title should be 'how to destroy an alesis pedal' Far easier to take the pedal off your hi-hat stand and attach your alesis pedal to the rod via the alesis height adjuster screw and some 90 angle

The switch isn't the problem, the cam in the locking mechanism tends to ware and prevents micro switch from being fully depressed. The locking mechanism is $1000 from VW but a quick spot weld and to prevent the lock hook from pivoting on the cam will fix the issue.

It’s me trap for gtag

kzbin.info/www/bejne/nIfCZZWhi8aNjrs. Liked my Alexis notro till hi hat stopped working. Got another pedal. Still nothing. Wondering if it’s the wire. Any thoughts. kzbin.info/www/bejne/nIfCZZWhi8aNjrs

This piece is located along the top edge above the windshield on the passenger side. It's where the top locks in.

Just lookup the entire diagram for the year you have and find it, its not this man's job to fix your problem hes helping find a solution

man it would have been nice to see where the hell this is. I took the pillar off the passenger side and there is nothing there. I am getting mighty frustrated

A video on how you get the switch out would be really helpful

can you show me pictures of your hihat pedal 6.5 jack? is it mono or stereo??

can you please tell me the value of the resistor in order please its not clear in the video

Where is this part located? Under the wiper guards? [email protected] your support with this would be amazing. I cant get a roadworthy with out shutting the sound off. TIA

That was a complete waste of time watching that.

Can you show how to remove that part?

Hurry I’m about to go to the junkyard. How do I take it apart?

I wish I could see how he takes this apart

Thank u. My peddal went off so i had to fix it now ik how!Thank u so much

Why over-engineer it like that? I think you can put the Alesis e-pedal (or any other electronic pedal) just NEXT to the real hi hat pedal and connect two with a sturdy plate, so when you work the real hi hat the electronic one goes up and down with it. Will that not be an easier solution requiring just a small metal (plywood?) plate and several screws? You can de-couple two pedals at any time for upgrades, fixes, etc.

Hi Stan! Let's play together soon :)

Perfect!

how much do you sell it? I'm from the Philippines

Very helpful! Does the conversion also work for the bass drum?

Sounds good.. You got a real good band my friend. Enjoy the FUN..

Email address is [email protected]

hmm i did a kinda similar process in which i flip the foams and put the white one on top but the sensitivy is soo low,so if i try this how good is the sensitivy? wouldnt have to crank my sensitivity settings up?

i.m thinking to use an magnetopot resistor to improve my hi hat.....i hope that i.ll work...

Very interesting but I have few questions since I’m thinking about to do with my Roland td-3 hi-hat controller (approximately the same construction as the alesis): 1) Did you also mount your Alesisi Hihat pad on the Hihat stand ? Do you play it in this manner? ( approximately like a Roland VH-11) 2) Did the transformation modify the overall sensitivity of the controller ? Is it now better, worse or the same as the one of the original Alesis controller before modification ? 3) Do you have a video showing the result (playing the hihat !)?

Very interesting but I have few questions since I’m thinking about to do with my Roland td-3 hi-hat controller (approximately the same construction as the alesis): 1) Did you also mount your Alesisi Hihat pad on the Hihat stand ? Do you play it in this manner? ( approximately like a Roland VH-11) 2) Did the transformation modify the overall sensitivity of the controller ? Is it now better, worse or the same as the one of the original Alesis controller before modification ? 3) Do you have a video showing the result (playing the hihat !)?

It's cool that you don't have to drill holes to attache the trigger!

No but if some way I can get you and email or you can send me one I could discuss this , I have made them before but I have no Yamaha modules anymore to test them . I would send you a drawing how to make your own if some way I can reach you . They will not let me send an email either but robisonsb at sbc global dot net .Put it together.

Hi. Will your hi hat controller work with a Yamaha DTxpress III module?

Well, I'm supposed to come to the office. Let me talk to Shawn about it. I would like to do it early and come on down to the lot, afterwards. I'll get back with you.

Do you want to come over an sit in at the farmer market tomorrow morning. Early from 8-12 , I am bringing some drums to play.

Do you want to come over an sit in at the farmer market tomorrow morning. Early from 8-12 , I am bringing some drums toplay.

As I watch this video over and over, I get teary-eyed a little because I know how precious moments like this are. I know that you folks love watching your grand kids growing up. I'm the same way. Landon is serious about those drums!

I have a sit I have used for 20 years and they work great. I do not make them any more , I gave my business to Paul at [email protected] for the videos there are thousand of people using them on KZbin but below is one you can get intouch with and ask him and watch his videos . He is old and just does it for fun but he has used my triggers sense 2002 I think MrFasthands65 look him up on KZbin. Stan and buy the triggers from Paul at [email protected] .

They work great and you can see the guy above and ask him , I have been selling these for 20 years and I have people that have had them in there drums for 20 years and they still work great. I do not make them any more , to old so I gave my business to a young guy that makes them at [email protected] . For the Video can look up [email protected] Mobile: (561) 740-1591 on KZbin or call him and ask him about the triggers and I am sure he has some videos or levester white .

how do the trigger hold up any problems ?do you got any videos

because we know how to properly trigger drums WITHOUT such hassle... LOL n22b

where can i buy these triggers

Works great , very easy to do. Stan.

how does this work with the 12" heads?

Jeff Bridges character from The Vanishing is talking....

I know you're really ok your grandson and his great drumming. What a great moment for you to cherish for the rest of your lives. He is a sweet kid, so cute and sincere with his drumming. And his grandpa is the best drummer I ever met!

Hi I sell the controller , you can email me at robisonsb at sbc global dot net I use a Cy8

He is going to be a great drummer .

You will love this this way . the feel is great and I would not play them with the way they came because of the noise and feel .

I bought them from China try this guy , he bought my business and he might sell you some. [email protected]

If you can do that send me a video how you did it. Thanks.

This is a neat idea but why don't you just use the base of the pedal itself?! I mean, remove the board, but maintain the rubber there, as well as for the Circuit. Then slide that underneath the Hi-Hat stand. No nead to tear the jack out and no nead to glue stuf. Just use the materials provided by the pedal itself to make it work.

but the sarcasm is off the charts!!! lol