numbers after that. The box they show that the clipper is in does have a red line under where it says ZERO - OVERLAP BLADES in the top right hand corner. On WAHL's website it shows the SKU as 08504-400. I'm hesitant to buy them after watching your video. I'm going to call WAHL and ask them if this supply house is a certified seller of their products.

2002 corolla! Did it in about 40 mins, thanks for the straight to the point explanation

Thank You

This is one of the best maintenance/repair videos on KZbin. Thank you for this! Don’t even need to jack up the car 🤯 my GS400 starter was definitely not this easy 😭

Coool...Amen.

definitely worked on my neighbors 2008 Corolla... i just made myself, a hundred and fifty bucksssss.... thanks bro

Beacon you sumovabich, amazing tutorial for this. Bought this back in 2016 with plans to use for car audio install but didn't use it until now lol. Low and behold, major use for it was going to be for heat shrink but this thing was just full blasting until now. Thanks again!

You said it is done in 15 minutes. Please be realistic.

First try and it worked thank you so much

Thanks for your suggestion and information 👍 you made it very easy for us backyard mechanics.😊

I had to take out my sub woofer to get to that section. I still could not access that area to make an adjustment. Who designed these Elements.

Why even bother taking the radiator shroud off the starter will slip right out of the bottom of the car without removing anything it's literally a 10-minute job

Best close-ups on how to disconnect clips! Auto Repair version of Project Farm. 🙏🔥🔧

Thank you for this. Straight to the point. Fixed my nephew's car in 25 min total time. Perfect instructions.

2005

Nice and easy thank you ❤

Just removed a 2006 Sonata 3.3. Went ok, but hardest part is twisting and turning the starter to find the sweet spot where it comes out. I did remove the motor mount horizontal bolt/nut for that extra 1/4" clearance.

1998 -2002 is a plug & play install. 1998 & older needs the Modification

Thank you for the video. It was very helpful. 🤙

Clear, concise, to the point instructions. Better than all my teachers I had in my school days. Thanks so much.

Excellent video sir

Excellent video straight to the point removing just enough parts to get the job done while others like to be taking half the engine off unnecessarily.

You don't have to remove the fan, although I'm sure extra space makes it less awkward. It's sufficient to disconnect the fan connector, it's in the way when you're wiggling the starter out. Corolla '05.

2012 Toyota Corolla starter location

You just saved my life. JUST did this on a 2007 for my Mom on the side of the road. Worked perfect! Thank you so much.

There were two bolts in each spot and I couldn’t tell which one was the starter so I took out all 4. Now I feel like I’m putting them in wrong. There are two long ones and one medium and one short, any ideas on where each one goes lol

Thanks took me around 30 mins easy R&R

Well explained . thanks. Could you tell me with I lose the radio when the battery is off.

2005 Corolla, manual trans. Watched another video. Guy pissed and moaned about the right-side bolt, and the angle he shot the video at seemed to support that. BRIGHT LIGHT IS YOUR FRIEND. When got a look at that bolt, it seemed further out than it looked on his video. In and out, exactly this same way, in 30 minutes, with cleaning the bolt threads w/ WD40 washing my hands. Wish I'd seen this first. Great video, thank you.

Saw someone say you need lift the car and get it from under😂 this is way easier.

I cant get my button to release to move it into reverse any way to trick it into releasing ?

Thanks for the simple explanation, it worked fine on my 03. 😂I irdered the brushes on-line for 14$, openned it up, replaced them, and good as new. 👍🏼🙌🏼

Exactly as described for a 2003 Corolla LE. Great vid.. Thnx

Replaced my starter. Thank you

everything was perfect. except the bolt behind the dipstick, I have been trying for 20 min to get that damn thing off lol still going, resorting to taking the stuff above it off to reach it. I think its just on there too good, and I cant get the leverage.

Good video and straight to the point

Too much going on just for a radiator lol

Thanks for the video. Helped me change out the starter on my step daughter's 03 Corolla and only cost me $153 for the starter instead of the $500 the mechanic wanted!

Thanks, (2006 sonata LX 3.3) replaced my starter with a new one without issue. I noticed many comments saying the starter was hard to fit with the shield. It wasn’t bad. I just had to angle it just right - gear end up and pull out at an upward angle. Install in the same fashion. It went very smooth. No need to cut or install without the shield guys!

Tip. Get a benzomatic. Best ive had

I turned around for a sec after I pulled the starter, and it fkn fell right in to my radiator and poked a hole. I'm so pissed. LOL

Chrysler engineers are hurting the brand. Their cars and trucks are difficult to work on anymore. Been a chrysler buyer for 30 years. Ready to just buy older cars and trucks and be done with it.

It's amazing how many people buy those shitty batteries

Thanks for the tutorial. I was finding it impossible to get the new one back in. I took off the heat shield and the starter was pretty easy to work in, but the I couldn't slide in the heat shield to install it. So... I took a grinder and cut off a small triangle from the side of it by the screw on the back. This was just enough for me to slide the heat shield up from below and install the nuts and bolts to protect the starter and wires.

Well I tried this hack or repair and it did not fix the problem ,however if unscrew the plastic shell nut and lift this assembly off .The torch lites fast but as I lower this assembly back down it snuffs out the flame.

Worked perfectly for me on a 2007 4dr. Knowing it was super easy to move the fan and make room for a fumble fingers like me, made it much easier. I'm a slow poke working on cars, and took my time to make sure I didn't damage the electrical connector etc, I was still able to do it myself despite. Thanks for the clear, concise instructions.