Пікірлер
@Raptor4fx 2 күн бұрын
Any seats that don’t sit that high? Hate that look
@dylanaguiluz6246 3 күн бұрын
Soooo. I want to swap 14-20 seats into my 07 Tahoe but the woman I’m seeing doesn’t want me to swap to a center console. Would I be able to use the 14-20 jump seat?
@toranowatson7551 12 күн бұрын
I want the Gen 4 seats in my 99 GMC suburban. Is there a way I can get the second row mounted with the front seats also as captains chairs
@chefboiali 22 күн бұрын
Came here to watch you knock out those rivets and learned how to wire up my 5th Gen Camaro SS seats into My 67 Camaro! Thanks much!
@user-br6qs9fy7x 24 күн бұрын
Would love a kit for my 88 Burb, I still have the neck breaker Captn buckets in mine
@stephenroland8225 24 күн бұрын
Ive got a 2012 Silverado 2500 , trying to swap 2016 Denali 2500 seats into it !! What kind of brackets you recommend or do you have those?
@voncash7631 24 күн бұрын
Dose the front seats bolt right in?
@cotywagnon 28 күн бұрын
Yes! Can’t wait to get started on my interior. Gonna get some of these brackets for sure! Thank you!
@califass213g3 Ай бұрын
I just bought these seats and will be buying your brackets soon! Do y’all sell harness connections or have a link to someone that does for drivers electric seat?
@CristoferGarcia-gs2bc Ай бұрын
When are you doing that bracket
@brandenroyea3432 Ай бұрын
Will these work on yukon/tahoe hybrid seats?
@OBSOutpost Ай бұрын
No
@briangrupe9599 Ай бұрын
Can you do a video on all 4 bucket swap for the OBS crew cab? And do you make rear brackets for this swap? I'm looking for all 4 to be the 05 seats...
@juicewithgeorgefinch2796 Ай бұрын
Do you use your old seat belt lock on the seat or do you use your old one bec mine dont lock in ?
@OBSOutpost Ай бұрын
OBS seat belt to the new seat buckle. 2007-2013 seats used 2 different style buckles. one type works perfect the other you have to hold button down when putting in clip.
@CBTX94 Ай бұрын
Should do a video about the power seat operation. I have a Tahoe with power driver manual passenger and am curious how new powered seats would work.
@E.roy300 Ай бұрын
all 2014-21 seats fit a 1997 GMC sierra C1500 Extended Cab?
@OBSOutpost Ай бұрын
they use different brackets but yes they will all adapt
@E.roy300 28 күн бұрын
@@OBSOutpost which brackets would be those if you dont mind me asking?
@DirtyMax_OBS Ай бұрын
You should make or partner with someone to make a wiring harness to use the additions on the gen 5 with the obs. Overall really great products and video explanations!
@OBSOutpost Ай бұрын
its only 2 to 3 wires depending on which seat. Not really worth making a harness for 2-3 wires.
@constantinoestrada4124 Ай бұрын
Well it work for the 2020?
@Nomad397 Ай бұрын
Airbags work ?
@kirksnyder6190 2 ай бұрын
The brackets you used, will they work on a 94 GMC extended cab?
@OBSOutpost Ай бұрын
100% yes
@JayeRock 2 ай бұрын
I wish you did stuff like this for 99-06 with seatbelt relocation included.
@jancarlogarcia9227 2 ай бұрын
Is it work to say
@OBSOutpost Ай бұрын
fronts will work on 4 door. I make brackets to add rear captains seats as well.
@jancarlogarcia9227 2 ай бұрын
I have a 1999 tahoe 4 door
@noelcruz7800 2 ай бұрын
can you use original obs center console with this?
@OBSOutpost Ай бұрын
Yes
@mikeydejon2148 2 ай бұрын
Do stock seat belts work
@OBSOutpost 2 ай бұрын
Yes
@black_betty_the_94vetty 2 ай бұрын
So I have a 96 yukon 4dr. and I found a set of gmt800 leather seats to swap into it. I got the fronts in, however my question is for the rear seat brackets. Do you guys produce any adapting brackets to fit the GMT800 rears to the GMT400 rear in the 4 door application?? I see on the site that you guys have them for single, ext, crew cabs and TWO door tahoes and yukons, But I need some for the FOUR door! Thanks
@showtime302 2 ай бұрын
Gotta find one with captains chairs
@warriorplutotrent3827 2 ай бұрын
Next do a video on how we can do factory push button start. 😁😁
@warriorplutotrent3827 2 ай бұрын
The newer airbags work in nnbs?
