HEADACHE SOUND

Пікірлер

@Manjarow Ай бұрын

Android?

@FlavioSantosdeAndrade Ай бұрын

The reloop spin should have that feature of loading digital songs, not only depends on 7" vinyl.

@djolegg 3 ай бұрын

2 features that would be awesome : - Double fader cut : possibility to cut the sound with both fader at the same time. - Max gain volume of the vinyl : Aux volume is very low compare to the vinyl output. It would be great to adjust the max volume of the vinyl by pressing a button and move a fader. then releasing the button and use the fader normally. Peace, great unit by the way !

@0x09c5 4 ай бұрын

🪡🥷

@ksl2003 4 ай бұрын

No aux vol and master vol on top of the deck … whoever design this has no understanding for portable starching …..

@Stoney-Jacksman 4 ай бұрын

3000 dollars?

@aaronb9630 Ай бұрын

Hong Kong dollars, I flipped out at first too. There's a spot in the US you can ge them for $380

@Stoney-Jacksman Ай бұрын

@@aaronb9630 thanks bro.

@johnbrazelton6130 4 ай бұрын

What record?

@chmielix Ай бұрын

Skratchlords from Cut & Paste

@TheGorillafoot 4 ай бұрын

Technology is crazy now.

@djlokii2549 5 ай бұрын

Where can i find this software djplayer pro

@user-iy5nb4el5n 6 ай бұрын

Very nice portable long wait made to order is why and don’t letter break it’s a wrap.Plusi started a few years ago on pT 01 usb to the scratch which was a joke cuz of the switch I thought it was a actual fader and no practice 7 inch that was 25 I had to wait on Stanton was the only ones who got it right Stanton came equipped with a innofader a real ultra pitch controller and 18650 batteries

@djslopoke 7 ай бұрын

Can someone post a video on how to change the little clear band on the tonearm. I heard that they snap, so I ordered replacements but do not know how to install.

@yoannp.8511 8 ай бұрын

I think it s ok for mixing but for scratching it's not very precise , the sample mark shifs all time

@marksystemed4678 9 ай бұрын

I ordered from headache sounds Hong Kong. Are they good? I just have to validate my order and they will send the omni

@emptyempty1310 11 ай бұрын

So could you record a normal vinyl through dvs?

@YuanSuScratch 11 ай бұрын

not free

@laputaindetamere3810 11 ай бұрын

Thanks

@ginbulag4000 Жыл бұрын

Thank you for this tutorial, I just pre-ordered a Black one. I'm already using 18650 batteries for my vape device and I'm planning to get new ones. My question is, does the OMNI require flat tops or with nipples? On the description it says between 1000-2000mah, is it ok to use 18650s that are higher than 2000mah? Thank you Cheers!

@display8580 Жыл бұрын

Hi, should I buy batteries with the button top or can I use the ones with a flat top? Also, are there any restrictions regarding the voltage specification of the battery?

@valentinephasha1468 Жыл бұрын

Smooth😮

@gregindartmouth Жыл бұрын

oh man, i wished it worked this well for me lol

@diggedydave Жыл бұрын

Hey guys! Can someone please explain the difference of the „blink“ meaning? On the website is written: CHARGING - BLINK FULLY CHARGED / BATTERIES LESS THAN 20% - BLINK Is there a difference in the speed of the blinking, when its fully charged and when its under 20% ? Thx!!

@MissJennjenn Жыл бұрын

Bangin! Yeeeeeees!

@AnalogRob Жыл бұрын

Wack only transformers

@d.b.cooper2052 Жыл бұрын

Amazing video buddy, I've had my OMNI since the second wave of these, back in 2020. Its absolutely my go-to, as far as practicing my cuts, & my scratches, & routines, etc.... I learned something new today, as far as the "fader calibration goes my friend. Now I scratch with my right hand, & crossfade with my left hand. So, if I wanted to set this up so that the left side fader is my cut in fader, & the right hand side fader is the volume fader, how do I complete that set up. I sort of understand the process by watching the video, but wanna make sure I dont screw up my set up indefinitely, ya know my friend. Also, how, & what is the best connection process, & set up, for DVS mode for Android devices, thanks man...👍🙏😎🔥💯🎧🎚️🎛️🎵

@adictiveadictive Жыл бұрын

Hey, I can't recalibrate my right fader on my omni and I barely even use it. Is there a fix? After recalibration, sound doesn't come on until the fader is like 20%to the left. You know how I can fix this? Thanks

@DJBILINGUAL Жыл бұрын

@@adictiveadictiveI have the same issue

@adictiveadictive Жыл бұрын

@@DJBILINGUAL Hey, you just reminded me that I reached out to headachesound and they responded a long time ago but I never did what they told me because I got sidetracked lol. Turns out there's a fix! I'll copy and paste the instructions they gave me... Hi, please take a look at this video: kzbin.info/www/bejne/h5aso5WDbaqMqs0 If the fader doesn’t behave like the video. Please do the followings. 1. open the bottom cover 2. turn on OMNI 3. move the problematic fader stem to the middle 4. press the “cal” button on that fader board, the blue led under the fader will stay on for 3 seconds. 5. move the fader stem to one end, hit “cal”, blue led flashes 2 times 6. move the fader stem to another end, hit “cal”, blue led flashes 3 times 7. redo the cut-in calibration by holding “fader and rev.” on OMNI and hit start button. 8. see if it work again or you could go to self test mode to have clearer figure. Hope this helps and good luck! Let me know..

