Thanks

Until they fix the topological naming issue that blows your model apart when doing something like deleting a chamfer FreeCAD is pretty much useless for serious work. Why they keep adding new features while the basics are totally broken baffles me.

sketch up is NOT a cad program, and never will be.

Thanks Mate

Amazing sir

Do you know how to make measurements appear? I'm having issues on trying to make my sketches a certain size. Thank you :)

Thanks. I'm learning FreeCAD right now (spent about 10 to 15 hours trying various things) and I sort of wonder if I can use binders to basically share sketches between objects. For example I have box base and lid and I want to create some ports/holes through both parts. So far I tried drawing box as a single object with split, but it's super confusing - it sort of breaks both parts and I may want to edit some features on one half and some features on both (maybe I want subtract venting slots). In the end I came to conclusion that it's likely easier - and also necessity for making snap-on edges - to make two separate solids and share some drawings, but at the same time I need to transform them (rotate, translate, mirror).

This problem no longer exists in the development version that will soon be released as version 1.0. Ther have also been many new features added.

Such problems are not visible in modern software.

This is the worst CAD program you will find on the planet.......mind you... i managed to cut a square into a squre these days after joining one line to another to create the sketch yet.....the lines still were not joined.....great huh.....who the hell puts rubbish like freecad out there. Solid works i reckon, to piss us all off

you havent really explained this very well at all.....i wish you guys would be more practicle instead of blah blah as you go along. Please plane the tutorial.

Onnnnnnnnnnnnnnnnnnnnnnnnnnnnn OOOOOnnnnnnnnnnnnnnnnnnnnnn

No commentary.

why do you people talk about everything else otyher than the subject we want to learn?????what a pain in the ass you all are

thanks man, you saved me from a lot of frustration.

"click on here"....

When I reclick on sketcher after getting out of it like you did I don’t get that menu section under task. It’s just blank

Great video, thanks! One question, which size should be the allen screwdriver for tightened the shaft?

Nice one.. thanks

it helps me alot :-)

it's still not working for me, All my points and vertices have a constraint and they're all locked and yet I'm getting the error that a wire isn't closed

Thank you, your video has elevated my frustration, very informative and helpful

very nice sharing

just like new!

Good evening, Hotwire. it is surprisingly distinctive video. thanks. :)

I found this hard to follow since I don't use TX companion. You can program this function on the Inputs screen of your radio using the switch as the input and providing a different curve for each. And then adding the inputs to the mixer section to control the desired channels. With a 3 position switch you could control 3 channels or get two functions on one channel and one function on the other.

too bad the motor shafts aren't avaliable to buy anymore. thanks COVID-19

Nice man. Subbed you, started our new surf brand channel, check it out cheers🤙🤙

Is it possible to log global variables to the SD card with the telemetry data?

Look very low

That worked out well getting close to the hang gliders, can you see the video back realtime or do you have to download later ?

So does this mean that If I use this on an elevator channel I could use it to trim elevator subtrim in flight?

Beautiful nature shots 👍

gonna do my head in that music lol

Kind of did that wrong on the last couple curves, lol. That would be a tough flyerwith such an aileron curve

Suggest losing the music and putting on a soundtrack.

+1👍 old but thanks!!! helped me.

I wrecked my qx 550 and the outer part of the motor is bent. Is it possible to hammer it back out or do I have to buy another from horizon hobby?

You have quite old hands. But they know how to make sh*t. Nice

Hey, could you help me? I have a battery that has weak C (no idea what real C is but it's well under 25c for 2200mah lipo for a phantom sized copter) and no telemetry at the moment. RTL is set to 10.7volts on 3s. It messes with my flight big time when there are spikes/brown outs. RTL I don't mind because it's relatively safe but when the batt is low in any other mode copter tires to land. The thing is in GPS mode the return is too sluggish (even manual) and autoland function on my copter should be called autocrash since I don't have a rangefiner of any sort and it doesn't seem to detect landings propertly. I did a test and copter fails to maintain hover at 9,5volts. Can I in any way separate the two functions? RTL and Land (I would like it to not try to land -ever) when there's low battery? I would like to leave RTL as is until I set up telemetry but turn off land. Is that possible? When I tried to find it it seems to be connected. I would appreciate if you helped me. Also: how low should I set up low voltage in that case? Thanks in advance

Where do you purchase the shafts?

Hello a question, Why is it necessary to set the curves? and what is the recommended for a Tiny whood blade inductrix? Sorry, but I'm new to this, thks..

Good morning, buddy. You could help me in the setup of the acceleration curve and pithc! I use a radio Taranis x9d Plus with the 935 mm helicopter. I live in Brazil and I'm trying very hard. Thank you so much.

Where should I get epp?

Great video, enormously helpful. Thanks!

Thanks! I will test this!

Hi, I have a FS TH9X and a DIY drone F450 usim a APM controler... I need write a FirmWare and EEPROM using a Usbasp. Where I find this Companion version for MAC? Thanks a lot!

lol i cant hear you

I did this with my flaps on my Scale C-130 instead of using a servo reversing Y connector i put each servo on its own channels 8 and 9 and then used my dial to control both of them.