@amatureskater15 2 ай бұрын
okay.... but WHY would you want new seats VS good condition cloth powered seats??? The old seats are 10x more comfortable
@OBSOutpost 2 ай бұрын
Would you sleep on a 30 year old bed? Newer seats are designed with ergonomics in mind to reduce back fatigue and better posture. Some of the newer trucks these seats come from cost $100k and I doubt any owners would pay that amount with old seat technology. Regardless of the condition, original OBS 30yr old broke down foam may seem cushy or comfortable until you actually ride in a new seat on a long road trip. Also from a hygienic standpoint, old seats are a bacteria breading ground.
@amatureskater15 2 ай бұрын
@@OBSOutpost odd.... everyone who uses the "butt test" still thinks these OBS seats are more comfortable yes, newer seats are sportier and made with new tech. But new isn't always better i love the product... just can't believe someone ripped out good cloth seats. Probably the most sought after used part for a OBS truck
@amatureskater15 2 ай бұрын
@@OBSOutpost new foam is widely available and steam cleaning does wonders. have a good day
@thelastsamurai1369 2 ай бұрын
For single cab guys I just installed the jump seat and the nut plates aren’t sitting flush on the bottom ended up getting nuts, lock washers, and flat washers. Just a heads up on what i experienced.
@litterboxent3602 2 ай бұрын
Do you still still sell the brackets?
@OBSOutpost 2 ай бұрын
yes, obsoutpost.com/obs-store/ols/products/gen-4-rear-2-door-seat-bracket-2015-2020-3rd-row-suv-to-1988-99-gm-2-door-suv
@jordan20091 2 ай бұрын
Im 14 and i got my first truck from a friend of my dads for free it doesnt run or anything but my dad said we would get it fixed and all i have to worry about is the inside. The inside of the truck smells terrible so i want to replace the seats to get rid of some smell and to make it look better im wondering if this set would work in a 1998 chevy s10
@mvanluven78 2 ай бұрын
So with the electric wiring as you have it here is just to get seat moving? My seat belt dummy light will be constantly on?
@OBSOutpost 2 ай бұрын
you can connect the new seat buckle wire to the floor harness. Simple ,it just a loop or connect the 2 wires together to turn light off
@ricardoacosta977 2 ай бұрын
What do you do for the back hooks to hold it up
@OBSOutpost 2 ай бұрын
you dont really need to do anything, it takes some force to move forward. Some guys use velcro just so it does not move under hard braking.
@ricardofernandez6542 2 ай бұрын
Hi can you tell me if you know I have a 1997 Tahoe that I am going from a 60/40 seat to bucket’s that I got from a downer Tahoe so the iner track has no floor studs . So do I have to drill holes on the floor? Thanks 🙏
@OBSOutpost 2 ай бұрын
yes
@richardparker294 2 ай бұрын
Ðo you sell or would you sell the nut plates by themselves?
@OBSOutpost 2 ай бұрын
yes, they are on the website. Just specify on the note section if you want 10mm or 3/8" when you order obsoutpost.com/obs-store/ols/products/nut-plate
@gordonstroup882 2 ай бұрын
What about making something for the squarebody from 73 up to 87? 🤔?
@OBSOutpost 2 ай бұрын
It is in the works
@gordonstroup882 2 ай бұрын
@OBSOutpost , "SAA-WEEEET!" Now that's what I'm talking about! Cool, very cool.✌️😎👍Thank you!
@ricardocornejo9426 2 ай бұрын
🔥
@AngryDogPerformance 2 ай бұрын
Just did an install with these brackets. I installed new carpet at the same time, the carpet was plush with mass backing and jute. I added another layer of jute beneath. My truck also has rear floor vents. Fitment of the brackets were off by a bit, but not insurmountable. 1) my thick carpet caused a problem with starting the front bolt on the passenger side inner bracket. This was solved with a longer bolt to start it and then replacing it once both front and rear bolts were sunk. 2) on the same passenger side inner bracket, seemingly unrelated to the carpet thickness, the rear gusset on the bracket interferes with the floor vent cover. This was solved by removing the cover and leaving the vent open. I am sightless disappointed that I didn’t realize this earlier because the carpet hole could have been cut tighter around the vent. These are my install tips.
@AngryDogPerformance 2 ай бұрын
Also a tip on drilling the rivets, use an impact drill. About 4-5 min with a regular drill. About 30 seconds with an impact drill.