@adictiveadictive Жыл бұрын

@d.b.cooper2052 If I'm understanding you correctly, I believe you just simply press the "fader" button and it switches it. Hope this helps, let me know..

@randiseriss Жыл бұрын

So great. Such a cool place to cut too

@kmic_acbtz Жыл бұрын

Is the Omni using the batteries ?

@theAristocrap 2 жыл бұрын

Great scratching Daniel. I am sad that importing this to Poland is quite an expensive and brings the cost to almost 500 freedom dollars.

@chungho5032 2 жыл бұрын

Why i don’t have record single But I can use fader 🤔🤔

@CreateActionLtd 2 жыл бұрын

Excellent demo. Thank you.

@JbGabriellee 2 жыл бұрын

這部香港人出品嗎？

@JbGabriellee 2 жыл бұрын

Where can I buy it at HongKong?😫

@djgiuseppe3197 2 жыл бұрын

Niiiiiiiiice

@lvt8studio 2 жыл бұрын

FRESH!

@nicholasxdgamer9030 2 жыл бұрын

Dope Video! I've Got an OMNI myself, and I gotta say, the ultra pitch and DVS feature is just awesome!

@Crftbt 2 жыл бұрын

Where is the low frequency clicking coming from?

@reneng5666 2 жыл бұрын

@damianchmielix

@chmielix 2 жыл бұрын

I'm not sure what you mean, but I didn't switch the EQ to scratch mode, to cut the lows, because I needed them for the drumming at the end and it was difficult enough for me to put the needle on the right track. Every extra move is an extra chance to fuck it up, so I always try to do as little as possible.

@JohnPuntoCom Ай бұрын

@@chmielixI was wondering you changed tracks w needle drop.. thought it was like scratch live cue point drop...you just arranged and played out on one long track and found the correct spot for drums. That makes this even tighter!

@chmielix Ай бұрын

@@JohnPuntoCom the tracks on the record are skipproof, so it makes it easier :)

@NoFlukes 2 жыл бұрын

Dope asf 👌

@jidapacharusirichai5987 2 жыл бұрын

ศุกร์

@evanrandall1675 2 жыл бұрын

Do you guys have an official website or store? I am having trouble finding these for sale

@bence3131 2 жыл бұрын

This is sick!!!!nice skills 💥I'll buy a white omni, on the next week, first scratch turntable, cant wait! 🌌

@joeljonsson313 2 жыл бұрын

does this work with the numark pt-01 scratch too?

@slimyzombie 2 жыл бұрын

Did u figure it out? Im having the same problem.. im using a regular 7” scratch sfx vinyl… maybe i need that special ‘serato control’ one? I have: Pt01 scratch and its respective usb cable Usb to Lighting camara adaptor Mixfader bluetooth fader iPhone 11 and Edjing/Mixfader app

@andyhsong 2 жыл бұрын

aw man will there be any matte black ones in stock soon??

@djmindcontrol1 2 жыл бұрын

Why does this sound so 8 bit and chirpy on your app.? Having hard time configuring it to dj payer pro as well. Do you need to get a subscription to the app? I can't get it to read a signal Bought new cord thinking it was that.. But still no luck. Any other apps work for omni?

@buddafingaz9403 2 жыл бұрын

Does it have to be an iPhone, whats up with Android?

@buddafingaz9403 2 жыл бұрын

How do you connect the DVS on this, haven't been able to since I purchased mine a few years back, thanx. Otherwise, its still amazing, but wanted to utilize that,as well 👍🙏💯🔥😎

@buddafingaz9403 2 жыл бұрын

Absolutely lovin my OMNI, amazing crossfaders, very nice turntable, sounds dope homie 👍🙏💯🔥😎

@onkelhiphop 2 жыл бұрын

I’m using numark PT 01 And a raiden rader everything works perfect but how to get rid of hamster mode in the settings off the app🤔 please help

@Jodunn 2 жыл бұрын

Hi guys, just got mine. I do not find any tutorial to set it with traktor on Mac. Can you help me :-)

@olusphone 2 жыл бұрын

Cant wait to get mine! ETA 17/11/2022 😁😁

@dj_hasz 2 жыл бұрын

Works on Android, too?

@XEEEEE-k7e 2 жыл бұрын

I just bought omni and received the goods today, but fader can not be tuned! It was fatal to me. Is there any way to solve it?

@headachesound6345 2 жыл бұрын

Please send us email, or DM via Facebook or Instagram.

@djfunkypete 2 жыл бұрын

@@headachesound6345 Hey, So I calibrated the faders and did the self test.. everything is operable, but I have no more sounds. My friends who had an Omni before tried to do the process for me as well, and still no sound? Could this be a defect with the speaker? What other troubleshooting methods should I try...

Ең жақсы KZbin

Пікірлер