@OBSOutpost 2 ай бұрын
I appreciate the feedback. I do disclose in the ad: Please note that brackets may interfere with the floor heat vent duct on trucks & SUVs equipped with this and may need to be modified with a heat gun to allow clearance.The GEN 3 are 15.5" wide compared to the factory seat frame at 13.5". Typically keeping the floor duct with some mods is not an issue with GEN 3 unless there is a lot of carpet padding then that needs to be removed to allow clearance. I go over the duct deeper on the GEN 5 video which is a problem because the GEN 5 are 17.5" wide and the duct needs to be cut or removed. .
@AngryDogPerformance 2 ай бұрын
@@OBSOutpost Thanks for the reply. I think the product is fantastic. Just giving my tips for the installer who might be reading replys! By the way, do you have any 2nd row swap solutions for suburban?
@OBSOutpost 2 ай бұрын
@@AngryDogPerformance No brackets needed for the 2nd row on Suburban. You will need to get a piece of tubing for the rear to make it level and then just drill new holes once you get the seats squared up. This is for 2007-13 2nd row captains 2015-2020 are flat and dont need any rear riser. I have not tried doing a bench but it should mount he same way
@brandoncoe956 2 ай бұрын
Yeeesssss!! These look great!! On the hunt for a set of Gen 5s at a decent price now!!
@AngryDogPerformance 3 ай бұрын
Is there a 2nd row seat that works with 88-99 suburban?
@OBSOutpost 3 ай бұрын
2015-2020 fit just need to drill new holes to mount
@nectorlopez1132 3 ай бұрын
Hi can you do this in other cars?
@OBSOutpost 3 ай бұрын
what car do you have?
@ernestmitchell8902 3 ай бұрын
Will those work on a 86 c-10
@OBSOutpost 3 ай бұрын
@@ernestmitchell8902 Not these brackets but I have C10 bracket in the works. check back in a month
@OBSOutpost 3 ай бұрын
@@ernestmitchell8902 Not these but I have C10 bracket in the works. Check back in a month
@traviswilde2691 3 ай бұрын
Great stuff, sir. Adding to my wish list.
@OBSOutpost 3 ай бұрын
Thank you.
@C2500_Chevy 3 ай бұрын
Absolutely amazing work man, definitely be picking up a set
@gering46 3 ай бұрын
Dan I have power, what color wires do I need to power the seat? I don’t want to F around and find out the hard way by blowing the air bags in the seat
@OBSOutpost 3 ай бұрын
email me and I can send a diagram [email protected]
@desigualteam5668 3 ай бұрын
I love these brackets Brother Good job ‼️‼️‼️
@OBSOutpost 3 ай бұрын
Appreciate it!
@hakeemrussell6106 3 ай бұрын
What rear seat would I use in my 4 door suv swap?
@OBSOutpost 3 ай бұрын
2nd row from SUV
@hakeemrussell6106 3 ай бұрын
What rear seat would I use in my 4 door swap?
@nkdm157 3 ай бұрын
Congratulations, i’m eager to swap modern seats in my 2-door Tahoe 💪
@OBSOutpost 3 ай бұрын
Best option is 2015-2020 seats 1st and 3rd row. here is the video on the rear seat for 2 Dr Tahoes kzbin.info/www/bejne/o3PaaoOQfLqbgNE and front seats kzbin.info/www/bejne/mIW9oKOQqbt-gbc
@Ace-44 3 ай бұрын
I just bought a 2000 z71 Tahoe. Its a 2000 but a gmt400 with the 5.7 and square body. Would 99-00 gmt800 seats bolt right up because its the same year or would i still have to modify it with the brackets because of the different body style? Really glad I found this channel! Luv the Tahoe but not a huge fan of the seats. Also what Gen do you recommend for someone that likes to sit/feel kinda lower? The OBS seats make me feel like I'm sitting to high.
@Blitz0065 3 ай бұрын
What's the issue on the Gen 5 rears for an OBS crew cab? I have a vision for a new project haha
@OBSOutpost 3 ай бұрын
video coming next
@Blitz0065 3 ай бұрын
@@OBSOutpost I'm crossing my fingers.
@OBSOutpost 3 ай бұрын
The new rear seat video will be on how to add buckets and 2014-2018 DBL cab rear seat swap. The 2019+ rear seats wont work in OBS truck without a full custom fabrication. There is no frame work on the back cushion, so to install the back seat would require welded in supports. You can check with local shops in your area but it is a big job to recreate all the mounting points especially the ones that the head rest will lock into and wont be cheap. I had one customer cut the back wall off a 2020 crew cab and weld it on in 97 EXT Cab truck, that was probably a more efficient way to mount the seat than to fabricate everything by hand. Ill be showing some of this in the video and go over why the 2019+ rear wont work.